EN FR DE User Manual Hob Notice d'utilisation Table de cuisson Benutzerinformation Kochfeld 2 21 43 HK6532H2XB
www.aeg.com CONTENTS 1. SAFETY INFORMATION...........................................................................................3 2. SAFETY INSTRUCTIONS.......................................................................................... 4 3. PRODUCT DESCRIPTION........................................................................................ 6 4. DAILY USE..................................................................................................................8 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • • • Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector. If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.
ENGLISH • Make sure that a shock protection is installed. • Use the strain relief clamp on the cable. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
www.aeg.com • Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. • This appliance is for cooking purposes only.
ENGLISH Sensor Function field Comment 1 ON / OFF 2 Lock / The Child Safety De- To lock / unlock the control panel. vice 3 STOP+GO To activate and deactivate the function. - Heat setting display To show the heat setting. - Timer indicators of cooking To show for which zone you set the time. zones - Timer display To show the time in minutes. Hob²Hood To activate and deactivate the manual mode of the function. - To select the cooking zone. - To increase or decrease the time.
www.aeg.com 3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 4. DAILY USE WARNING! Refer to Safety chapters. 4.1 Activating and deactivating Touch for 1 second to activate or deactivate the hob. 4.
ENGLISH To deactivate the function: change the heat setting. To change the time: set the cooking 4.5 Power function To deactivate the function: set the This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting. Refer to “Technical information” chapter. zone with . Touch or 9 . and touch .
www.aeg.com comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you The function has no effect on the operation of the cooking zones. deactivate the hob with operates again. 4.8 STOP+GO This function sets all cooking zones that operate to the lowest heat setting. the function When the function operates, you cannot change the heat setting. 4.11 OffSound Control (Deactivation and activation of the sounds) The function does not stop the timer functions.
ENGLISH Automatic light 4.13 Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to hood user manual.
www.aeg.com you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed 1 touch . To activate automatic operation of the function, deactivate the hob and activate it again. Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6.
ENGLISH consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. Heat setting 13 The data in the table is for guidance only. Use to: Time (min) Hints Keep cooked food warm. as necessary Put a lid on the cookware. 1-3 Hollandaise sauce, melt: butter, chocolate, gelatine. 5 - 25 Mix from time to time. 1-3 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.
www.aeg.com Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol . It may happen that other remote controlled appliances may block the signal. To avoid it do not operate the remote of the appliance and the hob at the same time. 6. CARE AND CLEANING WARNING! Refer to Safety chapters. 6.1 General information • Clean the hob after each use.
ENGLISH 15 7.1 What to do if... Problem Possible cause You cannot activate or oper- The hob is not connected to ate the hob. an electrical supply or it is connected incorrectly. The fuse is released. Remedy Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician. Activate the hob again and set the heat setting in less than 10 seconds.
www.aeg.com Problem Possible cause The sensor fields become hot. The cookware is too large or Put large cookware on the you put it too near to the rear zones if possible. controls. There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals. Refer to "Daily use" chapter. comes on. Automatic Switch Off operates. Deactivate the hob and activate it again. comes on. The Child Safety Device or the Lock function operates.
ENGLISH 7.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass 17 surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period.
www.aeg.com min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm min 30 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min. 55mm 490+1mm 560+1mm min. 12 mm min.
ENGLISH 8.5 Protection box 19 If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. 9. TECHNICAL INFORMATION 9.1 Rating plate Modell HK6532H2XB Typ 58 GAD DB AU Induction 7.4 kW Ser.Nr. .................
www.aeg.com 10. ENERGY EFFICIENCY 10.1 Product information according to EU 66/2014 Model identification HK6532H2XB Type of hob Built-In Hob Number of cooking zones 3 Heating technology Induction Diameter of circular cooking zones (Ø) Left front Left rear Right rear 21.0 cm 14.5 cm 28.0 cm Energy consumption per cooking zone (ECelectric cooking) Left front Left rear Right rear 167.2 Wh / kg 178.1 Wh / kg 171.
