PT Manual de instruções Placa HG795440XB
www.aeg.com ÍNDICE 1. INFORMAÇÕES DE SEGURANÇA................................................................................3 2. INSTRUÇÕES DE SEGURANÇA.................................................................................... 5 3. DESCRIÇÃO DO PRODUTO..........................................................................................8 4. UTILIZAÇÃO DIÁRIA.......................................................................................................8 5. SUGESTÕES E DICAS.......
PORTUGUÊS 1. 3 INFORMAÇÕES DE SEGURANÇA Leia atentamente as instruções fornecidas antes de instalar e utilizar o aparelho. O fabricante não é responsável por lesões ou danos resultantes de instalação e utilização incorrectas. Guarde sempre as instruções junto do aparelho para futura referência. 1.
www.aeg.com • • • • • • • • • • Deixar cozinhados com gorduras ou óleos na placa sem vigilância pode ser perigoso e resultar em incêndio. Nunca tente extinguir um incêndio com água. Em vez disso, desligue o aparelho e cubra as chamas com uma tampa de tacho ou manta de incêndio. Não coloque objectos sobre as zonas de cozedura. Os objectos metálicos como facas, garfos, colheres e tampas de tacho não devem ser colocados na superfície da placa porque podem ficar quentes.
PORTUGUÊS 5 2. INSTRUÇÕES DE SEGURANÇA Este aparelho é adequado para os seguintes mercados: PT 2.1 Instalação ADVERTÊNCIA! A instalação deste aparelho tem de ser efectuada por uma pessoa qualificada. • Remova toda a embalagem. • Não instale nem utilize o aparelho se ele estiver danificado. • Cumpra as instruções de instalação fornecidas com o aparelho. • Respeite as distâncias mínimas relativamente a outros aparelhos e unidades.
www.aeg.com • Não puxe o cabo de alimentação para desligar o aparelho. Puxe sempre a ficha de alimentação. • Utilize apenas dispositivos de isolamento correctos: disjuntores de protecção, fusíveis (os fusíveis de rosca devem ser retirados do suporte), diferenciais e contactores. • A instalação eléctrica deve possuir um dispositivo de isolamento que lhe permita desligar o aparelho da corrente eléctrica em todos os pólos.
PORTUGUÊS • Utilize apenas tachos e panelas estáveis, com forma correcta e diâmetro superior às dimensões dos queimadores. • Certifique-se de que o tacho fica centrado sobre o queimador. • Certifique-se de que a chama não se apaga quando roda rapidamente o botão da posição do máximo para a posição do mínimo. • Utilize apenas os acessórios fornecidos com o aparelho. • Não instale um difusor de chama sobre um queimador. • A utilização de um aparelho de cozedura a gás resulta na produção de calor e humidade.
www.aeg.com 3. DESCRIÇÃO DO PRODUTO 3.1 Disposição da placa 1 2 1 2 3 4 Queimador semi-rápido Queimador de coroa tripla Queimador auxiliar Botões de comando 3 4 3.2 Botão de comando Símbolo Símbolo Descrição Descrição fornecimento de gás mínimo sem fornecimento de gás/ posição de desligado posição de ignição/fornecimento de gás máximo 4. UTILIZAÇÃO DIÁRIA A) Tampa e coroa do queimador B) Termopar C) Vela de ignição ADVERTÊNCIA! Consulte os capítulos relativos à segurança. 4.
PORTUGUÊS 4.2 Ignição do queimador Acenda sempre o queimador antes de colocar o tacho. ADVERTÊNCIA! Tenha muito cuidado quando utilizar uma chama aberta no ambiente da cozinha. O fabricante declina qualquer responsabilidade em caso de utilização incorrecta da chama. 1. Pressione o botão de comando e rode-o para a esquerda até à posição do fornecimento de gás máximo ( ). 2. Mantenha o botão de comando pressionado durante não mais de 10 segundos. Isso permitirá que o termopar aqueça.
www.aeg.com 5.1 Tachos e panelas CUIDADO! Certifique-se de que os tachos e panelas ficam centrados no queimador, para maximizar a estabilidade e minimizar o consumo de gás. CUIDADO! Não utilize panelas de ferro fundido, panelas de pedra, panelas de barro ou placas de grelhador ou tostador. ADVERTÊNCIA! Não coloque a mesma panela sobre dois queimadores. ADVERTÊNCIA! Não coloque tachos instáveis ou danificados no queimador, para evitar derrames de líquidos e ferimentos.
