HG694550 USER MANUAL FR Notice d'utilisation Table de cuisson
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................2 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. DESCRIPTION DE L'APPAREIL...................................................................................8 4. UTILISATION QUOTIDIENNE.................................................................................... 8 5. CONSEILS................
FRANÇAIS 3 utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables • • • • • • • Cet appareil peut être utilisé par des enfants de plus de 8 ans et par des personnes dont les capacités sont réduites, à condition qu'ils soient surveillés ou qu'ils aient reçu des instructions concernant l'utilisation sécurisée de l'appareil et qu'ils comprennent les risques encourus.
www.aeg.com • • • • • • • • • • sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge. ATTENTION : Toute cuisson doit être surveillée. Une cuisson courte doit être surveillée en permanence. AVERTISSEMENT : Risque d'incendie : Ne rangez pas d'objets sur la surface de cuisson.
FRANÇAIS • 5 parties pouvant atteindre des températures supérieures de 50 °C à la température ambiante. AVERTISSEMENT : Utilisez uniquement les dispositifs de protection pour table de cuisson conçus ou indiqués comme adaptés par le fabricant de l'appareil de cuisson dans les instructions d'utilisation, ou les dispositifs de protection pour table de cuisson intégrés à l'appareil. L'utilisation de dispositifs de protection non adaptés peut entraîner des accidents. 2.
www.aeg.com • • • • • • • • surfaces brûlantes de l'appareil ou les récipients brûlants lorsque vous branchez l'appareil à des prises électriques situées à proximité. N'utilisez pas d'adaptateurs multiprises ni de rallonges. Veillez à ne pas endommager la fiche secteur (si présente) ni le câble d'alimentation. Contactez notre centre de maintenance agréé ou un électricien pour remplacer le câble d'alimentation s'il est endommagé.
FRANÇAIS incendie à température plus faible que l'huile n'ayant jamais servi. • Ne placez pas de produits inflammables ou d'éléments imbibés de produits inflammables à l'intérieur ou à proximité de l'appareil, ni sur celui-ci. AVERTISSEMENT! Risque d'endommagement de l'appareil. • Ne laissez pas de récipients chauds sur le bandeau de commande. • Ne laissez pas le contenu des récipients de cuisson s'évaporer complètement. • Prenez soin de ne pas laisser tomber d'objets ou de récipients sur l'appareil.
www.aeg.com 2.7 Maintenance • Pour réparer l'appareil, contactez un service après-vente agréé. • Utilisez exclusivement des pièces d'origine. 3. DESCRIPTION DE L'APPAREIL 3.1 Description de la table de cuisson 1 1 2 3 4 2 Brûleur semi-rapide Brûleur à triple couronne Brûleur auxiliaire Manettes de commande 3 4 3.
FRANÇAIS A B C D A. B. C. D. Chapeau du brûleur Couronne du brûleur Bougie d'allumage Thermocouple 4.2 Allumage du brûleur Allumez toujours le brûleur avant de poser un récipient dessus. AVERTISSEMENT! Faites très attention lorsque vous utilisez une flamme nue dans une cuisine. Le fabricant décline toute responsabilité en cas de mauvaise utilisation de la flamme. 1. Enfoncez la manette et tournez-la vers la gauche jusqu'à la position d'arrivée de gaz maximale ( ). 2.
www.aeg.com 4.3 Arrêt du brûleur AVERTISSEMENT! Abaissez ou coupez toujours la flamme avant de retirer les récipients du brûleur. Pour éteindre la flamme, tournez la manette sur la position Arrêt . 5. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. ATTENTION! Assurez-vous que les récipients de cuisson sont bien centrés sur le brûleur afin de garantir leur stabilité et de réduire la consommation de gaz. 5.
