DE IT Benutzerinformation Kochfeld Istruzioni per l’uso Piano cottura 2 28 HDP54106XB
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN............................................................................ 3 2. SICHERHEITSANWEISUNGEN................................................................................ 4 3. GERÄTEBESCHREIBUNG.........................................................................................7 4. TÄGLICHER GEBRAUCH..........................................................................................9 5. FLEXIBLE INDUKTIONSKOCHFLÄCHE......
DEUTSCH 1. 3 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.
www.aeg.com • • • • • • • • Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. Versuchen Sie nicht einen Brand mit Wasser zu löschen, sondern schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke. Legen Sie keine Gegenstände auf dem Kochfeld ab. Legen Sie keine Metallgegenstände wie Messer, Gabeln, Löffel oder Topfdeckel auf die Oberfläche des Kochfelds, da diese heiß werden können.
DEUTSCH Abstand für die Luftzirkulation vorhanden ist. • Der Boden des Geräts kann heiß werden. Achten Sie darauf eine feuerfeste Trennplatte unter dem Gerät anzubringen, damit der Boden nicht zugänglich ist. • Achten Sie darauf, dass zwischen der Arbeitsplatte und dem Gerät darunter ein Abstand von 2 mm zur Belüftung frei gelassen wird. Schäden, die durch das Fehlen eines Belüftungsabstands entstehen, sind von der Garantie ausgenommen. 2.2 Elektrischer Anschluss WARNUNG! Brand- und Stromschlaggefahr.
www.aeg.com • Die Lüftungsöffnungen dürfen nicht abgedeckt werden. • Lassen Sie das Gerät bei Betrieb nicht unbeaufsichtigt. • Schalten Sie die Kochzonen nach jedem Gebrauch aus. • Verlassen Sie sich nicht auf die Topferkennung. • Legen Sie kein Besteck und keine Topfdeckel auf die Kochzonen. Sie werden heiß. • Bedienen Sie das Gerät nicht mit feuchten oder nassen Händen oder wenn es mit Wasser in Kontakt gekommen ist. • Benutzen Sie das Gerät nicht als Arbeits- oder Abstellfläche.
DEUTSCH 7 2.6 Service Geräts wenden Sie sich an die zuständige kommunale Behörde vor Ort. • Trennen Sie das Gerät von der Stromversorgung. • Schneiden Sie das Netzkabel ab, und entsorgen Sie es. • Wenden Sie sich zur Reparatur des Geräts an einen autorisierten Kundendienst. • Verwenden Sie ausschließlich Originalersatzteile. 3. GERÄTEBESCHREIBUNG 3.1 Kochfeldanordnung 1 Induktionskochzone 2 Bedienfeld 3 Flexible Flächeninduktions-Kochzone bestehend aus vier Bereichen 1 1 3 2 3.
www.aeg.com 5 6 7 SenFunktion sorfeld Anmerkung - Kochstufenanzeige Zeigt die Kochstufe an. - Kochzonen-Anzeigen des Timers Zeigen an, für welche Kochzone die Zeit eingestellt wurde. - Timer-Anzeige Zeigt die Zeit in Minuten an. Hob²Hood Ein- und Ausschalten des manuellen Modus der Funktion. Power-Funktion Ein- und Ausschalten der Funktion. Einstellskala Einstellen der Kochstufe. - Auswählen der Kochzone. - Erhöhen oder Verringern der Zeit.
DEUTSCH 3.4 OptiHeat Control (Restwärmeanzeige, 3-stufig) WARNUNG! / / Es besteht Verbrennungsgefahr durch Restwärme. Die Anzeige zeigt die Restwärmestufe an. 9 Die Induktionskochzonen erzeugen die erforderliche Hitze zum Kochen direkt im Boden des Kochgeschirrs. Die Glaskeramik wird nur durch die Wärme des Kochgeschirrs erhitzt. 4. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. 4.1 Ein- und Ausschalten Berühren Sie 1 Sekunde lang , um das Kochfeld ein- oder auszuschalten. 4.
www.aeg.com leuchtet). Berühren Sie dann gleich danach die gewünschte Kochstufe. Nach Ausschalten der Funktion: Wählen Sie 3 Sekunden leuchtet . Die Restzeit wird auf 00 heruntergezählt. Die Kontrolllampe der Kochzone erlischt. auf. Ausschalten der Funktion: Ändern Sie die Kochstufe. die Kochzone mit Wenn die eingestellte Zeit abgelaufen ist, ertönt ein Signalton und 00 blinkt. Die Kochzone wird ausgeschaltet. 4.