FRANÇAIS 21 TABLE DES MATIÈRES 1. CONSIGNES DE SÉCURITÉ................................................................................... 22 2. INSTRUCTIONS DE SÉCURITÉ.............................................................................. 23 3. DESCRIPTION DE L'APPAREIL.............................................................................. 26 4. UTILISATION QUOTIDIENNE................................................................................28 5. CONSEILS.............................
1. www.aeg.com CONSIGNES DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.
FRANÇAIS • • • • • • • • 23 Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez jamais d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge. N'entreposez rien sur les surfaces de cuisson.
www.aeg.com panneau de séparation ignifuge sous l'appareil pour en bloquer l'accès. • Assurez-vous de laisser un espace de ventilation de 2 mm entre le plan de travail et l'avant de l'unité qui se trouve dessous. La garantie ne couvre pas les dommages causés par l'absence d'un espace de ventilation adéquat. 2.2 Branchement électrique AVERTISSEMENT! Risque d'incendie ou d'électrocution. • L'ensemble des branchements électriques doit être effectué par un technicien qualifié.
FRANÇAIS • N'utilisez jamais cet appareil avec les mains mouillées ou lorsqu'il est en contact avec de l'eau. • N'utilisez jamais l'appareil comme plan de travail ou comme plan de stockage. • Si la surface de l'appareil présente des fêlures, débranchez immédiatement l'appareil pour éviter tout risque d'électrocution. • Les porteurs de pacemakers doivent rester à une distance minimale de 30 cm des zones de cuisson à induction lorsque l'appareil est en cours de fonctionnement.
www.aeg.com 3. DESCRIPTION DE L'APPAREIL 3.1 Description de la table de cuisson 1 1 1 Zone de cuisson à induction 2 Panneau de commande 145 mm 180/280 mm 210 mm 1 2 3.2 Description du bandeau de commande 1 2 3 4 11 5 6 10 9 7 8 Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. Touche sensitive Fonction Description 1 MARCHE/ARRÊT Pour allumer et éteindre la table de cuisson.
FRANÇAIS Touche sensitive 7 8 / 9 10 11 - Fonction Description Hob²Hood Pour activer et désactiver le mode manuel de la fonction. - Pour choisir la zone de cuisson. - Pour augmenter ou diminuer la durée. Fonction Booster Pour activer et désactiver la fonction. Bandeau de sélection Pour sélectionner un niveau de cuisson. 27 3.3 Indicateurs de niveau de cuisson Affichage Description La zone de cuisson est désactivée. La zone de cuisson est activée. - La fonction STOP+GO est activée.
www.aeg.com 3.4 OptiHeat Control (Voyant de chaleur résiduelle à trois niveaux) AVERTISSEMENT! Les zones de cuisson à induction génèrent la chaleur nécessaire directement sur le fond des récipients de cuisson. La vitrocéramique est chauffée par la chaleur des récipients. / / Il y a risque de brûlures par la chaleur résiduelle. Les voyants indiquent le niveau de chaleur résiduelle. 4. UTILISATION QUOTIDIENNE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 4.
FRANÇAIS un certain temps puis redescend au niveau sélectionné. Pour activer la fonction, la zone de cuisson doit être froide Pour activer la fonction pour une zone ( de cuisson : appuyez sur s'allume). Réglez immédiatement le niveau de cuisson souhaité. Au bout de 3 secondes, s'allume. Pour désactiver la fonction : modifiez le niveau de cuisson. 4.5 Fonction Booster Cette fonction vous permet d'augmenter la puissance des zones de cuisson à induction.
www.aeg.com Pour activer la fonction : appuyez sur la Pour désactiver la fonction : appuyez touche du minuteur. s'allume. Lorsque le voyant de la zone de cuisson clignote lentement, le minuteur démarre. sur . Le niveau de cuisson précédent s'allume. L'affichage indique, en alternance, le nombre de minutes écoulées. et Pour contrôler la durée de fonctionnement de la zone de cuisson sélectionnée : sélectionnez la zone de cuisson à l'aide de . Le voyant de la zone de cuisson clignote rapidement.
