User Manual

8. INSTALLATION
This fryer is built into a work surface
or kitchen unit by simply cutting a
hole the corresponding shape.
Any support may be suitable:
brickwork, timber, metal, granite,
laminate, etc.
Dimensions of appliance:
520 x 360 mm
Dimensions of hole cut in work
surface: 490 x 340 mm
Important: Before using your
appliance, please read carefully
this manual to become familiar
quickly with its operation.
 It is necessary to provide a
bipolar cut-off device in the power
supply circuit, where the opening
of the contacts is more than 3
mm.
 The plug must be accessible
after installation.
 If the supply lead is damaged, it
must be replaced by an
equivalent lead (H05RNF
3x1mm²) available from the after-
sales department.
 A 16-ampere fuse is necessary
 Your fryer uses 2,200 watts. It is
therefore necessary that your
supply can provide this power
without danger. IT IS VITAL that
your fryer be connected to
earth.
14