DEUTSCH Ausschalten des Signaltons: Berühren Sie . Die Funktion hat keine Auswirkung auf den Kochzonenbetrieb. Schalten Sie das Kochfeld aus. Berühren Sie können das Bedienfeld sperren, wenn Kochzonen eingeschaltet sind. So wird verhindert, dass die Kochstufe versehentlich geändert wird. Stellen Sie zuerst die Kochstufe ein. Einschalten der Funktion:Berühren Sie . leuchtet 4 Sekunden.Der Timer bleibt eingeschaltet. Ausschalten der Funktion: Berühren Sie . Die vorherige Kochstufe wird angezeigt.
www.aeg.com Automatikbetrieb 4.11 Hob²Hood Diese innovative automatische Funktion verbindet das Kochfeld mit einer speziellen Dunstabzugshaube. Das Kochfeld und die Dunstabzugshaube kommunizieren mit Hilfe von Infrarotsignalen. Die Drehzahl des Lüfters wird automatisch eingestellt. Sie richtet sich nach dem eingestellten Modus und der Temperatur des heißesten Kochgeschirrs auf dem Kochfeld. Sie können den Lüfter auch manuell auf dem Bedienfeld des Kochfelds einstellen.
DEUTSCH Schalten Sie den Automatikbetrieb aus, um die Dunstabzugshaube direkt über deren Bedienfeld einzustellen. Wenn Sie nach Kochende das Kochfeld ausschalten, kann die Dunstabzugshaube noch eine gewisse Zeit in Betrieb sein. Nach dieser Zeit schaltet das System den Lüfter automatisch aus. Während der folgenden 30 Sekunden kann der Lüfter nicht wieder eingeschaltet werden. Manuelles Einstellen der Lüftergeschwindigkeit Sie können den Lüfter auch manuell einstellen.
www.aeg.com Fläche bedecken. Stellen Sie das Kochgeschirr mittig auf die ausgewählte Fläche. Stellen Sie Kochgeschirr mit einem Bodendurchmesser, der kleiner als 160 mm ist, mittig auf einen einzelnen Bereich. Richtige Position des Kochgeschirrs: 100-160mm Falsche Position des Kochgeschirrs: Stellen Sie Kochgeschirr mit einem Bodendurchmesser, der größer als 160 mm ist, mittig auf zwei Bereiche. 5.3 FlexiBridge Big Bridge Modus > 160 mm 5.
DEUTSCH 15 Richtige Position des Kochgeschirrs: Richtige Position des Kochgeschirrs: Um diesen Modus verwenden zu können, müssen Sie das Kochgeschirr auf die drei zusammen geschalteten Bereiche stellen. Wenn das Kochgeschirr nicht zwei Um diesen Modus verwenden zu können, müssen Sie das Kochgeschirr auf alle vier zusammen geschalteten Bereiche stellen. Wenn das Kochgeschirr nicht drei Bereiche bedeckt, zeigt das Display an und die Kochzone wird nach 2 Minuten ausgeschaltet.
www.aeg.com unterschiedlichen Kochstufen. Das Kochfeld erkennt die Position des Kochgeschirrs und stellt die Kochstufe entsprechend der Position ein. Sie können das Kochgeschirr auf den vorderen, mittleren oder hinteren Bereich stellen. Der vordere Bereich hat die höchste Kochstufe. Sie können die Kochstufe durch Verschieben des Kochgeschirrs auf den mittleren oder hinteren Bereich verringern. Kochstufe an. Ändern Sie bei Bedarf die Kochstufe mit der linken vorderen Einstellskala.
