HK8542H1XB EN FR DE USER MANUAL User Manual Hob Notice d'utilisation Table de cuisson Benutzerinformation Kochfeld 2 23 46
www.aeg.com CONTENTS 1. SAFETY INFORMATION...........................................................................................3 2. SAFETY INSTRUCTIONS.......................................................................................... 4 3. PRODUCT DESCRIPTION........................................................................................ 7 4. DAILY USE..................................................................................................................8 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH between the bottom of the appliance and the upper drawer, is sufficient for air circulation. • The bottom of the appliance can get hot. Make sure to install a noncombustible separation panel under the appliance to prevent access to the bottom. • Make sure that the ventilation space of 2 mm, between the worktop and the front of the below unit, is free. The warranty does not cover damages caused by the lack of an adequate ventilation space. 2.
www.aeg.com appliance from the power supply. This to prevent an electrical shock. • Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation. • When you place food into hot oil, it may splash. WARNING! Risk of fire and explosion • Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
ENGLISH 7 3. PRODUCT DESCRIPTION 3.1 Cooking surface layout 1 1 180 mm 145 mm 210 mm 1 Induction cooking zone 2 Control panel 180 mm 1 2 1 3.2 Control panel layout 1 2 3 4 11 5 6 10 9 7 8 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 ON / OFF 2 Lock / The Child Safety De- To lock / unlock the control panel. vice 3 STOP+GO To activate and deactivate the function.
www.aeg.com Sensor Function field 8 / 9 10 11 - Comment - To select the cooking zone. - To increase or decrease the time. Power function To activate and deactivate the function. Control bar To set a heat setting. 3.3 Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - STOP+GO function operates. Automatic Heat Up function operates. Power function operates. + digit There is a malfunction.
ENGLISH 9 4.1 Activating and deactivating Touch for 1 second to activate or deactivate the hob. 4.2 Automatic Switch Off The function deactivates the hob automatically if: • all cooking zones are deactivated, • you do not set the heat setting after you activate the hob, • you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. • the hob gets too hot (e.g.
www.aeg.com To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. Minute Minder You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate. The To activate the function: touch of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down. heat setting display shows To see the remaining time: set the cooking zone with .
ENGLISH To activate the function: activate the hob with Touch . Do not set the heat setting. comes on. 4. Touch . 5. Touch / power level. Power levels for 4 seconds. Deactivate the hob with To deactivate the function: activate the hob with Touch . Do not set the heat setting. for 4 seconds. Deactivate the hob with comes on. . To override the function for only one cooking time: activate the hob with . comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob.
www.aeg.com automatically and adjusts the speed of the fan. Automatic modes Automatic light When you set the Power limitation function to more than 4.5 kW, power of the hob is divided between two cooking zones in a pair.
ENGLISH When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds. Operating the fan speed manually You can also operate the function manually. To do that touch when the hob is active. This deactivates automatic operation of the function and allows you to change the fan speed manually.
www.aeg.com 5.3 Öko Timer (Eco Timer) To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation. power is not linear. When you increase the heat setting, it is not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power.
ENGLISH 5.5 Hints and Tips for Hob²Hood function When you operate the hob with the function: • Protect the hood panel from direct sunlight. • Do not spot halogen light on the hood panel. • Do not cover the hob panel. • Do not interrupt the signal between the hob and the hood (for example with a hand or a cookware handle). See the picture. Hood in the picture is only exemplary. 15 It may happen that other remote controlled appliances may block the signal.
www.aeg.com 7. TROUBLESHOOTING WARNING! Refer to Safety chapters. 7.1 What to do if... Problem Possible cause You cannot activate or oper- The hob is not connected to ate the hob. an electrical supply or it is connected incorrectly. The fuse is blown. Remedy Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
ENGLISH 17 Problem Possible cause The heat setting changes between two levels. Power management function Refer to "Daily use" chapter. operates. The sensor fields become hot. The cookware is too large or Put large cookware on the you put it too near to the rear zones if possible. controls. There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals. Refer to "Daily use" chapter. comes on. Automatic Switch Off operates.
www.aeg.com 7.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period.
