HGB95520YM USER MANUAL FR Notice d'utilisation Table de cuisson
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................2 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. INSTALLATION............................................................................................................8 4. DESCRIPTION DE L'APPAREIL.................................................................................12 5.
FRANÇAIS 3 utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • • AVERTISSEMENT : Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge.
FRANÇAIS • 5 parties pouvant atteindre des températures supérieures de 50 °C à la température ambiante. AVERTISSEMENT : Utilisez uniquement les dispositifs de protection pour table de cuisson conçus ou indiqués comme adaptés par le fabricant de l'appareil de cuisson dans les instructions d'utilisation, ou les dispositifs de protection pour table de cuisson intégrés à l'appareil. L'utilisation de dispositifs de protection non adaptés peut entraîner des accidents. 2.
www.aeg.com • Utilisez un collier anti-traction sur le câble. • Assurez-vous que le câble d'alimentation ou la fiche (si présente) n'entrent pas en contact avec les surfaces brûlantes de l'appareil ou les récipients brûlants lorsque vous branchez l'appareil à des prises électriques situées à proximité. • L’appareil ne doit pas être raccordé à l’aide d'une prise multiple ou d'un prolongateur. • Veillez à ne pas endommager la fiche secteur (si présente) ni le câble d'alimentation.
FRANÇAIS graisses et de l'huile lorsque vous vous en servez pour cuisiner. • Les vapeurs dégagées par l'huile très chaude peuvent provoquer une combustion spontanée. • L'huile qui a servi contient des restes d'aliments pouvant provoquer un incendie à température plus faible que l'huile n'ayant jamais servi. • Ne placez pas de produits inflammables ou d'éléments imbibés de produits inflammables à l'intérieur ou à proximité de l'appareil, ni sur celui-ci. AVERTISSEMENT! Risque d'endommagement de l'appareil.
www.aeg.com 2.7 Mise au rebut AVERTISSEMENT! Risque de blessure ou d'asphyxie. • Contactez votre service municipal pour obtenir des informations sur la marche à suivre pour mettre l'appareil au rebut. • Débranchez l'appareil de l'alimentation électrique. • Coupez le câble d'alimentation au ras de l'appareil et mettez-le au rebut. • Aplatissez les tuyaux de gaz externes. 3. INSTALLATION AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 3.
FRANÇAIS 9 L'utilisation d'un tuyau flexible s'applique lorsque : • il ne peut pas devenir plus chaud que la température ambiante, à savoir plus de 30 °C ; • il n'est pas plus long que 1 500 mm ; • il ne montre aucun étranglement ; • il n'est soumis à aucune traction ni aucune torsion ; • il n'entre pas en contact avec des bords ni des coins tranchants ; • il peut être facilement contrôlé sur toute sa longueur afin de vérifier son état.
www.aeg.com (risque d'incendie). Assurez-vous que le raccordement à la terre est conforme aux normes et réglementations. • Le câble d'alimentation ne doit pas être exposé à une température supérieure à 90 °C. A 5. Si vous passez : • du gaz naturel G20 20 mbar au gaz liquéfié, serrez entièrement la vis de réglage. • du gaz liquéfié au gaz naturel G20 20 mbar, dévissez la vis de réglage d'environ 1/4 de tour (1/2 tour pour un brûleur à forte chaleur).
FRANÇAIS 11 7. 2. 40 mm 3. 30 mm min. 300 mm min. 650 mm 20 mm min. 55 mm 30 mm 480 02 mm + 830 -02 mm 8. 4. 5. ATTENTION! Installez l'appareil uniquement sur un plan de travail dont la surface est plane. 3.8 Possibilités d'insertion Le panneau installé sous la table de cuisson doit être facile à retirer et facilement accessible au cas où une intervention technique serait nécessaire. 6.
www.aeg.com A B B. Espace pour les branchements min 30 mm min 5 mm (max 150 mm) 60 mm Élément de cuisine avec four Les branchements électriques de la table de cuisson et du four doivent être installés séparément pour des raisons de sécurité et pour permettre un retrait facile du four de l'ensemble. A. Panneau amovible 4. DESCRIPTION DE L'APPAREIL 4.
