User manual

6. Loosely turn in fixing plates from be-
low on the worktop and on the con-
nection bar.
7. Put the subsequent appliance in the
worktop cut out . Make sure that the
front ends of the appliances are on the
same level.
8. Tighten the fixing plate / retaining grip
screws.
9. Seal the gap between the worktop and
appliances and between appliances
with silicone.
10. Put some soapy water on the silicon.
11. Press the rubber shape with some
strength against the glass ceramic and
move it slowly along the space.
12. Do not touch the silicon until it be-
come hard, it can last about a day.
13. Carefully remove silicon that came out
with a shaving blade.
14. Clean glass ceramic fully.
TECHNICAL INFORMATION
Modell HC652600EB Prod.Nr. 941 560 808 00
Typ 55 TEP 01 AU 220 - 240 V 50 - 60 Hz
Induction 5,6 kW Made in Switzerland
Ser.Nr. .......... 5,6 kW
AEG
40 Technical information