ENGLISH One-phase connection - 230 V~ L Black and brown Two-phase connection - 400 V 2 ~ N Black L1 Brown L2 8.4 Assembly min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm < 20 mm B 57 mm 41 mm 31 mm B > 20 mm min. 500 mm A 12 mm 28 mm 38 mm A B min 30 mm min.
www.aeg.com min. 38 mm min. 2 mm R 5mm min. 55mm +1 490+1mm 750 mm min. 12 mm min. 2 mm 8.5 Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven.
ENGLISH 21 9. TECHNICAL DATA 9.1 Rating plate Modell HK8542H1XB Typ 60 GBD C1 AT Induction 7.2 kW Ser.Nr. ................. AEG PNC 949 597 030 01 220 - 240 V 50 - 60 Hz Made in Germany 7.2 kW 9.
www.aeg.com EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance 10.2 Energy saving You can save energy during everyday cooking if you follow below hints. • When you heat up water, use only the amount you need. • If it is possible, always put the lids on the cookware. • Before you activate the cooking zone put the cookware on it. • Put the smaller cookware on the smaller cooking zones. • Put the cookware directly in the centre of the cooking zone.
FRANÇAIS 23 TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ............................................................................ 24 2. CONSIGNES DE SÉCURITÉ................................................................................... 26 3. DESCRIPTION DE L'APPAREIL.............................................................................. 28 4. UTILISATION QUOTIDIENNE................................................................................30 5. CONSEILS...............................
1. www.aeg.com INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
FRANÇAIS • • • • • • • • • • • 25 tenus à l'écart, à moins d'être surveillés en permanence. Ne faites pas fonctionner l'appareil avec un minuteur externe ou un système de commande à distance. AVERTISSEMENT : Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau.
www.aeg.com 2. CONSIGNES DE SÉCURITÉ 2.1 Installation AVERTISSEMENT! L'appareil doit être installé uniquement par un professionnel qualifié. • Retirez l'intégralité de l'emballage. • N'installez pas et ne branchez pas un appareil endommagé. • Suivez scrupuleusement les instructions d'installation fournies avec l'appareil. • Respectez l'espacement minimal requis par rapport aux autres appareils et éléments. • Soyez toujours vigilants lorsque vous déplacez l'appareil car il est lourd.
FRANÇAIS • Si la prise de courant est lâche, ne branchez pas la fiche d'alimentation secteur. • Ne tirez jamais sur le câble d'alimentation pour débrancher l'appareil. Tirez toujours sur la fiche. • N'utilisez que des systèmes d'isolation appropriés : des coupecircuits, des fusibles (les fusibles à visser doivent être retirés du support), un disjoncteur différentiel et des contacteurs. • L'installation électrique doit être équipée d'un dispositif d'isolement à coupure omnipolaire.
www.aeg.com Soulevez toujours ces objets lorsque vous devez les déplacer sur la surface de cuisson. • Cet appareil est exclusivement destiné à un usage culinaire. Ne l'utilisez pas pour des usages autres que celui pour lequel il a été conçu, à des fins de chauffage par exemple. 2.4 Entretien et nettoyage • Nettoyez régulièrement l'appareil afin de maintenir le revêtement en bon état. • Éteignez l'appareil et laissez-le refroidir avant de le nettoyer.
FRANÇAIS 29 3.2 Description du bandeau de commande 1 2 3 4 11 5 6 10 9 7 8 Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. Touche sensitive Fonction Commentaire 1 MARCHE/ARRÊT Pour allumer et éteindre la table de cuisson. 2 Verrouillage / Dispositif de Pour verrouiller ou déverrouiller le bandeau sécurité enfants de commande. 3 STOP+GO Pour activer et désactiver la fonction.
www.aeg.com Affichage Description La zone de cuisson est activée. - La fonction STOP+GO est activée. La fonction Démarrage automatique de la cuisson est activée. Fonction Booster est activée. + chiffre Une anomalie de fonctionnement s'est produite. / OptiHeat Control (Voyant de chaleur résiduelle à trois niveaux) : continuer la cuisson / maintien au chaud / chaleur résiduelle. / La fonction Verrouillage /Dispositif de sécurité enfants est activée.
