Operation Manual

ManualsBrandsAEG ManualsSawhk 46 n

ENGLISH

HK 46 N

This electronic circular saw can cut lengthways and mitre accurately in wood,

plastic, and aluminium.

Connect only to a single-phase AC current supply and only to the mains voltage

specified on the rating plate. Connection to sockets without earth protection is

possible as the appliance features protective insulation to DIN 57 740/ VDE 0740

and CEE 20. Radio suppression complies with the European standard EN 55014.

When fitting the plug, make sure that the brown (live) wire of this appliance is

connected to the plug terminal marked L or coloured red, and the blue (neutral) wire

of this appliance is connected to the plug terminal marked N or coloured black.

Under no circumstances must the wires of this appliance be connected to the earth

terminal of the plug marked either E, with the earth symbol or coloured green or

green/yellow.

Always disconnect the plug from the socket before carrying out any work on the

machine.

1. Swing the movable protective cover back

and hold it steady. Hold the work spindle

still by means of a wooden wedge

between the saw blade teeth and the

guide plate.

2. Unscrew the tension screw  with the

hexagonal spanner. Remove the

washer  and the spring washer .

3. Fit the new saw blade by following the

above steps in the reverse order.

The arrow on the saw-blade must point in the same direction as the direction of

rotation arrow.

Brief description

Modifications: Text, diagrams and data are correct at the time of

printing. In the interest of continuous improvement of our

products, technical specifications are subject to alteration without

prior notice.

Sawdust outlet

Cutting angle adjustment with cutting

angle scale.

Protective swing cover to protect the user

against injuries. When the machine is

applied to the working material the cover

swings back automatically.

Parallel guide with millimeter scale.

On-/off switch

Cutting depth adjustment with millimeter

scale.

Guide plate

Switch lock – prevents the machine from

being switched on accidentally.

Use

Mains

connection

Changing the

saw blade