HK634060XB EN HOB USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 7 8 11 12 12 13 Safety information Installation instructions Product description Operating instructions Helpful hints and tips Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.
Installation instructions 5 • Do not put the aluminium foil on the appliance. WARNING! If there is a crack on the surface, disconnect power supply to prevent the electrical shock. INSTALLATION INSTRUCTIONS Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The rating plate of the appliance is on its lower casing.
Installation instructions • Use a strain relief clamp on cable. • Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection. • Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or higher). Speak your local Service Centre. The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm.
Product description If you use a protection box (the additional accessory), the protective floor directly below the appliance is not necessary. PRODUCT DESCRIPTION General overview 1 2 145 265 mm 170 mm 145 120/210 3 mm mm 5 1 2 3 4 5 mm Cooking zone 1200 W Oval cooking zone 1500/2400 W Cooking zone 1200 W Control panel Double cooking zone 750/2200 W 4 Control panel layout 1 2 11 3 10 4 9 5 6 7 8 Use the sensor fields to operate the appliance.
Operating instructions sensor field function The timer display 5 It shows the time in minutes / 6 It increases or decreases the heat setting It activates and deactivates the outer ring 7 It increases or decreases the time / 8 9 It selects the cooking zone 10 It activates and deactivates the outer ring 11 It activates and deactivates the STOP+GO function Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - The function operates.
Operating instructions • You do not deactivate a cooking zone or change the heat setting. After some time comes on and the appliance deactivates. See the table. The times of Automatic Switch Off Heat setting The cooking zone deactivates after , - 6 hours - - 5 hours 4 hours 1.5 hours The heat setting Touch to increase the heat setting. Touch to decrease the heat setting. The display shows the heat setting. Touch and at the same time to deactivate the cooking zone.
Operating instructions • To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates. • To stop the sound: touch You can use the Timer as a minute minder while the cooking zones do not operate. Touch . Touch or to set the time.
Helpful hints and tips 11 HELPFUL HINTS AND TIPS Cookware • The bottom of the cookware must be as thick and flat as possible. • Cookware made of enamelled steel and with aluminium or copper bottoms can cause the colour change on the glass-ceramic surface. Energy saving • • • • If it is possible, always put the lids on the cookware. Put cookware on a cooking zone before you start it. Stop the cooking zones before the end of the cooking time to use residual heat.
Care and cleaning Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. CARE AND CLEANING Clean the appliance after each use. Always use cookware with clean bottom. WARNING! The sharp objects and abrasive cleaning agents can cause damage to the appliance.
Environment concerns Problem 13 Possible cause and remedy The residual heat indicator does The cooking zone is not hot because it operated only for a short not comes on. time. If the cooking zone should be hot, speak to the service centre. The Automatic Heat Up function does not operate. • There is still residual heat on the cooking zone. Let the cooking zone become sufficiently cool. • The highest heat setting is set. The highest heat setting has the same power as the Automatic Heat Up function.
www.aeg-electrolux.
