HK654406FB EN User Manual FR Notice d'utilisation DE Benutzerinformation 2 20 40
www.aeg.com CONTENTS 1. SAFETY INFORMATION...........................................................................................3 2. SAFETY INSTRUCTIONS.......................................................................................... 4 3. PRODUCT DESCRIPTION........................................................................................ 6 4. DAILY USE..................................................................................................................8 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • • • Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector.
ENGLISH • Make sure that a shock protection is installed. • Use the strain relief clamp on the cable. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact an Authorised Service Centre or an electrician to change a damaged mains cable.
www.aeg.com • Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. • This appliance is for cooking purposes only.
ENGLISH Sensor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / The Child Safety Device To lock / unlock the control panel. - Timer indicators of cooking zones To show for which zone you set the time. - Timer display To show the time in minutes. Power function To activate and deactivate the function. 3 4 5 6 - Heat setting display To show the heat setting. 7 - Control bar To set a heat setting. 8 / - To increase or decrease the time.
www.aeg.com 3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 4. DAILY USE WARNING! Refer to Safety chapters. 4.1 Activating and deactivating Touch for 1 second to activate or deactivate the hob. 4.
ENGLISH rear cooking zone. Also when you use large cookware we recommend that you put it near to the rear cooking zone. 4.6 Automatic Heat Up If you activate this function you can get a necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting. To activate the function the cooking zone must be cold. To activate the function for a cooking ( comes on). zone: touch Immediately touch the correct heat setting.
www.aeg.com To activate the function: activate the Minute Minder You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate (the Touch heat setting display shows Deactivate the hob with ). To activate the function: touch . Touch or of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes. To stop the sound: touch . Do not set the heat setting. for 4 seconds. comes on. .
ENGLISH 3. Touch for 3 seconds. comes on. 4. Touch or . P0 comes on. 5. Touch / power level. Power levels of the Timer to set the Refer to “Technical information” chapter. • • • • • • • • • • P0 — 7200 W P1 — 1500 W P2 — 2000 W P3 — 2500 W P4 — 3000 W P5 — 3500 W P6 — 4000 W P7 — 4500 W P8 — 5000 W P9 — 6000 W CAUTION! Make sure that the selected power fits to the house installation fuses. 4.14 Power management function • The heat setting display of the reduced zones changes between two levels.
www.aeg.com Use the induction cooking zones with correct cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain. Cookware is correct for an induction hob if: • some water boils very quickly on a zone set to the highest heat setting. • a magnet pulls on to the bottom of the cookware.
ENGLISH 13 Heat setting Use to: Time Hints 3-5 Simmer rice and milkbased dishes, heating up readycooked meals 25 - 50 min Add the minimum twice as much liquid as rice, mix milk dishes part procedure through 5-7 Steam vegetables, fish, meat 20 - 45 min Add some tablespoons of liquid 7-9 Steam potatoes 20 - 60 min Use max.
www.aeg.com 7.1 What to do if... Problem Possible cause You cannot activate or oper- The hob is not connected to ate the hob. an electrical supply or it is connected incorrectly. The fuse is released. Remedy Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician.
ENGLISH 15 Problem Possible cause Remedy There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals. Refer to "Daily use" chapter. comes on. Automatic Switch Off operates. Deactivate the hob and activate it again. comes on. The Child Safety Device or the Lock function operates. Refer to "Daily use" chapter. comes on. There is no cookware on the zone. Put cookware on the zone. The cookware is incorrect. Use the correct cookware.
www.aeg.com 7.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period.
ENGLISH 8.4 Assembly min. 500mm min. 50mm min. 2mm A min. 2 mm B < 20 mm A min. 2 mm B > 20 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min 30 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.aeg.com min. 12 mm min. 2 mm 8.5 Protection box mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. If you use a protection box (an additional accessory), the front airflow space of 2 9. TECHNICAL INFORMATION 9.1 Rating plate Modell HK654406FB Typ 58 GAD EA AT Induction 7.2 kW Ser.Nr. .................