DEUTSCH 6.1 Kochgeschirr Das Kochgeschirr wird bei Induktionskochzonen durch ein starkes Magnetfeld sehr schnell erhitzt. Benutzen Sie für die Induktionskochzonen geeignetes Kochgeschirr. Kochgeschirrmaterial • Geeignet: Gusseisen, Stahl, emaillierter Stahl, Edelstahl, ein mehrlagiger Topfboden (wenn vom Hersteller als geeignet markiert). • Nicht geeignet: Aluminium, Kupfer, Messing, Glas, Keramik, Porzellan.
www.aeg.com Kochstufe Verwendung: Dauer (Min.) Hinweise Warmhalten von gegarten Speisen. Nach Bedarf Legen Sie einen Deckel auf das Kochgeschirr. 1-3 Sauce Hollandaise, Schmelzen von: Butter, Schokolade, Gelatine. 5 - 25 Gelegentlich umrühren. 1-3 Stocken: Lockere Omeletts, gebackene Eier. 10 - 40 Mit Deckel garen. 3-5 Köcheln von Reis und Milchge- 25 - 50 richten, Erhitzen von Fertiggerichten. Mindestens doppelte Menge Flüssigkeit zum Reis geben, Milchgerichte zwischendurch umrühren.
DEUTSCH 19 Dunstabzugshauben mit der Funktion Hob²Hood Die komplette Palette von Dunstabzugshauben, die mit dieser Funktion ausgestattet sind, finden Sie auf unserer Verbraucher-Website. Die AEG Dunstabzugshauben, die mit dieser Funktion ausgestattet sind, sind mit dem Symbol gekennzeichnet. Andere Geräte mit Fernbedienung können das Signal beeinträchtigen. Um dies zu vermeiden, die Fernbedienung des Gerätes und des Kochfelds nicht gleichzeitig verwenden. 7.
www.aeg.com 8. FEHLERSUCHE WARNUNG! Siehe Kapitel Sicherheitshinweise. 8.1 Was tun, wenn ... Problem Mögliche Ursache Das Kochfeld kann nicht ein- Das Kochfeld ist nicht oder geschaltet oder bedient wer- nicht ordnungsgemäß an die den. Spannungsversorgung angeschlossen. Abhilfe Prüfen Sie, ob das Kochfeld ordnungsgemäß an die Spannungsversorgung angeschlossen ist. Nehmen Sie dazu den Anschlussplan zu Hilfe. Die Sicherung hat ausgelöst.
DEUTSCH Problem Mögliche Ursache 21 Abhilfe Die Funktion Hob²Hood wird Sie haben das Bedienfeld nicht ausgeführt. bedeckt. Entfernen Sie den Gegenstand vom Bedienfeld. Die Funktion Ankochautomatik wird nicht ausgeführt. Die Kochzone ist heiß. Lassen Sie die Kochzone lange genug abkühlen. Die höchste Kochstufe ist eingestellt. Die höchste Kochstufe hat die gleiche Leistung wie die Funktion. Die Kochstufe schaltet zwischen zwei Kochstufen hin und her. Die Funktion Power-Management ist in Betrieb.
www.aeg.com Problem Mögliche Ursache Abhilfe leuchtet. Die Funktion KindersicheSiehe Kapitel „Täglicher Gerung oder Tastensperre ist in brauch“. Betrieb. leuchtet. Es wurde kein Kochgeschirr auf die Kochzone gestellt. Stellen Sie Kochgeschirr auf die Kochzone. Sie verwenden ungeeignetes Kochgeschirr. Benutzen Sie geeignetes Kochgeschirr. Siehe Kapitel „Tipps und Hinweise“. Der Durchmesser des Kochgeschirrbodens ist zu klein für die Kochzone.
DEUTSCH Problem leuchtet. 23 Mögliche Ursache Abhilfe Ein Fehler ist aufgetreten, weil ein Kochgeschirr leer gekocht ist. Abschaltautomatik und der Überhitzungsschutz für die Kochzone ist eingeschaltet. Schalten Sie das Kochfeld aus. Entfernen Sie das heiße Kochgeschirr. Schalten Sie die Kochzone nach etwa 30 Sekunden wieder ein. Wenn das Kochgeschirr das Problem verursacht hat, erlischt die Fehlermeldung. Restwärmeanzeige kann eingeschaltet bleiben. Lassen Sie das Kochgeschirr lange genug abkühlen.
www.aeg.com 9.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
DEUTSCH 25 min. 12 mm min. 2 mm 9.5 Schutzboden Falls Sie einen Schutzboden (optionales Zubehör) verwenden, ist die Einhaltung des vorderen Belüftungsabstands von 2 mm und die Schutzmatte direkt unter dem Gerät nicht nötig. Der Schutzboden ist möglicherweise in einigen Ländern nicht erhältlich. Wenden Sie sich an Ihren Händler vor Ort. Wenn Sie das Kochfeld über einem Backofen einsetzen, können Sie den Schutzboden nicht verwenden. 10. TECHNISCHE DATEN 10.
