HK654400XB EN INDUCTION HOB USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 7 8 12 14 15 16 Safety information Installation instructions Product description Operating instructions Helpful hints and tips Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.
Installation instructions • • • • 5 Do not let cookware boil dry to prevent the damage to cookware and glass . Do not use the cooking zones with empty cookware or without cookware. Do not put the aluminium foil on the appliance. Make sure that the airflow space of 5 mm between the worktop and front of the unit below it stays opened. WARNING! If there is a crack on the surface, disconnect power supply to prevent the electrical shock.
Installation instructions • • • • • • Make electrical mains terminal free of voltage. Install correctly to give shock protection. Loose and incorrect plug and socket connections can make the terminal become too hot. A qualified electrician must install the connections in the clamps correctly. Use a strain relief clamp on cable. Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection.
Product description 7 If you use a protection box (the additional accessory), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary.
Operating instructions sensor field a control bar 7 To set the heat setting. It increases or decreases the time. / 8 function 9 It selects the cooking zone. 10 It activates and deactivates STOP+GO 11 It activates and deactivates the Bridge function. Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - The function operates. The Automatic Heat Up function operates. Power function operates. + digit There is a malfunction.
Operating instructions 9 • You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove the object or clean the control panel. • The appliance become too hot (e.g. when, a saucepan boils dry). Before you use the hob again, the cooking zone must be cool. • You use not correct cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes.
Operating instructions You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the illustration), and then decreases to the necessary heat setting. To start the Automatic Heat Up function for a cooking zone: 1. Touch ( comes on in the display). 2. Immediately touch the necessary heat setting. After 3 seconds comes on in the display. To stop the function change the heat setting.
Operating instructions 11 When the countdown comes to an end, the sound operates and 00 flashes. The cooking zone deactivates. • To stop the sound: touch CountUp Timer ( The count up timer) Use the CountUp Timer to monitor how long the cooking zone operates. • To set the cooking zone (if more than 1 cooking zone operate):touch again and again until the indicator of a necessary cooking zone comes on. • To activate the CountUp Timer:touch of the timer comes on.
Helpful hints and tips To deactivate the child safety device • Activate the appliance with . Do not set the heat settings. Touch for 4 seconds. The symbol comes on. • Deactivate the appliance with . To override the child safety device for only one cooking time • Activate the appliance with . The symbol comes on. • Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the appliance. • When you deactivate the appliance with , the child safety device operates again.
Helpful hints and tips 13 Cookware is correct for an induction hob if … • ... some water boils very quickly on a zone set to the highest heat setting. • ... a magnet pulls on to the bottom of the cookware. The bottom of the cookware must be as thick and flat as possible. The noises during operation If you can hear • crack noise: cookware is made of different materials (Sandwich construction).
Care and cleaning Heat setting Use to: Time Hints 7-9 Steam potatoes 20-60 min Use max. ¼ l water for 750 g of potatoes. 7-9 Cook larger quantities of food, stews and soups 60-150 min Up to 3 l liquid plus ingredients. 9-12 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts as necessary Turn halfway through. 12-13 Heavy fry, hash browns, loin steaks, steaks 5-15 min Turn halfway through.
What to do if… 15 WHAT TO DO IF… Problem Possible cause and remedy You cannot activate the appliance or operate it. • Activate the appliance again and set the heat setting in 10 seconds. • You touched 2 or more sensor fields at the same time. Only touch one sensor field. • The Child Safety Device or the Lock or Stop+Go operates. See the chapter Operating instructions. • There is water or fat stains on the control panel. Clean the control panel. A Sound operates and the appliance deactivates.
Environment concerns Problem comes on Possible cause and remedy There is an error in the appliance, because a cookware boils dry. The protection against become too hot for the cooking zone operates. The Automatic Switch Off operates. Deactivate the appliance. Remove the hot cookware. After, approximately 30 seconds activate the cooking zone again. should go out of the display, residual heat indicator can stay.
www.aeg-electrolux.