EN User Manual Hob HK673520FB
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. CONDITIONS OF USE....................................................................................................4 3. SAFETY INSTRUCTIONS................................................................................................ 4 4. PRODUCT DESCRIPTION.............................................................................................. 6 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • • • Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector. If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.
ENGLISH • Before carrying out any operation make sure that the appliance is disconnected from the power supply. • Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician. • Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. • Use the correct electricity mains cable. • Do not let the electricity mains cable tangle.
www.aeg.com WARNING! Risk of damage to the appliance. • Do not keep hot cookware on the control panel. • Do not let cookware to boil dry. • Be careful not to let objects or cookware fall on the appliance. The surface can be damaged. • Do not activate the cooking zones with empty cookware or without cookware. • Do not put aluminium foil on the appliance. • Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic.
ENGLISH 7 4.2 Control panel layout 1 2 11 3 10 4 6 5 9 8 7 To see the control panel activate the appliance with . Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 STOP+GO To activate and deactivate the function. 2 Bridge To activate and deactivate the function. - Heat setting display To show the heat setting. - Timer indicators of cooking To show for which zone you set the time.
www.aeg.com Display Description STOP+GO function operates. Automatic Heat Up function operates. Power function operates. + digit There is a malfunction. / OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual heat. / Lock / The Child Safety Device function operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off function operates. 4.
ENGLISH The relation between the heat setting and the time after which the hob deactivates: Heat setting ,1-3 The hob deactivates after 6 hours 4-7 5 hours 8-9 4 hours 10 - 14 1.5 hour 5.3 The heat setting To set or change the heat setting: Touch the control bar at the correct heat setting or move your finger along the control bar until you reach the correct heat setting. 9 To activate the function: touch . To set or change the heat setting touch one of the control sensors.
www.aeg.com First set the cooking zone then set the function. You can set the heat setting before or after you set the function. To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. To activate the function: touch of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down. To see the remaining time: set the cooking zone with .
ENGLISH 5.11 The Child Safety Device • • • • This function prevents an accidental operation of the hob. To activate the function: activate the hob with . Do not set the heat setting. for 4 seconds. Touch Deactivate the hob with comes on. . To deactivate the function: activate the hob with Touch . Do not set the heat setting. for 4 seconds. Deactivate the hob with comes on. . To override the function for only one cooking time: activate the hob with . comes on. Touch for 4 seconds.
www.aeg.com • not correct: aluminium, copper, brass, glass, ceramic, porcelain. Cookware is correct for an induction hob if: • some water boils very quickly on a zone set to the highest heat setting. • a magnet pulls on to the bottom of the cookware. The bottom of the cookware must be as thick and flat as possible. Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit.
ENGLISH 13 Heat setting Use to: Time (min) Hints 7-9 Steam potatoes. 20 - 60 Use max. ¼ l water for 750 g of potatoes. 7-9 Cook larger quantities of food, 60 - 150 stews and soups. Up to 3 l liquid plus ingredients. 9 - 12 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts. as necessary Turn halfway through. 12 - 13 Heavy fry, hash browns, loin steaks, steaks. 5 - 15 Turn halfway through.
www.aeg.com Problem Possible cause Remedy The fuse is released. Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician. Activate the hob again and set the heat setting in less than 10 seconds. You touched 2 or more sensor fields at the same time. Touch only one sensor field. STOP+GO function operates. Refer to "Daily use" chapter. There is water or fat stains on the control panel. Clean the control panel.
ENGLISH Problem 15 Possible cause Remedy comes on. The Child Safety Device or the Lock function operates. Refer to "Daily use" chapter. comes on. There is no cookware on the zone. Put cookware on the zone. The cookware is incorrect. Use the correct cookware. Refer to “Hints and tips” chapter. The diameter of the bottom of the cookware is too small for the zone. Use cookware with correct dimensions. Refer to “Technical information” chapter. The cookware does not cover the cross / square.
www.aeg.com Problem comes on. Possible cause Remedy The electrical connection is incorrect. The hob is connected only to one phase. Speak to a qualified electrician to check the installation. Refer to the connection diagram. 8.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate.
ENGLISH 9.4 Assembly min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.aeg.com min. 12 mm min. 2 mm 9.5 Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. 10. TECHNICAL INFORMATION 10.1 Rating plate Modell HK673520FB Typ 58 GAD C4 AU Induction 7.4 kW Ser.Nr. ................
ENGLISH 19 10.2 Cooking zones specification Cooking zone Nominal power Power function (maximum heat [W] setting) [W] Power function Cookware diammaximum dura- eter [mm] tion [min] Left front 2300 3200 10 125 - 210 Left rear 2300 3200 10 125 - 210 Right rear 1800 / 3500 2800 / 3700 5 145 - 180 / 245 280 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
www.aeg.com 12. WARRANTY FOR SALES IN AUSTRALIA AND NEW ZEALAND ALL AEG BRANDED APPLIANCES This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
ENGLISH 6. 7. 8. 9. owner’s cost and risk while in transit to and from Electrolux or its ASC. Proof of purchase is required before you can make a claim under this warranty. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship.
www.aeg.com Important Notice Before calling for service, please ensure that the steps listed in clause 13 above have been followed. SERVICE AUSTRALIA www.aeg.com/au FOR SERVICE or to find the address of your nearest state service centre in Australia PLEASE CALL 1300 363 664 OR EMAIL customercare@aegaustralia.com.
ENGLISH 23
867312929-A-402014 www.aeg.