PORTUGUÊS 6.2 Suportes para panelas Os suportes para panelas não podem ser lavados na máquina de lavar loiça. É necessário lavá-los à mão. 1. Retire os suportes para panelas para facilitar a limpeza da placa. Tenha muito cuidado quando voltar a colocar os suportes para panelas, para evitar danos na superfície da placa. 2. Quando lavar os suportes para panelas à mão, tenha cuidado quando os secar porque o revestimento de esmalte pode ter extremidades pouco polidas.
www.aeg.com Problema Causa possível Solução O disjuntor está desligado. Certifique-se de que o disjuntor é a causa da anomalia. Se o disjuntor disparar diversas vezes, contacte um electricista qualificado. A tampa e a coroa do queimador não estão bem colocadas. Coloque a tampa e a coroa do queimador nas posições correctas. A chama apaga-se imediata- O termopar não está sufimente após a ignição. cientemente quente. Após acender a chama, mantenha o botão pressionado durante 10 segundos ou menos.
PORTUGUÊS 13 7.3 Etiquetas fornecidas no saco de acessórios Cole as etiquetas adesivas como indicado em baixo: A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A) Cole no Cartão de Garantia e envie esta parte (se aplicável). B) Cole no Cartão de Garantia e guarde esta parte (se aplicável). C) Cole no manual de instruções. 8. INSTALAÇÃO ADVERTÊNCIA! Consulte os capítulos relativos à segurança. 8.
www.aeg.com Certifique-se de que a pressão do fornecimento de gás ao aparelho cumpre os valores recomendados. A ligação ajustável é fixada no suporte global através de uma porca roscada G 1/2". Aparafuse as peças sem força excessiva, ajuste a ligação na direcção necessária e aperte tudo. • o prazo de validade não foi ultrapassado. Caso detecte alguma anomalia, não repare o tubo e substitua-o.
PORTUGUÊS 15 • Não permita que alguma parte do cabo de alimentação atinja uma temperatura superior a 90 °C. A 5. Se fizer uma alteração: • de gás natural G20 a 20 mbar para gás líquido, aperte totalmente o parafuso de bypass. • de gás líquido para gás natural G20 a 20 mbar, desaperte o parafuso de bypass cerca de 1/4 de volta (1/2 volta no caso do queimador com coroa tripla).
www.aeg.com um acesso fácil no caso de ser necessária a intervenção da assistência técnica. Móvel de cozinha com porta A 30 mm A 60 mm min 20 mm (max 150 mm) B B A) vedante fornecido B) suportes fornecidos CUIDADO! Instale o aparelho apenas numa bancada que tenha a superfície plana. 8.
PORTUGUÊS Categoria do aparelho: II2H3+ Ligação do gás: G 1/2" Classe do aparelho: 3 17 9.4 Queimadores de gás para GÁS NATURAL G20 20 mbar QUEIMADOR POTÊNCIA NORMAL kW POTÊNCIA MÍNIMA kW DIÂMETRO DOS INJECTORES 1/100 mm Coroa tripla 3,8 1,4 146 Semi-rápido 1,9 0,45 96 Auxiliar 1,0 0,33 70 9.
www.aeg.com Eficiência energética da placa a gás (EE gas hob) 58.8% EN 30-2-1: Aparelho domésticos para cozinhar com gás - Parte 2-1: Utilização racional da energia - Geral 10.2 Poupança de energia • Antes de utilizar, certifique-se de que os queimadores e os suportes para panelas estão bem instalados. • Utilize tachos com diâmetro adequado às dimensões dos queimadores. • Centre o tacho no queimador. • Quando aquecer água, utilize apenas a quantidade necessária.
PORTUGUÊS 19
867305437-B-082015 www.aeg.