HK764400PB EN User manual
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com • Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. • Do not store items on the cooking surfaces. • Do not use a steam cleaner to clean the appliance. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • If the glass ceramic surface is cracked, switch off the appliance to avoid the possibility of electric shock.
ENGLISH • • • • • • pliance or hot cookware, when you connect the appliance to the near sockets Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. Make sure that a shock protection is installed. Use the strain relief clamp on cable. Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact the Service or an electrician to change a damaged mains cable.
www.aeg.com • Clean regularly the appliance to prevent the deterioration of the surface material. • Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Contact your municipal authority for information on how to discard the appliance correctly. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. 2.
ENGLISH 7 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. sensor field function To activate and deactivate the appliance. 1 A heat setting display 2 To show the heat setting. To activate the Power function. 3 A control bar 4 To set a heat setting. To increase or decrease the time. / 5 To set a cooking zone. 6 7 The timer display To show the time in minutes.
www.aeg.com 4. DAILY USE 4.1 Activation and deactivation Touch for 1 second to activate or deactivate the appliance. 4.2 Automatic Switch Off The function deactivates the appliance automatically if: • All cooking zones are deactivated ( ). • You do not set the heat setting after you activate the appliance. • You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc.). An acoustic signal sounds some time and the appliance deactivates.
ENGLISH back to highest heat setting. To activate, touch , comes on. To deactivate, change the heat setting. 4.6 Power management The power management divides the power between two cooking zones in a pair (see the illustration). The power function increases the power to the maximum level for one cooking zone in the pair. The power in the second cooking zone automatically decreases. The heat setting display for the reduced zone changes between two levels. 9 • To change the Count Down Timer: .
www.aeg.com 4.8 STOP+GO The function sets all cooking zones that operate to the lowest heat setting ( ). When operates, you cannot change the heat setting. The function does not stop the timer function. • To activate this function touch . The symbol comes on. • To deactivate this function touch . The heat setting that you set before comes on. 4.9 Lock When the cooking zones operate, you can lock the control panel, but not . It prevents an accidental change of the heat setting.
ENGLISH 5.1 Cookware for induction cooking zones Use the induction cooking zones with correct cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain. Cookware is correct for an induction hob if … • ... some water boils very quickly on a zone set to the highest heat setting.. • ... a magnet pulls on to the bottom of the cookware.
www.aeg.
ENGLISH Scratches or dark stains on the glass-ceramic cause no effect on how the appliance operates. To remove the dirt: – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass . Put the scraper on the glass surface at an acute angle and move the blade on the surface . 1. 13 – Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations.
www.aeg.com Problem Possible cause Remedy The heat setting changes The Power management between two levels. is activated. Refer to “Power management”. The sensor fields become hot. Put large cookware on the rear cooking zones if necessary. The cookware is too large or you put it too near to the controls. There is no signal when The signals are deactivayou touch the panel sen- ted. sor fields. Activate the signals. Refer to “OffSound control”. comes on The Automatic Switch Off operates.
ENGLISH Problem comes on Possible cause There is an error in the appliance because a cookware boils dry. The overheating protection for the cooking zones and the Automatic Switch Off operates. If you tried the above solutions and cannot repair the problem, speak to your dealer or the customer service. Give the data from the rating plate, three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. 15 Remedy Deactivate the appliance.
www.aeg.com 8.3 Assembly min. 500mm min. 50mm min. 2mm B A min. 2 mm < 20 mm B A min. 2 mm > 20 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min 30 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min. 12 mm min. 2 mm R 5mm 55mm +1 490+1mm 680 mm min. 38 mm min.
ENGLISH 17 If you use a protection box (an additional accessory1)), the front airflow space of 2 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. 1) The protection box accessory may not be available in some countries. Please contact your local supplier. 9. TECHNICAL INFORMATION Modell HK764400PB Prod.Nr. 949 595 097 01 Typ 58 GDD D6 WG 200 V 50 - 60 Hz 6.0 kW Made in Germany Ser.Nr. .......... 6.
www.aeg.
ENGLISH 19
892955181-A-382012 www.aeg.