FRANÇAIS 5.1 Vue d'ensemble des brûleurs Sinon, l'alimentation en gaz est interrompue. 3. Une fois que la flamme brûle régulièrement, réglez son débit. $ % & ' A B D A. B. C. D. C Chapeau du brûleur Couronne du brûleur Bougie d'allumage Thermocouple 5.2 Allumage du brûleur Allumez toujours le brûleur avant de poser un récipient dessus. AVERTISSEMENT! Faites très attention lorsque vous utilisez une flamme nue dans une cuisine.
www.aeg.com Le générateur d'étincelles peut s'activer automatiquement lorsque vous allumez l'alimentation secteur, après l'installation ou après une coupure de courant. C'est normal. table de cuisson. Utilisez le support pour wok uniquement sur le brûleur à haute puissance. Lorsque vous installez le support pour wok, assurez-vous que les encoches du cadre s'ajustent bien sur les barres des supports de casserole. La table de cuisson est fournie avec les valves de distribution progressive.
FRANÇAIS ATTENTION! Assurez-vous que les récipients de cuisson sont bien centrés sur le brûleur afin de garantir leur stabilité et de réduire la consommation de gaz. 6.2 Économies d'énergie 15 Brûleur Diamètre du récipient (mm) Forte puissance 240 - 300 Rapide 180 - 260 Semi-rapide 120 - 220 Auxiliaire 80 - 180 • Si possible, couvrez toujours les récipients avec un couvercle pendant la cuisson.
www.aeg.com 2. Lorsque vous lavez les supports de casserole à la main, faites bien attention lorsque vous les essuyez, car le revêtement en émail peut présenter des bords coupants. Si nécessaire, retirez les taches tenaces à l'aide d'une pâte nettoyante. 3. Après avoir lavé les supports de casserole, veillez à les remettre correctement en place. 4. Pour que le brûleur fonctionne correctement, assurez-vous que les bras des supports de casserole sont alignés avec le centre du brûleur.
FRANÇAIS 17 8.1 Que faire, quand... Problème Cause probable Solution Aucune étincelle ne se produit lorsque vous tentez d'actionner le générateur d'étincelles. La table de cuisson n'est pas connectée à une source d'alimentation électrique, ou le branchement est incorrect. Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique. Le fusible a disjoncté. Vérifiez que le fusible est bien la cause de l'anomalie.
www.aeg.com 8.3 Étiquettes fournies dans le sachet des accessoires Collez les étiquettes adhésives comme indiqué ci-dessous : A B MOD. MOD. PROD.NO. PROD.NO. SER.NO SER.NO DATA DATA C MOD. PROD.NO. SER.NO. 0049 TYPE IP20 03 IT MADE IN ITALY A. Collez-la sur la carte de garantie et envoyez cette partie (le cas échéant). B. Collez-la sur la carte de garantie et conservez cette partie (le cas échéant). C. Collez-la sur la notice d'utilisation. 9. CARACTÉRISTIQUES TECHNIQUES 9.
FRANÇAIS 9.3 Autres caractéristiques techniques Gaz d'origiPUISSANCE TO- ne : TALE : Gaz de remplacement : G30/G31 (3B/P) 30/30 mbar 945 g/h G20 (2H) 20 mbar 13,85 kW Alimentation électrique : 220-240 V ~ 50-60 Hz Catégorie de l'appareil : II2H3B/P Raccordement au gaz : R 1/2" Classe de l'appareil : 3 9.
www.aeg.com électroniques. Ne jetez pas les appareils portant le symbole avec les ordures ménagères. Emmenez un tel produit * dans votre centre local de recyclage ou contactez vos services municipaux.
FRANÇAIS 21
www.aeg.
FRANÇAIS 23
867356356-A-222019 www.aeg.