FRANÇAIS 31 utiliser la table de cuisson. Lorsque vous éteignez la table de cuisson avec fonction est de nouveau activée. , la 4.11 OffSound Control (Désactivation et activation des signaux sonores) Éteignez la table de cuisson. Appuyez sur pendant 3 secondes. L'affichage s'allume, puis s'éteint. Appuyez sur pendant 3 secondes. ou s'allume.
www.aeg.com Modes automatiques Éclairage automatique Faire Faire bouillir1) frire2) Mode H0 Désac. Désac. Désac. Mode H1 Activé Désac. Désac. Mode H2 3) Vitesse Vitesse du venti- du ventilateur 1 lateur 1 Mode H3 Activé Désac.
FRANÇAIS 33 L'éclairage de la hotte s'éteint 2 minutes après avoir éteint la table de cuisson. 5. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 5.1 Ustensiles de cuisson Sur les zones de cuisson à induction, un champ électromagnétique puissant chauffe les récipients très rapidement. Utilisez des récipients adaptés aux zones de cuisson à induction.
www.aeg.com utilise moins de la moitié de sa puissance. Niveau de cuisson Utilisation : Les données du tableau sont fournies à titre indicatif uniquement. Durée (min) Conseils Conserver les aliments cuits au au bechaud. soin Placez un couvercle sur le récipient. 1-3 Sauce hollandaise, faire fondre : beurre, chocolat, gélatine. 5 - 25 Mélangez de temps en temps. 1-3 Solidifier : omelettes, œufs cocotte. 10 - 40 Couvrez pendant la cuisson.
FRANÇAIS l'image. La hotte de l'illustration n'est donnée qu'à titre d'exemple. 35 Hottes dotées de la fonction Hob²Hood Pour trouver la gamme complète des hottes qui sont dotées de cette fonction, consultez notre site web destiné aux consommateurs. Les hottes AEG qui sont dotées de cette fonction doivent avoir le symbole . Il peut arriver que d'autres appareils contrôlés à distance bloquent le signal.
www.aeg.com 7. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 7.1 En cas d'anomalie de fonctionnement... Problème Cause probable Solution Vous ne pouvez pas mettre en fonctionnement la table de cuisson. La table de cuisson n'est pas connectée à une source d'alimentation électrique ou le branchement est incorrect. Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique.
FRANÇAIS Problème Cause probable Solution La fonction Hob²Hood ne fonctionne pas. Vous avez couvert le bandeau de commande. Retirez l'objet du bandeau de commande. La fonction Démarrage auto- La zone est chaude. matique de la cuisson ne fonctionne pas. Laissez la zone refroidir suffisamment. Le niveau de cuisson le plus élevé est réglé. Le niveau de cuisson maximum offre la même puissance que la fonction. Le niveau de cuisson change. La fonction Gestionnaire de puissance est activée.
www.aeg.com Problème s'allume. Cause probable Solution Une erreur s'est produite sur la table de cuisson parce que le récipient chauffe à vide. Arrêt automatique et la protection contre la surchauffe des zones s'activent. Éteignez la table de cuisson. Enlevez le récipient chaud. Au bout d'environ 30 secondes, remettez la zone en fonctionnement. Si le problème était causé par le récipient, le message d'erreur disparaît. Voyant de chaleur résiduelle peut rester affiché.
FRANÇAIS 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.aeg.com min. 12 mm min. 2 mm 8.5 Enceinte de protection Si vous utilisez une enceinte de protection (accessoire supplémentaire), l'espace de circulation d'air de 2 mm et le fond de protection installé directement sous la table de cuisson ne sont plus nécessaires. L'enceinte de protection n'est pas disponible dans tous les pays. Veuillez contacter votre revendeur local. Vous ne pouvez pas utiliser l'enceinte de protection si vous installez la table de cuisson au-dessus d'un four. 9.
