Owner's manual

STOP+GO
The function sets all cooking zones that operate to the Keep Warm setting ( ).
The
function does not stop the timer function.
• To activate this function touch
. The symbol comes on.
• To deactivate this function touch
. The heat setting that you set before comes on.
When you change the heat settings, the function stops and the displays show the new heat
settings.
Lock
You can lock the sensors on the hob when the cooking zones operate.
First set the heat setting.
To activate this function touch
. The symbol comes on for 4 seconds.
The Timer stays on.
To deactivate this function touch
. The heat setting that you set before comes on.
When you change the heat setting, you deactivate this function.
When you deactivate the appliance, you also deactivate this function.
The child safety device
This function prevents an accidental operation of the hob.
To activate the child safety device
• The appliance is deactivated.
• Touch
for 4 seconds until the symbol flashes.
• Touch
in the time when symbol flashes, the symbol comes on for 4 seconds.
To deactivate the child safety device
• The appliance is deactivated.
• Touch
until the symbol flashes.
• Touch
in the time when symbol flashes, the symbol comes on for 4 seconds.
Overriding the child safety device for one cooking session
• Activate the cooking zone. The symbol
comes on. Touch until the symbol
comes on.
• Set the heat setting from position
in less than 4 seconds. You can operate the hob.
• The child safety operates after you deactivate the appliance.
OffSound Control (Deactivation and activation of the sounds)
Deactivation of the sounds
Deactivate the appliance.
Touch
for 3 seconds, sound operates. Touch , sound operates. Touch for 3 sec-
onds.
comes on, the sound is on. Touch , comes on, the sound is off.
When this function operates, you can hear sounds only when:
• the Minute Minder comes down
• The Count Down Timer comes down
• you put something on the control panel.
Operating instructions
25