ENGLISH Cooking zone Nominal power Power function (maximum heat [W] setting) [W] Power function Cookware dimaximum dura- ameter [mm] tion [min] Right rear 2300 10 3200 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware. marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
www.aeg.com TABLE DES MATIÈRES 1. CONSIGNES DE SÉCURITÉ................................................................................... 21 2. INSTRUCTIONS DE SÉCURITÉ.............................................................................. 22 3. DESCRIPTION DE L'APPAREIL.............................................................................. 25 4. UTILISATION QUOTIDIENNE................................................................................27 5. CONSEILS..........................
FRANÇAIS 1. 21 CONSIGNES DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez jamais d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge. N'entreposez rien sur les surfaces de cuisson.
FRANÇAIS panneau de séparation ignifuge sous l'appareil pour en bloquer l'accès. • Assurez-vous de laisser un espace de ventilation de 2 mm entre le plan de travail et l'avant de l'unité qui se trouve dessous. La garantie ne couvre pas les dommages causés par l'absence d'un espace de ventilation adéquat. 2.2 Branchement électrique AVERTISSEMENT! Risque d'incendie ou d'électrocution. • L'ensemble des branchements électriques doit être effectué par un technicien qualifié.
www.aeg.com • N'utilisez jamais l'appareil comme plan de travail ou comme plan de stockage. • Si la surface de l'appareil présente des fêlures, débranchez immédiatement l'appareil pour éviter tout risque d'électrocution. • Les porteurs de pacemakers doivent rester à une distance minimale de 30 cm des zones de cuisson à induction lorsque l'appareil est en cours de fonctionnement. • Lorsque vous versez un aliment dans de l'huile chaude, elle peut éclabousser.
FRANÇAIS 25 3. DESCRIPTION DE L'APPAREIL 3.1 Description de la table de cuisson 1 1 1 1 Zone de cuisson à induction 2 Bandeau de commande 1 2 3.2 Description du bandeau de commande 1 2 11 10 3 4 9 8 5 7 6 Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. Touche Fonction sensitive MARCHE/ARRÊT Pour allumer et éteindre la table de cuisson.
www.aeg.com Touche Fonction sensitive Commentaire 7 - Bandeau de sélection Pour sélectionner un niveau de cuisson. 8 / - Pour augmenter ou diminuer la durée. 9 - Pour choisir la zone de cuisson. 10 STOP+GO Pour activer et désactiver la fonction. 11 Bridge Pour activer et désactiver la fonction. 3.3 Indicateurs de niveau de cuisson Affichage Description La zone de cuisson est désactivée. La zone de cuisson est activée. - La fonction STOP+GO est activée.
FRANÇAIS 27 4. UTILISATION QUOTIDIENNE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 4.1 Activation et désactivation Appuyez sur pendant 1 seconde pour activer ou désactiver la table de cuisson. 4.3 Niveau de cuisson Pour régler ou modifier le niveau de cuisson : Appuyez sur le niveau de cuisson souhaité sur le bandeau de sélection, ou déplacez votre doigt sur le bandeau de sélection jusqu'à atteindre le niveau de cuisson souhaité. 4.
www.aeg.com recommandons de le placer vers la zone de cuisson arrière. 4.6 Démarrage automatique de la cuisson Cette fonction vous permet d'atteindre le niveau de cuisson sélectionné en un temps plus court. Cette fonction active le niveau de cuisson le plus élevé pendant un certain temps puis redescend au niveau sélectionné. Pour activer la fonction, la zone de cuisson doit être froide Pour activer la fonction pour une zone ( de cuisson : appuyez sur s'allume).
