HG795450 FR IT USER MANUAL Notice d'utilisation Table de cuisson Istruzioni per l’uso Piano cottura 2 20
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. DESCRIPTION DE L'APPAREIL...................................................................................8 4. UTILISATION QUOTIDIENNE.................................................................................... 8 5. CONSEILS................
FRANÇAIS 1. 3 INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • • tenus à l'écart, à moins d'être surveillés en permanence. Ne faites pas fonctionner l'appareil avec un minuteur externe ou un système de commande à distance. AVERTISSEMENT : Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau.
FRANÇAIS • • 5 de surtension de catégorie III. Le fil de terre n'est pas concerné. Lorsque vous acheminez le câble d'alimentation, assurez-vous qu'il n'entre pas en contact direct (par exemple, à l'aide d'un manchon isolant) avec des parties pouvant atteindre des températures supérieures de 50 °C à la température ambiante.
www.aeg.com • • • • • • • • • • • • • et inapproprié ou une fiche (si présente) non serrée peuvent être à l'origine d'une surchauffe des bornes. Utilisez le câble d'alimentation électrique approprié. Ne laissez pas le câble d'alimentation s'emmêler. Assurez-vous qu'une protection antiélectrocution est installée. Utilisez un collier anti-traction sur le câble.
FRANÇAIS AVERTISSEMENT! Risque d'incendie et d'explosion. • Les graisses et l'huile chaudes peuvent dégager des vapeurs inflammables. Tenez les flammes ou les objets chauds éloignés des graisses et de l'huile lorsque vous vous en servez pour cuisiner. • Les vapeurs dégagées par l'huile très chaude peuvent provoquer une combustion spontanée. • L'huile qui a servi contient des restes d'aliments pouvant provoquer un incendie à température plus faible que l'huile n'ayant jamais servi.
www.aeg.com 2.6 Mise au rebut • Coupez le câble d'alimentation au ras de l'appareil et mettez-le au rebut. • Aplatissez les tuyaux de gaz externes. AVERTISSEMENT! Risque de blessure ou d'asphyxie. 2.7 Maintenance • Contactez votre service municipal pour obtenir des informations sur la marche à suivre pour mettre l'appareil au rebut. • Débranchez l'appareil de l'alimentation électrique. • Pour réparer l'appareil, contactez un service après-vente agréé. • Utilisez exclusivement des pièces d'origine.
FRANÇAIS 4.1 Vue d'ensemble des brûleurs 1. Enfoncez la manette et tournez-la vers la gauche jusqu'à la position A B C D A B C D A. B. C. D. 9 Chapeau du brûleur Couronne du brûleur Bougie d'allumage Thermocouple 4.2 Allumage du brûleur Allumez toujours le brûleur avant de poser un récipient dessus. AVERTISSEMENT! Faites très attention lorsque vous utilisez une flamme nue dans une cuisine. Le fabricant décline toute responsabilité en cas de mauvaise utilisation de la flamme.
www.aeg.com Le générateur d'étincelles peut s'activer automatiquement lorsque vous allumez l'alimentation secteur, après l'installation ou après une coupure de courant. C'est normal. 4.3 Arrêt du brûleur Pour éteindre la flamme, tournez la manette sur la position Arrêt . AVERTISSEMENT! Abaissez ou coupez toujours la flamme avant de retirer les récipients du brûleur. La table de cuisson est fournie avec les valves de distribution progressive. Elles rendent le réglage de la flamme plus précis. 5.
FRANÇAIS 11 6. ENTRETIEN ET NETTOYAGE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 6.1 Informations générales • Nettoyez la table de cuisson après chaque utilisation. • Utilisez toujours un plat de cuisson dont le fond est propre. • Les rayures ou les taches sombres sur la surface n'ont aucune incidence sur le fonctionnement de la table de cuisson. • Utilisez un nettoyant spécialement adapté à la surface de la table de cuisson.
www.aeg.com 6.5 Entretien périodique Contactez périodiquement votre service après-vente pour contrôler l'état du tuyau d'arrivée de gaz et du régulateur de pression si votre installation en est équipée. 7. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 7.
