HK854220FB EN INDUCTION HOB USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 7 8 12 14 14 16 Safety information Installation instructions Product description Operating instructions Helpful hints and tips Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.
Installation instructions • • • • 5 Do not let cookware boil dry to prevent the damage to cookware and glass . Do not use the cooking zones with empty cookware or without cookware. Do not put the aluminium foil on the appliance. Make sure that the airflow space of 5 mm between the worktop and front of the unit below it stays opened. WARNING! If there is a crack on the surface, disconnect power supply to prevent the electrical shock.
Installation instructions • • • • • • Make electrical mains terminal free of voltage. Install correctly to give shock protection. Loose and incorrect plug and socket connections can make the terminal become too hot. A qualified electrician must install the connections in the clamps correctly. Use a strain relief clamp on cable. Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection.
Product description If you use a protection box (the additional accessory), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. PRODUCT DESCRIPTION General overview 1 180 300 mm mm 180 145 5 4 mm 1 Induction cooking zone 1800 W, with Power function 2800 W (minimum cookware diameter = 145 mm). 2 Induction cooking zone 2400 W, with Power function 3700 W (minimum cookware diameter = 210 mm).
Operating instructions sensor field the timer display 4 function It shows the time in minutes. It activates the Power function. 5 6 a heat setting display It shows the heat setting. 7 a control bar To set the heat setting. It increases or decreases the time. / 8 9 It selects the cooking zone. 10 It activates and deactivates STOP+GO Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - The function operates.
Operating instructions 9 Automatic Switch Off The function stops the hob automatically if: • All cooking zones are deactivated. • You do not set the heat setting after you activate the appliance. • You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove the object or clean the control panel. • The appliance become too hot (e.g. when, a saucepan boils dry).
Operating instructions 2. Immediately touch the necessary heat setting. After 3 seconds play. To stop the function change the heat setting. comes on in the dis- Power function The Power function makes more power available to the induction cooking zones. The Power function is activated for 10 minutes at most. After, that the induction cooking zone automatically sets back to highest heat setting. To activate, touch , comes on. To deacti.
Operating instructions 11 • To set the cooking zone (if more than 1 cooking zone operate):touch again and again until the indicator of a necessary cooking zone comes on. • To activate the CountUp Timer:touch of the timer comes on. When the indicator of the cooking zone starts to flash slow, the time counts up. The display switches between and counted time (minutes). • To see how long the cooking zone operates: set the cooking zone with . The indicator of the cooking zone starts to flash quickly.
Helpful hints and tips • Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the appliance. • When you deactivate the appliance with , the child safety device operates again. OffSound Control (Deactivation and activation of the sounds) Deactivation of the sounds Deactivate the appliance. Touch for 3 seconds. The displays come on and go out. Touch for 3 seconds. comes on, the sound is on. Touch , comes on, the sound is off.
Helpful hints and tips 13 • whistle sound: you use one or more cooking zones with high power levels and the cookware is made of different materials (Sandwich construction). • humming: you use high power levels. • clicking: electric switching occurs. • hissing, buzzing: the fan operates. The noises are normal and do not refer to appliance malfunction. Energy saving • If it is possible, always put the lids on the cookware. • Put cookware on a cooking zone before you start it.
Care and cleaning Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. CARE AND CLEANING Clean the appliance after each use. Always use cookware with clean bottom. WARNING! The sharp objects and abrasive cleaning agents can cause damage to the appliance.
What to do if… Problem 15 Possible cause and remedy The residual heat indicator does The cooking zone is not hot because it operated only for a short not comes on. time. If the cooking zone should be hot, speak to the service centre. The Automatic Heat Up function does not operate. • There is still residual heat on the cooking zone. Let the cooking zone become sufficiently cool. • The highest heat setting is set. The highest heat setting has the same power as the Automatic Heat Up function.
Environment concerns ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
www.aeg-electrolux.