FRANÇAIS clignote lentement, le minuteur démarre. 4.10 Verrouillage L'affichage indique, en alternance, le nombre de minutes écoulées. Vous pouvez verrouiller le bandeau de commande pendant que les zones de cuisson fonctionnent. Vous éviterez ainsi une modification accidentelle du réglage du niveau de cuisson. et Pour contrôler la durée de fonctionnement de la zone de cuisson sélectionnée : sélectionnez la zone de cuisson à l'aide de . Le voyant de la zone de cuisson clignote rapidement.
www.aeg.com 4.12 OffSound Control (Désactivation et activation des signaux sonores) Éteignez la table de cuisson. Appuyez sur pendant 3 secondes. L'affichage s'allume, puis s'éteint. Appuyez sur pendant 3 secondes. ou s'allume. Appuyez sur la touche du minuteur pour choisir l'une des options suivantes : • - les signaux sonores sont désactivés • - les signaux sonores sont activés Pour confirmer le réglage, attendez que la table de cuisson s'éteigne automatiquement.
FRANÇAIS 31 Lorsque vous réglez la fonction Limitation de puissance sur plus de 4,5 kW, la puissance de la table de cuisson est répartie entre deux zones de cuisson fonctionnant en paire. 5. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 5.1 Ustensiles de cuisson Sur les zones de cuisson à induction, un champ électromagnétique puissant chauffe les récipients très rapidement. Utilisez des récipients adaptés aux zones de cuisson à induction.
www.aeg.com 5.3 Économies d'énergie 5.5 Exemples de cuisson • Si possible, couvrez toujours les récipients avec un couvercle pendant la cuisson. • Déposez toujours le récipient sur la zone de cuisson avant de mettre celle-ci en fonctionnement. • Vous pouvez utiliser la chaleur résiduelle pour conserver les aliments au chaud ou pour faire fondre. Le rapport entre le niveau de cuisson et la consommation énergétique de la zone de cuisson n'est pas linéaire.
FRANÇAIS 33 Niveau de cuisson Utilisation : Minute- Conseils rie 14 Faire bouillir de l'eau, cuire des pâtes, griller de la viande (goulasch, bœuf braisé), cuire des frites Faire bouillir une grande quantité d'eau. La fonction Booster est activée 6. ENTRETIEN ET NETTOYAGE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 6.1 Informations générales • Nettoyez la table de cuisson après chaque utilisation. • Utilisez toujours un plat de cuisson sont le fond est propre.
www.aeg.com Problème Cause probable Solution Le fusible a disjoncté. Vérifiez que le fusible est bien la cause de l'anomalie. Si les fusibles disjonctent de manière répétée, faites appel à un électricien qualifié. Allumez de nouveau la table de cuisson et réglez le niveau de cuisson en moins de 10 secondes. Vous avez appuyé sur plusieurs touches sensitives en même temps. N'appuyez que sur une seule touche sensitive à la fois. La fonction STOP+GO est activée.
FRANÇAIS Problème Cause probable 35 Solution Aucun signal sonore ne se Les signaux sonores sont dé- Activez les signaux sonores. fait entendre lorsque vous sactivés. Reportez-vous au chapitre appuyez sur les touches sen« Utilisation quotidienne ». sitives du bandeau. s'affiche. Arrêt automatique est activé. Éteignez la table de cuisson puis allumez-la de nouveau. s'affiche. La fonction Dispositif de sécurité enfants ou Verrouillage est activée. s'affiche.
www.aeg.com Problème s'affiche. Cause probable Solution Une erreur s'est produite dans la table de cuisson car un récipient chauffe à vide. Arrêt automatique et la protection anti-surchauffe des zones sont activés. Éteignez la table de cuisson. Enlevez le récipient chaud. Au bout d'environ 30 secondes, remettez la zone en fonctionnement. Si le problème était causé par le récipient, le message d'erreur disparaît. Voyant de chaleur résiduelle peut rester affiché.