FRANÇAIS 7.3 Étiquettes fournies dans le sachet des accessoires Collez les étiquettes adhésives comme indiqué ci-dessous : A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A. Collez-la sur la carte de garantie et envoyez cette partie (le cas échéant). B. Collez-la sur la carte de garantie et conservez cette partie (le cas échéant). C. Collez-la sur la notice d'utilisation. 8.
www.aeg.com Effectuez un raccordement fixe (« rigide ») ou utilisez un tuyau flexible en acier inoxydable selon les normes en vigueur. Si vous utilisez des tuyaux flexibles métalliques, ils ne doivent pas entrer en contact avec des parties mobiles ni être comprimés. Soyez également vigilant lorsque la table est installée avec un four. Assurez-vous que la pression de l'alimentation en gaz de l'appareil correspond aux valeurs recommandées.
FRANÇAIS 15 conforme aux normes et réglementations. • Le câble d'alimentation ne doit pas être exposé à une température supérieure à 90 °C. Utilisez les colliers situés sur le côté de l'appareil pour éviter tout contact entre le câble et l'appareil sous la table de cuisson. A 5. Si vous passez : • du gaz naturel G20 20 mbar au gaz liquéfié, serrez entièrement la vis de réglage.
www.aeg.com 2. A 7. 3. min. 150 mm A) équerre fournie min. 650 mm min. 55 mm 30 mm 490 mm 680 mm ATTENTION! Installez l'appareil uniquement sur un plan de travail dont la surface est plane. 4. 400 mm 50 mm Si un meuble est installé à 400 mm au-dessus de la table de cuisson, vous devez laisser une distance de sécurité minimale de 50 mm à gauche ou à droite du bord de la table de cuisson. 5. 6. 8.
FRANÇAIS Élément de cuisine avec une porte 17 A. Panneau amovible B. Espace pour les branchements Élément de cuisine avec four Les branchements électriques de la table de cuisson et du four doivent être installés séparément pour des raisons de sécurité et pour permettre un retrait facile du four de l'ensemble. min 6 mm A B min 40 mm min 5 mm (max 150 mm) 60 mm 9. CARACTÉRISTIQUES TECHNIQUES 9.1 Dimensions de la table de cuisson Largeur 696 mm Profondeur 516 mm 9.
www.aeg.com Classe de l'appareil : 3 9.4 Brûleurs à gaz pour GAZ NATUREL G20 20 mbar BRÛLEUR PUISSANCE NORMALE kW PUISSANCE MINIMA- MODÈLE D'INJECLE kW TEUR 1/100 mm Triple couronne 3,8 1,4 146 Semi-rapide 1,9 0,75 96x Auxiliaire 1,0 0,45 70 9.
FRANÇAIS 19 10.2 Économies d'énergie • Avant utilisation, assurez-vous que les brûleurs et les supports de casseroles sont correctement assemblés. • Utilisez uniquement des récipients dont le diamètre correspond aux dimensions des brûleurs. • Mettez le récipient au centre du brûleur. • Lorsque vous chauffez de l'eau, n'utilisez que la quantité d'eau dont vous avez besoin. • Si possible, couvrez toujours les récipients avec un couvercle pendant la cuisson.
www.aeg.com INDICE 1. INFORMAZIONI DI SICUREZZA...............................................................................21 2. ISTRUZIONI DI SICUREZZA...................................................................................... 23 3. DESCRIZIONE DEL PRODOTTO............................................................................. 26 4. UTILIZZO QUOTIDIANO.......................................................................................... 26 5. CONSIGLI E SUGGERIMENTI UTILI......
ITALIANO 1. 21 INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
www.aeg.com • • • • • • • • • • • bambini al di sotto dei 8 anni se non costantemente supervisionati. Non utilizzare un timer esterno o un sistema di controllo remoto distinto per mettere in funzione l'apparecchiatura. AVVERTENZA: Non lasciare mai il piano di cottura incustodito durante la preparazione di cibi in quanto olio e grassi potrebbero provocare un incendio. Non tentare MAI di spegnere un incendio con dell'acqua; spegnere l'apparecchiatura e coprire le fiamme ad es.