FRANÇAIS 41 9.2 Caractéristiques des zones de cuisson Zone de cuisson Puissance nom- Fonction Boosinale (niveau ter [W] de cuisson max.) [W] Fonction Boos- Diamètre du réter durée maxi- cipient [mm] male [min] Avant gauche 2300 3700 10 180 - 210 Arrière gauche 1400 2500 4 125 - 145 Arrière droite 1800 / 3500 2800 / 5200 5 145 - 180 / 245 280 La puissance des zones de cuisson peut légèrement différer des données du tableau. Elle dépend de la matière et des dimensions du récipient.
www.aeg.com 11. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le électroniques. Ne jetez pas les appareils symbole . Déposez les emballages dans les conteneurs prévus à cet effet. Contribuez à la protection de l'environnement et à votre sécurité, recyclez vos produits électriques et portant le symbole avec les ordures ménagères. Emmenez un tel produit dans votre centre local de recyclage ou contactez vos services municipaux.
DEUTSCH 43 INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN.......................................................................... 44 2. SICHERHEITSANWEISUNGEN.............................................................................. 45 3. GERÄTEBESCHREIBUNG.......................................................................................48 4. TÄGLICHER GEBRAUCH........................................................................................50 5. TIPPS UND HINWEISE........................
1. www.aeg.com SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.
DEUTSCH • • • • • • • • 45 Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. Versuchen Sie nicht einen Brand mit Wasser zu löschen, sondern schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke. Legen Sie keine Gegenstände auf dem Kochfeld ab. Legen Sie keine Metallgegenstände wie Messer, Gabeln, Löffel oder Topfdeckel auf die Oberfläche des Kochfelds, da diese heiß werden können.
www.aeg.com Abstand für die Luftzirkulation vorhanden ist. • Der Boden des Geräts kann heiß werden. Achten Sie darauf eine feuerfeste Trennplatte unter dem Gerät anzubringen, damit der Boden nicht zugänglich ist. • Achten Sie darauf, dass zwischen der Arbeitsplatte und dem Gerät darunter ein Abstand von 2 mm zur Belüftung frei gelassen wird. Schäden, die durch das Fehlen eines Belüftungsabstands entstehen, sind von der Garantie ausgenommen. 2.
DEUTSCH • Die Lüftungsöffnungen dürfen nicht abgedeckt werden. • Lassen Sie das Gerät bei Betrieb nicht unbeaufsichtigt. • Schalten Sie die Kochzonen nach jedem Gebrauch aus. • Verlassen Sie sich nicht auf die Topferkennung. • Legen Sie kein Besteck und keine Topfdeckel auf die Kochzonen. Sie werden heiß. • Bedienen Sie das Gerät nicht mit feuchten oder nassen Händen oder wenn es mit Wasser in Kontakt gekommen ist. • Benutzen Sie das Gerät nicht als Arbeits- oder Abstellfläche.
www.aeg.com Geräts wenden Sie sich an die zuständige kommunale Behörde vor Ort. • Trennen Sie das Gerät von der Stromversorgung. • Schneiden Sie das Netzkabel ab, und entsorgen Sie es. 3. GERÄTEBESCHREIBUNG 3.1 Kochfeldanordnung 1 1 1 Induktionskochzone 2 Bedienfeld 145 mm 180/280 mm 210 mm 1 2 3.2 Bedienfeldanordnung 1 2 3 4 11 5 6 10 9 7 8 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen.