FRANÇAIS ATTENTION! Ne percez et ne soudez jamais les extrémités des fils. Cela est strictement interdit ! ATTENTION! Ne raccordez pas le câble sans gaine à l'extrémité. 2. Dénudez les extrémités des fils noir et marron. 3. Appliquez un nouvelle gaine de 1,5 mm² à chaque extrémité du câble. (nécessite un outil spécial) Coupe transversale du câble Raccordement biphasé 1. Retirez le câble et la gaine des fils noir et marron.
www.aeg.com A min. 2 mm B < 20 mm A min. 2 mm B > 20 mm min. 500 mm min 30 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min. 38 mm min. 2 mm R 5mm min. 55mm 490+1mm 560+1mm min. 12 mm min.
FRANÇAIS 8.5 Enceinte de protection 39 l'espace de circulation d'air de 2 mm et le fond de protection installé directement sous la table de cuisson ne sont plus nécessaires. L'enceinte de protection n'est pas disponible dans tous les pays. Veuillez contacter votre revendeur local. Vous ne pouvez pas utiliser l'enceinte de protection si vous installez la table de cuisson au-dessus d'un four. Si vous utilisez une enceinte de protection (accessoire supplémentaire), 9. CARACTÉRISTIQUES TECHNIQUES 9.
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSANWEISUNGEN.............................................................................. 41 2. SICHERHEITSINFORMATIONEN.......................................................................... 42 3. GERÄTEBESCHREIBUNG.......................................................................................45 4. TÄGLICHER GEBRAUCH........................................................................................47 5. TIPPS UND HINWEISE....................
DEUTSCH 1. 41 SICHERHEITSANWEISUNGEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.
www.aeg.com • • • • • • • • Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. Versuchen Sie nicht einen Brand mit Wasser zu löschen, sondern schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke. Legen Sie keine Gegenstände auf dem Kochfeld ab. Legen Sie keine Metallgegenstände wie Messer, Gabeln, Löffel oder Topfdeckel auf die Oberfläche des Kochfelds, da diese heiß werden können.
DEUTSCH Abstand für die Luftzirkulation vorhanden ist. • Der Boden des Geräts kann heiß werden. Achten Sie darauf eine feuerfeste Trennplatte unter dem Gerät anzubringen, damit der Boden nicht zugänglich ist. • Achten Sie darauf, dass zwischen der Arbeitsplatte und dem Gerät darunter ein Abstand von 2 mm zur Belüftung frei gelassen wird. Schäden, die durch das Fehlen eines Belüftungsabstands entstehen, sind von der Garantie ausgenommen. 2.2 Elektrischer Anschluss WARNUNG! Brand- und Stromschlaggefahr.
www.aeg.com • Die Lüftungsöffnungen dürfen nicht abgedeckt werden. • Lassen Sie das Gerät bei Betrieb nicht unbeaufsichtigt. • Schalten Sie die Kochzonen nach jedem Gebrauch aus. • Verlassen Sie sich nicht auf die Topferkennung. • Legen Sie kein Besteck und keine Topfdeckel auf die Kochzonen. Sie werden heiß. • Bedienen Sie das Gerät nicht mit feuchten oder nassen Händen oder wenn es mit Wasser in Kontakt gekommen ist. • Benutzen Sie das Gerät nicht als Arbeits- oder Abstellfläche.
DEUTSCH Geräts wenden Sie sich an die zuständige kommunale Behörde vor Ort. • Trennen Sie das Gerät von der Stromversorgung. 45 • Schneiden Sie das Netzkabel ab, und entsorgen Sie es. 3. GERÄTEBESCHREIBUNG 3.1 Kochfeldanordnung 1 1 1 1 Induktionskochzone 2 Bedienfeld 1 2 3.2 Bedienfeldanordnung 1 2 11 10 3 4 9 8 5 7 6 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen.
www.aeg.com Sensorfeld 5 Funktion Anmerkung Power function Ein- und Ausschalten der Funktion. 6 - Kochstufenanzeige Zeigt die Kochstufe an. 7 - Einstellskala Einstellen der Kochstufe. 8 / - Erhöhen oder Verringern der Zeit. 9 - Auswählen der Kochzone. 10 STOP+GO Ein- und Ausschalten der Funktion. 11 Bridge Ein- und Ausschalten der Funktion. 3.3 Anzeigen der Kochstufen Display Beschreibung Die Kochzone ist ausgeschaltet. Die Kochzone ist eingeschaltet.