www.aeg.com 10.2 Technische Daten der Kochzonen Kochzone Nennleistung (höchste Kochstufe) [W] Power-Funktion Power-Funktion Durchmesser [W] maximale Eindes Kochgeschaltdauer schirrs [mm] [Min.] Vorne rechts 1400 2500 4 125 - 145 Hinten rechts 1800 2800 10 145 - 180 Flexible Indukti- 2300 onskochfläche 3200 10 min. 100 Die Leistung der Kochzonen kann geringfügig von den Daten in der Tabelle abweichen. Sie ändert sich je nach Material und Abmessungen des Kochgeschirrs.
DEUTSCH • Wenn Sie Wasser erwärmen, verwenden Sie nur die benötigte Menge. • Decken Sie Kochgeschirr, wenn möglich, mit einem Deckel ab. • Stellen Sie Kochgeschirr auf die Kochzone, bevor Sie sie einschalten. • Stellen Sie kleineres Kochgeschirr auf die kleineren Kochzonen. 27 • Stellen Sie das Kochgeschirr mittig auf die Kochzone. • Nutzen Sie die Restwärme, um die Speisen warm zu halten oder zu schmelzen. 12. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol .
www.aeg.com INDICE 1. INFORMAZIONI PER LA SICUREZZA.................................................................... 29 2. ISTRUZIONI DI SICUREZZA....................................................................................30 3. DESCRIZIONE DEL PRODOTTO........................................................................... 33 4. UTILIZZO QUOTIDIANO........................................................................................ 35 5. ZONA DI COTTURA A INDUZIONE FLESSIBILE..........
ITALIANO 1. 29 INFORMAZIONI PER LA SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. Il produttore non è responsabile se un'installazione ed un uso non corretto dell'apparecchiatura provocano lesioni e danni. Tenere sempre le istruzioni a portata di mano come riferimento futuro. 1.
www.aeg.com • • • • • • • • • Non utilizzare un timer esterno o un sistema di controllo remoto distinto per mettere in funzione l'apparecchiatura. Non lasciare mai il piano di cottura incustodito durante la preparazione di cibi in quanto olio e grassi potrebbero provocare un incendio. Non tentare mai di spegnere un incendio con dell'acqua; spegnere l'apparecchiatura e coprire le fiamme ad es. con un coperchio o una coperta di protezione dal fuoco. Non conservare nulla sulle superfici di cottura.
ITALIANO • Proteggere la base dell'apparecchiatura da vapore e umidità. • Non installare l'apparecchiatura accanto ad una porta o sotto una finestra, per evitare che pentole calde cadano dall'apparecchiatura quando la porta o la finestra sono aperte. • Se l'apparecchiatura viene installata sopra dei cassetti, assicurarsi che lo spazio, tra la base dell'apparecchiatura e il cassetto superiore, sia sufficiente per il ricircolo d'aria. • La base dell'apparecchiatura può surriscaldarsi.
www.aeg.com • Utilizzare l’apparecchiatura in un ambiente domestico. • Non apportare modifiche alle specifiche di questa apparecchiatura. • Accertarsi che le fessure di ventilazione non siano ostruite. • Non lasciare mai l'apparecchiatura incustodita durante il funzionamento. • Spegnere la zona di cottura dopo ogni utilizzo. • Non fare affidamento sul rilevatore di pentole. • Non appoggiare posate o coperchi sulle zone di cottura. Possono diventare roventi.
ITALIANO • Contattare le autorità locali per ricevere informazioni su come smaltire correttamente l'apparecchiatura. • Staccare la spina dall'alimentazione elettrica. • Tagliare il cavo di rete e smaltirlo. 33 2.6 Assistenza Tecnica • Per riparare l'apparecchiatura contattare il Centro di Assistenza Autorizzato. • Utilizzare esclusivamente ricambi originali. 3. DESCRIZIONE DEL PRODOTTO 3.
www.aeg.com 5 6 7 Tasto sensore Funzione Commento - Display livello di potenza Per mostrare il livello di potenza. - Spie del timer delle zone di cottura Indica per quale zona è impostato il tempo. - Display timer Indica il tempo in minuti. Hob²Hood Per attivare e disattivare la modalità manuale della funzione. Funzione Power Per attivare e disattivare la funzione. Barra dei comandi Per impostare un livello di potenza. - Per selezionare la zona di cottura.
