Operation Manual

Errors Cause Solution
No sound TV operation:
Audio cable not connected
Warning:
Turn of the device prior to troubleshooting.
Ensure correct connection of the audio cable.
Check if the plug is plugged tightly into the out
let.
Volume set too low. Increase volume by pressing VOL + volume key
(Fig. 1/4, 5 / Fig. 3/23, 22).
Headphones plugged in
incorrectly.
Checkforcorrecttoftheheadphoneplug.
Amplierturnedoff. Ifyouareusinganamplierforaudiooutput
check:Iftheamplieristurnedon.
Default settings incorrect. Check the default settings of the DVD-Player.
Remote does not
function
Incorrect position. The remote control does not point toward the
DVD-Player.
Distance too far. Ensure that the distance between remote control
and device does not exceed 5 meters.
Empty battery. Change battery in the remote control.
Titles are played in
wrong order
Playlist is used. Delete playlist.
DVD does not play DVDnotnalized. UseanalizedDVD.
No DVB-T recep-
tion
The received channel is too
weak for reception through
the telescope antenna.
Re-adjust the antenna or connect your main
antenna or room antenna.
No DVB-T reception in your Broadcast information is available on the Internet
region. or at your specialist dealer.
The received channel is to
weak.
Re-adjust the antenna.
Distorted picture The received channel is too
weak.
Re-adjust the antenna.
75
English