DEUTSCH 47 4. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. Berühren Sie die Einstellskala auf der gewünschten Kochstufe oder fahren Sie mit dem Finger entlang der Skala bis zur gewünschten Kochstufe. 4.1 Ein- und Ausschalten Berühren Sie 1 Sekunde lang , um das Kochfeld ein- oder auszuschalten. 4.2 Abschaltautomatik Mit dieser Funktion wird das Kochfeld in folgenden Fällen automatisch ausgeschaltet: 4.4 Verwendung der Kochzonen • Alle Kochzonen sind ausgeschaltet.
www.aeg.com 4.6 Ankochautomatik Auswählen der Kochzone: Berühren Sie Wenn Sie diese Funktion einschalten, lässt sich die erforderliche Kochstufeneinstellung in kürzerer Zeit erzielen. Bei Verwendung dieser Funktion wird eine gewisse Zeit lang die höchste Kochstufe eingestellt und anschließend auf die erforderliche Stufe zurückgeschaltet. so oft, bis die Kontrolllampe der gewünschten Kochzone aufleuchtet. Zum Einschalten der Funktion muss die Kochzone abgekühlt sein.
DEUTSCH schneller. Im Display wird die Einschaltdauer der Zone angezeigt. Ausschalten der Funktion: Wählen Sie die Kochzone mit Zum Ausschalten der Funktion: Berühren Sie . Die vorherige Kochstufe wird angezeigt. und berühren Sie Diese Funktion wird auch ausgeschaltet, sobald das Kochfeld ausgeschaltet wird. oder . Die Kontrolllampe der Kochzone erlischt.
www.aeg.com Warten Sie, bis das Kochfeld automatisch ausgeschaltet wird, um Ihre Auswahl zu bestätigen. Haben Sie die Funktion auf eingestellt, ertönt der Signalton nur in folgenden Fällen: • • • • Bei der Berührung von Kurzzeit-Wecker erlischt Kurzzeitmesser erlischt Wenn das Bedienfeld bedeckt ist. 4.13 Leistungsbegrenzung Ursprünglich ist das Kochfeld auf die höchstmögliche Leistungsstufe eingestellt. Erhöhen oder Verringern der Leistungsstufe: 1. Schalten Sie das Kochfeld aus. 2.
DEUTSCH 51 5. TIPPS UND HINWEISE WARNUNG! Siehe Kapitel Sicherheitshinweise. 5.1 Kochgeschirr Das Kochgeschirr wird bei Induktionskochzonen durch ein starkes Magnetfeld sehr schnell erhitzt. Benutzen Sie für die Induktionskochzonen geeignetes Kochgeschirr. Kochgeschirrmaterial • Geeignet: Gusseisen, Stahl, emaillierter Stahl, Edelstahl, ein mehrlagiger Topfboden (wenn vom Hersteller als geeignet markiert). • Nicht geeignet: Aluminium, Kupfer, Messing, Glas, Keramik, Porzellan.
www.aeg.com Bei den Angaben in der folgenden Tabelle handelt es sich um Richtwerte. Kochstufe -1 Verwendung: Zeit Hinweise Warmhalten von gegarten Speisen Nach Bedarf Legen Sie einen Deckel auf das Kochgeschirr. 1-3 Sauce Hollandaise, Schmelzen 5 - 25 von: Butter, Schokolade, Gelat- Min. ine Ab und zu umrühren 1-3 Stocken: Luftiges Omelett, ge- 10 - 40 backene Eier Min. Mit Deckel garen 3-5 Köcheln von Reis und Milchgerichten, Erhitzen von Fertiggerichten 25 - 50 Min.