ITALIANO • • 23 isolante onnipolare. È necessario che l’apparecchiatura si scolleghi completamente dalla rete conformemente alle condizioni della categoria III relativa alla sovratensione. Il cavo di terra è escluso. Quando si collega il cavo di alimentazione, assicurarsi che non sia a contatto diretto (ad es. mediante l'impiego di manicotti di isolamento) con parti che possono raggiungere temperature superiori ai 50°C.
www.aeg.com • • • • • • • • • • • • • • • l'apparecchiatura sia scollegata dalla rete elettrica. Verificare che i dati elettrici riportati sulla targhetta dei dati corrispondano a quelli dell'impianto. In caso contrario, contattare un elettricista. Verificare che l'apparecchiatura sia installata correttamente. L'allentamento di un collegamento elettrico o di una spina (ove previsti) può provocare il surriscaldamento del terminale. Utilizzare il cavo di alimentazione appropriato.
ITALIANO • Non mettere in funzione l'apparecchiatura con le mani umide o quando c'è un contatto con l'acqua. • Non utilizzare l'apparecchiatura come superficie di lavoro o come piano di appoggio. • Un alimento immerso nell'olio molto caldo può provocare degli schizzi. AVVERTENZA! Pericolo di incendio ed esplosioni. • Grassi e olio caldi possono rilasciare vapori infiammabili. Mantenere fiamme o oggetti caldi lontani da grassi e olio quando li si utilizza per cucinare.
www.aeg.com • Non pulire i bruciatori in lavastoviglie. 2.6 Smaltimento • Tagliare il cavo elettrico dell'apparecchiatura e smaltirlo. • Appiattire i tubi del gas esterni. 2.7 Assistenza Tecnica AVVERTENZA! Rischio di lesioni o soffocamento. • Rivolgersi all'autorità municipale per informazioni su come smaltire correttamente l'elettrodomestico. • Staccare la spina dall'alimentazione elettrica. • Per riparare l'apparecchiatura contattare il Centro di Assistenza Autorizzato.
ITALIANO 4.1 Panoramica bruciatore 1. Premere la manopola di regolazione e ruotarla in senso antiorario fino alla A B C D A B C D A. B. C. D. 27 Spartifiamma bruciatore Corona bruciatore Candela di accensione Termocoppia 4.2 Accensione del bruciatore Accendere sempre il bruciatore prima di posizionare una pentola. AVVERTENZA! Fare attenzione in fase di utilizzo di fiamme libere all'interno della cucina. Il produttore declina qualsiasi responsabilità in caso di cattivo utilizzo delle fiamme.
www.aeg.com Nel caso in cui il bruciatore si dovesse spegnere, ruotare la manopola di regolazione in posizione di spento per cercare di riaccendere il bruciatore dopo almeno 1 minuto. Il generatore di scintille si avvia in modo automatico all'accensione delle prese, dopo l'installazione o dopo un'interruzione di corrente. È normale. 4.3 Spegnimento del bruciatore Per spegnere la fiamma, ruotare la manopola in posizione di spento .
ITALIANO 29 Bruciatore Diametro delle pentole (mm) Bruciatore Diametro delle pentole (mm) Semirapido (posteriore sinistro) 120 - 240 Semirapido (anteriore sinistro) 120 - 220 Semirapido (posteriore destro) 120 - 240 Ausiliario 80 - 180 6. PULIZIA E CURA AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 6.1 Informazioni generali • Pulire il piano di cottura dopo ogni impiego. • Usare sempre pentole con il fondo pulito.
www.aeg.com • Per pulire gli elementi smaltati, lo spartifiamma e la corona, lavarli con acqua calda saponata e asciugarli attentamente prima di sistemarli nuovamente. componenti ben puliti per evitare difficoltà di accensione e controllare che i fori spartifiamma non siano ostruiti. 6.4 Pulizia della candela Consultare periodicamente il Centro di Assistenza autorizzato locale per verificare le condizioni del tubo della fornitura di gas e del regolatore di pressione, se presente.
