HG795840NB USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................5 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION.........................................................................................12 5. DAILY USE..
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • This appliance can be used by children aged 8 years and above and by persons with reduced capabilities provided that they have been given instruction and/or supervision regarding the safe use of the appliance and understand the potential hazards involved. Do not let children play with the appliance.
www.aeg.com • • • • • • • • • WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.
ENGLISH 5 2. SAFETY INSTRUCTIONS This appliance is suitable for the following markets: GB 2.1 Installation WARNING! Only a qualified person must install this appliance. Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible. • Remove all the packaging. • Do not install or use a damaged appliance. • Follow the installation instruction supplied with the appliance.
www.aeg.com • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
ENGLISH • • • • • • • the maximum to the minimum position. Use only the accessories supplied with the appliance. Do not install a flame diffuser on the burner. The use of a gas cooking appliance results in the production of heat and moisture. Provide good ventilation in the room where the appliance is installed.
www.aeg.com B.S. 5440, Par. 2 and B.S. 6891 Current Editions. The hob should not be installed in a bed sitting room with a volume of less than 20 m³. If it is installed in a room of volume less than 5 m³ an air vent of effective area of 100 cm² is required. If it is installed in a room of volume between 5 m³ and 10 m³ an air vent of effective area of 50 cm² is required, while if the volume exceeds 11 m³ no air vent is required.
ENGLISH CAUTION! Make sure that the gas supply pressure of the appliance obeys the recommended values. Rigid connection: Carry out connection by using metal rigid pipes (copper with mechanical end). 3.4 Electrical connection • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug (if applicable). • The appliance must not be connected with an extension cable, an adapter or a multiple socket. There is a risk of fire.
www.aeg.com 3.5 Replacement of the connection cable 3.6 Assembly 1. The replacement of electric cable must be carried out exclusively by the service force centre or by personnel with similar competencies, in accordance with the current regulations. To replace the connection cable use only H05SS-F T180 or equivalent type. Make sure that the cable section is applicable to the voltage load and the working temperature.
ENGLISH 5. 11 The burner flame may be extinguished by an air flow, if the removable panel is not installed. The air flow may occur when you open or close the cabinet door or drawer. Kitchen unit with door or drawer 30 mm 6. min 20 mm (max 150 mm) A A 60 mm B A. Removable panel B. Space for connections B 7. Kitchen unit with drawer A) supplied seal B) assembled bracket 30 mm min 20 mm (max 150 mm) A 60 mm B CAUTION! Install the appliance only on a worktop with flat surface. 3.
www.aeg.com 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 1 1 2 3 4 Semi-rapid burner Rapid burner Auxiliary burner Control knobs 2 3 4 4.2 Control knob Symbol Symbol Description no gas supply / off position Description ignition position / maximum gas supply minimum gas supply 5. DAILY USE 5.2 Ignition of the burner WARNING! Refer to Safety chapters. Always light the burner before you put on the cookware. 5.
ENGLISH lets the thermocouple warm up. If not, the gas supply is interrupted. 3. Adjust the flame after it is regular. If after some tries the burner does not light, check if the flame spreader is in correct position. WARNING! Do not keep the control knob pushed for more than 15 seconds. If the burner does not light after 15 seconds, release the control knob, turn it into off position and try to light the burner again after minimum 1 minute.
www.aeg.com CAUTION! Make sure that the pots are placed centrally on the burner in order to get maximum stability and to get lower gas consumption. CAUTION! Liquids spilt during cooking can cause the glass to break. Burner Diameter of cookware (mm) Rapid 180 - 260 Semi-rapid 140 - 220 Auxiliary 100 - 160 6.2 Diameters of cookware Use cookware with diameters applicable to the size of burners. 7. CARE AND CLEANING WARNING! Refer to Safety chapters. 7.
ENGLISH 15 7.5 Cleaning the flame spreader You can wash the flame spreaders in a dishwasher. WARNING! Let the flame spreaders cool down before you clean them. Light stains: Wash the flame spreader with warm water and soap and dry it with a soft cloth. Medium stains: Use the dishwasher. Place the flame spreader on the bottom rack in a flat position, with the top side up. Heavy stains: Clean the flame spreader with warm water and soap, then wash it in the dishwasher.
www.aeg.com 8.1 What to do if... Problem Possible cause Remedy There is no spark when you The hob is not connected to try to activate the spark gen- an electrical supply or it is erator. connected incorrectly. Check if the hob is correctly connected to the electrical supply. The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Flame spreader is placed incorrectly. Place the flame spreader correctly.
ENGLISH 8.3 Labels supplied with the accessories bag Stick the adhesive labels as indicated below: A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A. Stick it on Guarantee Card and send this part (if applicable). B. Stick it on Guarantee Card and keep this part (if applicable). C. Stick it on instruction booklet. 9. TECHNICAL DATA 9.1 Hob dimensions Width 590 mm Depth 520 mm 9.
www.aeg.com Electric supply: 220-240 V ~ 50/60 Hz 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse Appliance category: I2H Gas connection: R 1/2" Appliance class: 3 9.4 Gas burners for NATURAL GAS G20 20 mbar BURNER NORMAL POWER kW MINIMUM POWER kW INJECTOR MARK Rapid 2,9 1,2 120B Semi-rapid 2,0 0,75 102 Auxiliary 1,0 0,5 73F 10. ENERGY EFFICIENCY 10.
ENGLISH 19 11. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of * appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
867321980-E-422018 www.aeg.