DEUTSCH • Verwenden Sie einen Spezialreiniger zur Reinigung der Kochfeldoberfläche. 6.2 Reinigen des Kochfelds • Folgendes muss sofort entfernt werden: geschmolzener Kunststoff, Plastikfolie, zuckerhaltige Lebensmittel. Andernfalls können die Verschmutzungen das Kochfeld beschädigen. Den speziellen Reinigungsschaber schräg zur 53 Glasfläche ansetzen und über die Oberfläche bewegen.
www.aeg.com Problem Mögliche Ursache Abhilfe Ein akustisches Signal ertönt Mindestens ein Sensorfeld und das Kochfeld schaltet wurde bedeckt. ab. Wenn das Kochfeld ausgeschaltet wird, ertönt ein akustisches Signal. Entfernen Sie den Gegenstand von den Sensorfeldern. Das Kochfeld wird ausgeschaltet. Sie haben etwas auf das Entfernen Sie den Gegenstand vom Sensorfeld. Restwärmeanzeige funktioniert nicht. Die Kochzone ist nicht heiß, da sie nur kurze Zeit in Betrieb war.
DEUTSCH Problem 55 Mögliche Ursache Abhilfe Der Durchmesser des Kochgeschirrbodens ist zu klein für die Kochzone. Verwenden Sie Kochgeschirr mit den richtigen Abmessungen. Siehe Kapitel „Technische Daten“. Das Kochgeschirr bedeckt das Kreuz/Quadrat nicht. Das Kreuz/Quadrat muss vollständig bedeckt sein. und eine Zahl werden an- Es ist ein Fehler aufgetreten. Trennen Sie das Kochfeld eine Zeit lang vom Stromgezeigt. netz. Schalten Sie die Sicherung im Sicherungskasten der Hausinstallation aus.
www.aeg.com 8. MONTAGE WARNUNG! Siehe Kapitel Sicherheitshinweise. sich bitte an Ihren lokalen autorisierten Kundendienst. WARNUNG! Die elektrischen Anschlüsse müssen von einem qualifizierten Elektriker ausgeführt werden. 8.1 Vor der Montage Notieren Sie vor der Montage des Kochfelds folgende Daten, die Sie auf dem Typenschild finden. Das Typenschild ist auf dem Boden des Kochfelds angebracht. ACHTUNG! Verdrillen oder verlöten Sie die Kabelenden nicht. Dies ist streng verboten! Seriennummer .......
DEUTSCH 8.4 Montage min. 500mm min. 50mm min. 2mm A min. 2 mm B < 20 mm A min. 2 mm B > 20 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min 30 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.aeg.com min. 12 mm min. 2 mm 8.5 Schutzboden des vorderen Belüftungsabstands von 2 mm und die Schutzmatte direkt unter dem Gerät nicht nötig. Der Schutzboden ist möglicherweise in einigen Ländern nicht erhältlich. Wenden Sie sich an Ihren Händler vor Ort. Wenn Sie das Kochfeld über einem Backofen einsetzen, können Sie den Schutzboden nicht verwenden. Falls Sie einen Schutzboden (optionales Zubehör) verwenden, ist die Einhaltung 9. TECHNISCHE DATEN 9.
DEUTSCH Kochzone Nennleistung (höchste Kochstufe) [W] Power function [W] Power function maximale Einschaltdauer [Min.] Durchmesser des Kochgeschirrs [mm] Vorne rechts 2300 3200 10 125 - 210 Hinten rechts 2300 3200 10 125 - 210 Die Leistung der Kochzonen kann geringfügig von den Daten in der Tabelle abweichen. Sie ändert sich je nach Material und Abmessungen des Kochgeschirrs.
892965478-A-032014 www.aeg.