FRANÇAIS AVERTISSEMENT! N'utilisez pas de couteau, de grattoir ou d'instruments similaires pour nettoyer les surfaces en verre ou entre les bords des brûleurs et l'encadrement (si présent). • Lavez les éléments en acier inoxydable à l'eau, puis séchez-les à l'aide d'un chiffon doux. 6.2 Supports de casserole Les supports de casserole ne sont pas adaptés au lavage dans un lave-vaisselle. Ils doivent être lavés à la main. 1. Retirez les supports de casserole pour nettoyer facilement la table de cuisson.
www.aeg.com 7.1 En cas d'anomalie de fonctionnement Problème Cause probable Il n'y a aucune étincelle lors- La table de cuisson n'est pas que vous essayez d'activer le connectée à une source générateur d'étincelle. d'alimentation électrique ou le branchement est incorrect. Le fusible a disjoncté. Solution Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique. Vérifiez que le fusible est bien la cause de l'anomalie.
FRANÇAIS 13 7.3 Étiquettes fournies dans le sachet des accessoires Collez les étiquettes adhésives comme indiqué ci-dessous : A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A. Collez-la sur la carte de garantie et envoyez cette partie (le cas échéant). B. Collez-la sur la carte de garantie et conservez cette partie (le cas échéant). C. Collez-la sur la notice d'utilisation. 8.
www.aeg.com Assurez-vous que la pression de l'alimentation en gaz de l'appareil correspond aux valeurs recommandées. Le raccordement réglable est relié à la rampe complète par un écrou fileté G 1/2 po. Vissez les pièces sans forcer, ajustez le raccordement dans le sens souhaité, puis serrez le tout. A B C A. Extrémité du tuyau avec écrou B. Joint fourni avec l'appareil C.
FRANÇAIS 4. Assemblez les pièces et suivez la même procédure dans l'ordre inverse. 5. Remplacez la plaque signalétique (qui se trouve près du tuyau d'arrivée de gaz) par celle correspondant au nouveau type d'alimentation en gaz. Vous trouverez cette plaque dans le sachet fourni avec l'appareil. Si la pression de l'alimentation en gaz peut être modifiée ou est différente de la pression nécessaire, vous devez monter un système de réglage de la pression sur le tuyau d'arrivée de gaz. 8.
www.aeg.com 8.7 Montage Si un meuble est installé à 400 mm au-dessus de la table de cuisson, vous devez laisser une distance de sécurité minimale de 50 mm à gauche ou à droite du bord de la table de cuisson. 1. 5. 2. 6. A 3. 7. min. 150 mm A) équerre fournie min. 650 mm min. 55 mm 30 mm 490 mm 560 mm 4. 400 mm 50 mm ATTENTION! Installez l'appareil uniquement sur un plan de travail dont la surface est plane. 8.
FRANÇAIS Élément de cuisine avec une porte 17 A. Panneau amovible B. Espace pour les branchements Élément de cuisine avec four Les branchements électriques de la table de cuisson et du four doivent être installés séparément pour des raisons de sécurité et pour permettre un retrait facile du four de l'ensemble. min 6 mm min 40 mm A B min 5 mm (max 150 mm) 60 mm 9. CARACTÉRISTIQUES TECHNIQUES 9.1 Dimensions de la table de cuisson Largeur 576 mm Profondeur 516 mm 9.
www.aeg.com Raccordement au gaz : G 1/2" Classe de l'appareil : 3 9.4 Brûleurs à gaz pour GAZ NATUREL G20/G25 20/25 mbar BRÛLEUR PUISSANCE NORMALE kW PUISSANCE MINIMALE kW CARACTÉRISTIQUE DE L'INJECTEUR Triple couronne 3,8 1,4 146 Semi-rapide 1,9 0,75 96x Auxiliaire 1,0 0,45 70 9.
FRANÇAIS 19 10.2 Économies d'énergie • Avant utilisation, assurez-vous que les brûleurs et les supports de casseroles sont correctement assemblés. • Utilisez uniquement des récipients dont le diamètre correspond aux dimensions des brûleurs. • Mettez le récipient au centre du brûleur. • Lorsque vous chauffez de l'eau, n'utilisez que la quantité d'eau dont vous avez besoin. • Si possible, couvrez toujours les récipients avec un couvercle pendant la cuisson.
867321916-C-422017 www.aeg.