DEUTSCH 6 SenFunktion sorfeld Anmerkung - Timer-Anzeige Zeigt die Zeit in Minuten an. Hob²Hood Ein- und Ausschalten des manuellen Modus der Funktion. - Auswählen der Kochzone. - Erhöhen oder Verringern der Zeit. Power-Funktion Ein- und Ausschalten der Funktion. Einstellskala Einstellen der Kochstufe. 7 8 / 9 10 11 49 - 3.3 Anzeigen der Kochstufen Display Beschreibung Die Kochzone ist ausgeschaltet. Die Kochzone ist eingeschaltet. - Die Funktion STOP+GO ist in Betrieb.
www.aeg.com 4. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. 4.1 Ein- und Ausschalten Berühren Sie 1 Sekunde lang , um das Kochfeld ein- oder auszuschalten. 4.2 Abschaltautomatik Mit dieser Funktion wird das Kochfeld in folgenden Fällen automatisch ausgeschaltet: • Alle Kochzonen sind ausgeschaltet. • Nach dem Einschalten des Kochfelds wird keine Kochstufe gewählt. • Das Bedienfeld ist mehr als 10 Sekunden mit verschütteten Lebensmitteln oder einem Gegenstand bedeckt (Topf, Tuch usw.
DEUTSCH die Induktionskochzone automatisch auf die höchste Kochstufe um. Siehe Kapitel „Technische Daten“. Einschalten der Funktion für eine Kochzone: Berühren Sie . leuchtet. Ausschalten der Funktion: Wählen Sie die Kochzone mit Funktion können Sie auch gleichzeitig berühren. Kurzzeitmesser Mit dieser Funktion stellen Sie ein, wie lange eine Kochzone für einen einzelnen Kochvorgang eingeschaltet bleiben soll. Stellen Sie zuerst die Kochzone und dann die Funktion ein.
www.aeg.com eingestellte Zeit abgelaufen ist, ertönt ein Signalton und 00 blinkt. Ausschalten des Signaltons: Berühren Sie . aus. Zum Ausschalten der Funktion: Sie vier Sekunden. leuchtet. Schalten Sie das Kochfeld mit 4.8 STOP+GO aus. Vorübergehendes Ausschalten der Funktion für einen einzelnen Kochvorgang: Schalten Sie das Kochfeld Mit dieser Funktion werden alle eingeschalteten Kochzonen auf die niedrigste Kochstufe geschaltet.
DEUTSCH • Die Funktion verteilt die Leistung zwischen den Kochzonen. • Die Funktion wird eingeschaltet, wenn die Belastung der Kochzonen 7400 W überschreitet. • Mit dieser Funktion wird die Leistung aller anderen Kochzonen reduziert. • Die Anzeige der reduzierten Kochzone wechselt zwischen zwei Kochstufen. Temperatur des Kochgeschirrs automatisch und passt die Geschwindigkeit des Lüfters an.
www.aeg.com Ändern des Automatikbetriebs 1. Schalten Sie das Gerät aus. 2. Berühren Sie 3 Sekunden lang Das Display wird ein- und ausgeschaltet. . 3. Berühren Sie 3 Sekunden lang . wiederholt, bis 4. Berühren Sie angezeigt wird. 5. Berühren Sie des Timers, um einen automatischen Modus auszuwählen. Schalten Sie den Automatikbetrieb aus, um die Dunstabzugshaube direkt über deren Bedienfeld einzustellen.
DEUTSCH Der Boden des Kochgeschirrs sollte so dick und flach wie möglich sein. Abmessungen des Kochgeschirrs Induktionskochzonen passen sich der Größe des Geschirrbodens bis zu einer bestimmten Grenze automatisch an. Die Kochzoneneffizienz hängt vom Durchmesser des Kochgeschirrs ab. An Kochgeschirr mit einem kleineren Durchmesser als der Mindestdurchmesser gelangt nur ein Teil der von der Kochzone erzeugten Hitze. Siehe Kapitel „Technische Daten“. 5.
www.aeg.com Kochstufe Verwendung: Dauer (Min.) Hinweise 7-9 Dampfgaren von Kartoffeln. 20 - 60 Max. ¼ l Wasser für 750 g Kartoffeln verwenden. 7-9 Kochen größerer Speisemengen, Eintopfgerichte und Suppen. 60 - 150 Bis zu 3 l Flüssigkeit plus Zutaten. 9 - 12 Bei geringer Hitze anbraten: Schnitzel, Cordon bleu, Kotelett, Frikadellen, Bratwürste, Leber, Mehlschwitze, Eier, Pfannkuchen, Donuts. Nach Bedarf Nach der Hälfte der Zeit wenden.