ITALIANO 3.4 OptiHeat Control (indicatore di calore residuo su 3 livelli) ATTENZIONE! / / Il calore residuo può essere causa di ustioni. La spia indica il livello di calore residuo. 35 Le zone di cottura a induzione generano il calore richiesto per la cottura direttamente sul fondo della pentola. Il piano in vetroceramica viene leggermente riscaldato dal calore residuo delle pentole. 4. UTILIZZO QUOTIDIANO ATTENZIONE! Fare riferimento ai capitoli sulla sicurezza. 4.
www.aeg.com Per attivare la funzione, la zona di cottura deve essere fredda. Per attivare la funzione per una zona Per visualizzare il tempo residuo: selezionare la zona di cottura con . La spia della zona di cottura comincia a lampeggiare rapidamente. Sul display compare il tempo residuo. di cottura: sfiorare ( si accende). Selezionare immediatamente il livello di Per modificare l’ora: selezionare la zona potenza necessario. Dopo 3 secondi si accende.
ITALIANO attivo e le zone di cottura non sono in funzione (il display del livello di potenza indica ). secondi. . per 4 si accende. Disattivare il piano di cottura con Per attivare la funzione: sfiorare . Per escludere la funzione per una sola operazione di cottura: attivare il piano Sfiorare il tasto o del timer per selezionare la durata. Allo scadere del tempo stabilito, viene emesso un segnale acustico e 00 lampeggia. di cottura con . si accende. Sfiorare il tasto per 4 secondi.
www.aeg.com • La funzione si attiva quando l'assorbimento massimo delle zone di cottura collegate ad una singola fase supera i 3.700 W. • La funzione riduce la potenza delle altre zone di cottura collegate alla stessa fase. • Il display del livello di potenza per le zone a ridotta potenza, passa da un livello all'altro. Modalità automatiche Illumina- Ebollizione zione1) automatica Si tratta di una funzione automatica avanzata che collega il piano di cottura ad una cappa speciale.
ITALIANO Quando si termina la cottura e si disattiva il piano di cottura, la ventola della cappa rimane in funzione ancora per un pò. Trascorso questo tempo, il sistema disattiva la ventola automaticamente ed evita l'attivazione accidentale della stessa per i 30 secondi successivi. Funzionamento manuale della velocità della ventola È anche possibile attivare la funzione manualmente. Per farlo sfiorare quando il piano di cottura è attivo.
www.aeg.com Posizione errata delle pentole: 100-160mm Sistemare le pentole con il diametro del fondo superiore a 160 mm al centro tra due sezioni. 5.3 Modalità Big Bridge FlexiBridge > 160 mm 5.2 Modalità standard FlexiBridge Questa modalità si attiva quando si attiva il piano di cottura. Questa collega le sezioni in due zone di cottura separate. È possibile impostare il livello di potenza per ciascuna zona separatamente. Utilizzare le due barre di controllo laterali sinistre.
ITALIANO Posizione errata delle pentole: 41 Posizione errata delle pentole: 5.4 Modalità Max Bridge FlexiBridge Per attivare la modalità premere finché non appare la spia della modalità corretta. Questa modalità collega tutte le sezioni in una sola zona di cottura. Per impostare il livello di potenza utilizzare una delle barre di controllo di sinistra. Posizione corretta delle pentole: Per utilizzare questa modalità è necessario posizionare le pentole sulle quattro sezioni collegate.
www.aeg.com anteriore, e per la posizione centrale per la posizione posteriore. Informazioni generali: • 160 mm è il diametro minimo del fondo delle pentole per questa funzione. • Il display del livello di potenza per la barra di controllo posteriore sinistra indica la posizione della pentola sulla zona di cottura a induzione. Anteriore , centrale , posteriore . È possibile modificare i livelli di potenza per ciascuna posizione separatamente.