ITALIANO sono contenute nel libretto della garanzia. 7.3 Etichette fornite con il sacchetto degli accessori Attaccare le etichette adesive come indicato di seguito: A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A. Attaccarla sul Foglietto di garanzia ed inviare questa parte (ove prevista). B. Attaccarla sul Foglietto di garanzia e conservare questa parte (ove prevista). C. Attaccarla sul libretto di istruzioni. 8.
www.aeg.com Scegliere dei collegamenti fissi o usare un tubo flessibile in acciaio inossidabile conforme alle disposizioni vigenti. Se si utilizzano tubi in metallo flessibili, fare attenzione che non entrino in contatto con parti mobili o non siano schiacciati. Ulteriore attenzione è richiesta qualora al piano di cottura fosse abbinato il forno. Accertarsi che la pressione del gas di alimentazione dell'apparecchiatura sia conforme ai valori consigliati.
ITALIANO AVVERTENZA! Accertarsi che la fiamma non si spenga quando si gira rapidamente la manopola dalla posizione massima a quella minima. 8.5 Collegamento elettrico • Verificare che la tensione nominale e il tipo di corrente della rete di distribuzione corrispondano ai valori indicati sulla targhetta dei dati dell'apparecchiatura. • L'apparecchiatura è provvista di cavo di collegamento alla rete. Deve essere dotato di una spina in grado di supportare il carico indicato sulla targhetta dei dati.
www.aeg.com 8.8 Installazione del piano di cottura sotto la cappa da cucina 400 mm Se si installa il piano di cottura sotto a una cappa da cucina, fare riferimento alle istruzioni per l'installazione della cappa per la distanza minima tra le apparecchiature. 50 mm Qualora l'unità sia installata a 400 mm sopra al piano cottura, ci deve essere una distanza di sicurezza minima di 50 mm a sinistra o destra dell'estremità del piano cottura. 5. 8.
ITALIANO 35 9. DATI TECNICI 9.1 Dimensioni del piano di cottura Larghezza 696 mm Profondità 516 mm 9.2 Diametri bypass BRUCIATORE Ø BYPASS 1/100 mm Tripla Corona 57 Semi rapido 42 Ausiliario 32 9.3 Altri dati tecnici Gas originale: G20 (2H) 20 mbar = 10,5 kW POTENZA TOTALE: Gas sostitutivo: G30 (3+) 28-30 mbar = 763 g/h G31 (3+) 37 mbar = 750 g/h Alimentazione elettrica: 220-240 V ~ 50/60 Hz Categoria apparecchiatura: II2H3+ Collegamento gas: G 1/2" Classe apparecchiatura: 3 9.
www.aeg.com 9.5 Bruciatori a gas per GPL G30/G31 28-30/37 mbar BRUCIATORE POTENZA NORMALE kW POTENZA MINIMA kW SIMBOLO INIETTORE 1/100 mm PORTATA NOMINALE GAS g/h G30 28-30 mbar G31 37 mbar Tripla Corona 3,8 1,4 98 276 271 Semi rapido 1,9 0,75 71 138 136 Ausiliario 1,0 0,45 50 73 71 10. EFFICIENZA ENERGETICA 10.
ITALIANO 37 11. CONSIDERAZIONI SULL'AMBIENTE Riciclare i materiali con il simbolo . Buttare l'imballaggio negli appositi contenitori per il riciclaggio. Aiutare a proteggere l’ambiente e la salute umana e a riciclare rifiuti derivanti da apparecchiature elettriche ed elettroniche. Non smaltire le * apparecchiature che riportano il simbolo insieme ai normali rifiuti domestici. Portare il prodotto al punto di riciclaggio più vicino o contattare il comune di residenza.
www.aeg.
ITALIANO 39
867321933-B-372016 www.aeg.