DEUTSCH 57 Dunstabzugshauben, die mit dieser Funktion ausgestattet sind, sind mit dem Symbol gekennzeichnet. 6. REINIGUNG UND PFLEGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 6.1 Allgemeine Informationen • Reinigen Sie das Kochfeld nach jedem Gebrauch. • Achten Sie immer darauf, dass der Boden des Kochgeschirrs sauber ist. • Kratzer oder dunkle Flecken auf der Oberfläche beeinträchtigen die Funktionsfähigkeit des Kochfelds nicht.
www.aeg.com Problem Mögliche Ursache Abhilfe Die Sicherung hat ausgelöst. Vergewissern Sie sich, dass die Sicherung der Grund für die Störung ist. Löst die Sicherung wiederholt aus, wenden Sie sich an eine zugelassene Elektrofachkraft. Schalten Sie das Kochfeld erneut ein und stellen Sie innerhalb von 10 Sekunden die Kochstufe ein. Zwei oder mehr Sensorfelder Berühren Sie nur ein Sensorwurden gleichzeitig berührt. feld. Die Funktion STOP+GO ist in Betrieb. Siehe Kapitel „Täglicher Gebrauch“.
DEUTSCH 59 Problem Mögliche Ursache Abhilfe Die Sensorfelder werden heiß. Das Kochgeschirr ist zu Stellen Sie großes Kochgegroß, oder Sie haben es zu schirr nach Möglichkeit auf nahe an die Bedienelemente die hinteren Kochzonen. gestellt. Es ertönt kein Signalton, wenn Sie die Sensorfelder des Bedienfelds berühren. Der Signalton ist ausgeschal- Schalten Sie den Signalton tet. ein. Siehe Kapitel „Täglicher Gebrauch“. leuchtet auf. Abschaltautomatik ist einge- Schalten Sie das Kochfeld schaltet.
www.aeg.com Problem leuchtet auf. Mögliche Ursache Abhilfe Ein Fehler ist aufgetreten, weil ein Kochgeschirr leer gekocht ist. Abschaltautomatik und der Überhitzungsschutz für die Kochzone ist eingeschaltet. Schalten Sie das Kochfeld aus. Entfernen Sie das heiße Kochgeschirr. Schalten Sie die Kochzone nach etwa 30 Sekunden wieder ein. Wenn das Kochgeschirr das Problem verursacht hat, erlischt die Fehlermeldung. Restwärmeanzeige kann eingeschaltet bleiben.
DEUTSCH 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.aeg.com min. 12 mm min. 2 mm 8.5 Schutzboden Falls Sie einen Schutzboden (optionales Zubehör) verwenden, ist die Einhaltung des vorderen Belüftungsabstands von 2 mm und die Schutzmatte direkt unter dem Gerät nicht nötig. Der Schutzboden ist möglicherweise in einigen Ländern nicht erhältlich. Wenden Sie sich an Ihren Händler vor Ort. Wenn Sie das Kochfeld über einem Backofen einsetzen, können Sie den Schutzboden nicht verwenden. 9. TECHNISCHE DATEN 9.
DEUTSCH 63 9.2 Technische Daten der Kochzonen Kochzone Nennleistung (höchste Kochstufe) [W] Power-Funktion Power-Funktion Durchmesser [W] maximale Eindes Kochgeschaltdauer schirrs [mm] [Min.] Vorne links 2300 3700 10 180 - 210 Hinten links 1400 2500 4 125 - 145 Hinten rechts 1800 / 3500 2800 / 5200 5 145 - 180 / 245 280 Die Leistung der Kochzonen kann geringfügig von den Daten in der Tabelle abweichen. Sie ändert sich je nach Material und Abmessungen des Kochgeschirrs.
www.aeg.com 11. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie * Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
DEUTSCH 65
www.aeg.
DEUTSCH 67
867311367-B-382014 www.aeg.