ITALIANO • una piccola quantità d'acqua su una zona di cottura a induzione impostata sul livello di cottura massimo si riscalda in breve tempo. • una calamita si attacca al fondo delle pentole. La stampa sulla zona di cottura a induzione flessibile può sporcarsi o cambiare colore a causa dello spostamento delle pentole. La zona può essere pulita normalmente. Il fondo delle pentole dovrebbe essere il più possibile spesso e piano.
www.aeg.com Livello di potenza Usare per: Tempo (min.) Suggerimenti 3-5 Cuocere riso e pietanze a base 25 - 50 di latte, riscaldare pietanze pronte. Aggiungere al riso almeno una doppia quantità di liquido, mescolare di tanto in tanto i preparati a base di latte. 5-7 Cuocere a vapore verdure, pe- 20 - 45 sce, carne. Aggiungere alcuni cucchiai di liquido. 7-9 Cuocere al vapore le patate. 20 - 60 Usare al max. ¼ l di acqua per 750 g di patate.
ITALIANO Potrebbe accadere che altre apparecchiature con controllo a distanza blocchino il segnale. Per evitarlo non mettere in funzione l'apparecchiature con il controllo a distanza e il piano di cottura contemporaneamente. 45 Cappe da cucina con la funzione Hob²Hood Per scoprire l'intera gamma di cappe da cucina compatibili con questa funzione fare riferimento al sito web del nostro cliente. Le cappe da cucina AEG compatibili con questa funzione devono riportare il simbolo . 7.
www.aeg.com Problema Causa possibile Soluzione È scattato il fusibile. Verificare se l'anomalia di funzionamento sia dovuta al fusibile. Nel caso in cui il fusibile continui a scattare, rivolgersi ad un elettricista qualificato. Accendere di nuovo il piano di cottura e impostare il livello di potenza in meno di 10 secondi. Sono stati sfiorati 2 o più tasti sensore contemporaneamente. Sfiorare un tasto sensore alla volta.
ITALIANO 47 Problema Causa possibile Soluzione Assenza di segnale quando si toccano i tasti sensore del pannello. I segnali acustici sono disattivati. Attivarli. Fare riferimento al capitolo "Utilizzo quotidiano". La zona di cottura a induzione flessibile non scalda le pentole. La pentola è stata sistemata Sistemare la pentola in moin modo errato sulla zona di do adeguato sulla zona di cottura a induzione flessibile. cottura a induzione flessibile.
www.aeg.com Problema e un numero si accendono. Causa possibile Soluzione La funzione FlexiBridge è attiva. Una o più sezioni della modalità di funzionamento attiva non sono coperte dalla pentola. Sistemare la pentola sul numero corretto di sezioni della modalità di funzionamento attiva o modificare la modalità. Fare riferimento al capitolo "Zona di cottura a induzione flessibile". La funzione ProCook è attiva. Due pentole sono state posizionate sulla zona di cottura a induzione flessibile.
ITALIANO 49 9. INSTALLAZIONE ATTENZIONE! Fare riferimento ai capitoli sulla sicurezza. 9.1 Prima dell'installazione Prima di installare il piano di cottura, annotare l'informazione riportata di seguito presente sulla targhetta dei dati. La targhetta dei dati è applicata sul lato inferiore del piano di cottura. Numero di serie ........................... 9.2 Piani di cottura da incasso Utilizzare esclusivamente piani di cottura da incasso solo dopo l'installazione in 9.4 Montaggio min. 500mm min.
www.aeg.com min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm min 30 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min. 55mm 490+1mm 560+1mm min. 12 mm min.
ITALIANO 9.5 Protezione da sovratensioni 51 Se si utilizza una protezione da sovratensioni (accessorio aggiuntivo), lo spazio di ventilazione anteriore di 2 mm e il pavimento protettivo appena sotto al piano di cottura non sono necessari. La protezione da sovratensioni accessoria potrebbe non essere disponibile in alcuni paesi. Contattare il proprio fornitore locale. Non è possibile utilizzare la protezione da sovratensioni se l'apparecchiatura è installata su di un forno. 10. DATI TECNICI 10.
www.aeg.com 11. EFFICIENZA ENERGETICA 11.1 Informazioni prodotto conformi alla norma UE 66/2014 Identificativo modello HDP54106XB Tipo di piano di cottura Piano di cottura da incasso Numero di zone di cottura 2 Numero di zone di cottura 1 Tecnologia di calore Induzione Diametro delle zone di cot- Anteriore destra tura circolari (Ø) Posteriore destra 14,5 cm 18,0 cm Lunghezza (L) e profondità (P) della zona di cottura Sinistra L 45.3 cm P 21.
ITALIANO 53
www.aeg.
ITALIANO 55
867327234-A-452015 www.aeg.