HGB95320SM USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION.........................................................................................11 5. DAILY USE..
ENGLISH 3 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • • or connected to a circuit that is regularly switched on and off by a utility. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use the appliance before installing it in the built-in structure.
ENGLISH 2.1 Installation WARNING! Only a qualified person must install this appliance. WARNING! Risk of injury or damage to the appliance. • Remove all the packaging. • Do not install or use a damaged appliance. • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
www.aeg.com the gas and gas pressure) and the adjustment of the appliance are compatible. • Make sure that there is air circulation around the appliance. • The information about the gas supply is on the rating plate. • This appliance is not connected to a device, which evacuates the products of combustion. Make sure to connect the appliance according to current installation regulations. Pay attention to requirements regarding adequate ventilation. 2.
ENGLISH • Discoloration of the enamel or stainless steel has no effect on the performance of the appliance. 2.5 Care and cleaning WARNING! Do not remove the buttons, knobs or gaskets from the control panel. Water may get inside the appliance and cause damage. • Clean the appliance regularly to prevent the deterioration of the surface material. • Deactivate the appliance and let it cool down before you clean it. • Disconnect the appliance from the electrical supply before maintenance.
www.aeg.com WARNING! When installation is complete, make sure that the seal of each pipe fitting is correct. Use a soapy solution, not a flame! A B C A. End of shaft B. Washer supplied with the appliance C. Elbow supplied with the appliance WARNING! It is important to install the elbow correctly. Make sure that the shoulder is on the end of the thread. Then install it on the hob connecting pipe. Incorrect assembly may cause a gas leakage. Liquid gas Use the rubber pipe holder for liquid gas.
ENGLISH A 5. If you change: • from natural gas G20 20 mbar to liquid gas, fully tighten the bypass screw in. • from liquid gas to natural gas G20 20 mbar, undo the bypass screw approximately 1/4 of a turn (1/2 of a turn for Multi Crown burner). 6. Reassemble the gasket and the knob. 9 • Make sure that there is an access to the mains plug after the installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
www.aeg.com 7. 2. 40 mm 3. 30 mm min. 300 mm min. 650 mm 20 mm min. 55 mm 30 mm 480 02 mm + 830 -02 mm 8. 4. 5. CAUTION! Install the appliance only on a worktop with flat surface. 3.8 Possibilities for insertion The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary. Kitchen unit with door 6.
ENGLISH A B min 30 mm A. Removable panel B. Space for connections Kitchen unit with oven The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven from the unit. min 5 mm (max 150 mm) 60 mm 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 2 1 3 1 2 3 4 5 Semi-rapid burner Multi Crown burner Auxiliary burner Rapid burner Control knobs 4 5 4.2 Control knob Symbol Description no gas supply / off position 5.
www.aeg.com 5.1 Burner overview 1. Push the control knob down and turn it counterclockwise to the maximum $ % & ' $ % & ' A. B. C. D. Burner cap Burner crown Ignition candle Thermocouple 5.2 Ignition of the burner Always light the burner before you put on the cookware. WARNING! Be very careful when you use open fire in the kitchen environment. The manufacturer declines any responsibility in case of the flame misuse. gas supply position ( ). 2.
ENGLISH 5.3 Turning the burner off WARNING! Always turn the flame down or switch it off before you remove the pans from the burner. To put the flame out, turn the knob to the off position 13 . 6. HINTS AND TIPS CAUTION! Make sure that the pots are placed centrally on the burner in order to get the maximum stability and a lower gas consumption. WARNING! Refer to Safety chapters. 6.1 Cookware CAUTION! Do not use cast iron pans, clay or earthenware pots, grill or toaster plates.
www.aeg.com • To remove burnt food, fat and stubborn stains let them soak in a small amount of mild detergent for a few minutes before cleaning. • Use cleaning products designed specifically for cleaning stainless steel in order to protect the steel surfaces. • Do not use cleaning products containing corrosive chemicals such as chlorides, do not clean the surface with disinfectants, stain or rust removers and immersion cleaners. 7.
ENGLISH 15 8. TROUBLESHOOTING WARNING! Refer to Safety chapters. 8.1 What to do if... Problem Possible cause Remedy There is no spark when you The hob is not connected to try to activate the spark gen- an electrical supply or it is erator. connected incorrectly. Check if the hob is correctly connected to the electrical supply. The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
www.aeg.com 8.3 Labels supplied with the accessories bag Stick the adhesive labels as indicated below: A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A. Stick it on Guarantee Card and send this part (if applicable). B. Stick it on Guarantee Card and keep this part (if applicable). C. Stick it on instruction booklet. 9. TECHNICAL DATA 9.1 Hob dimensions Width 857 mm Depth 520 mm 9.
ENGLISH 17 9.3 Other technical data Gas original: G30/G31 (3B/P) 30/30 mbar 832 g/h TOTAL POWER: Gas replacement: G20 (2H) 20 mbar 11,65 kW Electric supply: 220-240 V ~ 50-60 Hz Appliance category: II2H3B/P Gas connection: R 1/2" Appliance class: 3 9.
www.aeg.
ENGLISH 19
867356357-B-212019 www.aeg.