User Manual

7. TROUBLESHOOTING
WARNING !
Refer to Safety chapters
7.1 What to do if…
Problem Possible cause Remedy
You cannot activate or
operate the fryer.
The fryer is not connected to
an electrical supply or it is
connected incorrectly
Check if the fryer is correctly
connected to the electrical
supply. Refer to the connection
diagram.
The fuse is blown. Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a qualified
electrician.
The deep fat fryer does
not get hot.
There is no mains power to
the appliance.
The safety cut-out has been
activated (see "Overheat
prevention").
The oil has an unpleasant
odour.
The oil is not suitable.
The oil needs changing.
Change the oil.
The food is not crisp
and golden.
The oil was not hot enough.
The frying time was not long
enough.
Select a higher temperature.
The frying basket has been
overloaded. Do not fry so
much at once.
Allow the food to fry for a
sufficient time.
13