FRANÇAIS 31 la zone de cuisson se désactive automatiquement au bout de 2 minutes. • vous ne désactivez pas la zone de cuisson ou ne modifiez pas le niveau de cuisson. Au bout de quelques Pour activer la fonction pour une zone instants, s'allume et la table de cuisson s'éteint. La relation entre le niveau de cuisson et la durée après laquelle la table de cuisson s'éteint : Pour désactiver la fonction : modifiez le niveau de cuisson.
www.aeg.com de . Le voyant de la zone de cuisson clignote rapidement. L'affichage indique la durée restante. Pour modifier la durée : sélectionnez la zone de cuisson à l'aide de sur ou . Appuyez Minuterie Vous pouvez utiliser cette fonction comme Minuterie lorsque la table de cuisson est allumée mais que les zones de cuisson ne sont pas activées. L'affichage du niveau de cuisson indique . .
FRANÇAIS Pour confirmer le réglage, attendez que la table de cuisson s'éteigne automatiquement. Lorsque vous éteignez la table de cuisson, cette fonction est également désactivée. Lorsque cette fonction est réglée sur l'appareil émet des signaux sonores uniquement lorsque : 4.9 Dispositif de sécurité enfants Cette fonction permet d'éviter une utilisation involontaire de la table de cuisson. Pour activer la fonction : allumez la table de cuisson en appuyant sur .
www.aeg.com 4.12 Fonction Gestionnaire de puissance • Des zones de cuisson sont regroupées en fonction de l'emplacement et du nombre de phases de la table de cuisson. Reportez-vous à l'illustration. • Chaque phase dispose d'une charge électrique maximale de 3 700 W. • La fonction répartit la puissance entre les zones de cuisson raccordées à la même phase. • La fonction s'active lorsque la charge électrique totale des zones de cuisson raccordées à une phase simple dépasse 3 700 W.
FRANÇAIS Modes automatiques Éclairage automatique Faire Faire bouillir1) frire2) Mode H0 Désac. Désac. Désac. Mode H1 On Désac. Désac. Mode H2 3) Vitesse Vitesse du venti- du ventilateur 1 lateur 1 Mode H3 On Désac.
www.aeg.com L'éclairage de la hotte s'éteint 2 minutes après avoir éteint la table de cuisson. 5. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 5.1 Ustensiles de cuisson Sur les zones de cuisson à induction, un champ électromagnétique puissant chauffe les récipients très rapidement. Utilisez des récipients adaptés aux zones de cuisson à induction.
FRANÇAIS utilise moins de la moitié de sa puissance. Niveau de cuisson Utilisation : 37 Les valeurs figurant dans le tableau suivant sont fournies à titre indicatif. Durée (min) Conseils Conservez les aliments cuits au au bechaud. soin Placez un couvercle sur le récipient. 1-3 Sauce hollandaise, faire fondre : beurre, chocolat, gélatine. 5 - 25 Mélangez de temps en temps. 1-3 Solidifier : omelettes, œufs cocotte. 10 - 40 Couvrez pendant la cuisson.
www.aeg.com l'illustration n'est donnée qu'à titre d'exemple. Hottes de cuisinière dotées de la fonction Hob²Hood Pour trouver la gamme complète des hottes qui sont dotées de cette fonction, consultez notre site web destiné aux consommateurs. Les hottes AEG qui sont dotées de cette fonction doivent avoir le symbole . Il peut arriver que d'autres appareils contrôlés à distance bloquent le signal.
FRANÇAIS 39 7. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 7.1 En cas d'anomalie de fonctionnement Problème Cause probable Solution Vous ne pouvez pas allumer la table de cuisson ni la faire fonctionner. La table de cuisson n'est pas connectée à une source d'alimentation électrique ou le branchement est incorrect. Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique.
www.aeg.com Problème Cause probable Solution La fonction Hob²Hood ne fonctionne pas. Vous avez couvert le bandeau de commande. Retirez l'objet du bandeau de commande. La fonction de démarrage automatique de la cuisson ne fonctionne pas. La zone est chaude. Laissez la zone de cuisson refroidir. Le niveau de cuisson le plus élevé est réglé. Le niveau de cuisson le plus élevé est identique à la fonction. Le niveau de cuisson oscille entre deux niveaux.
FRANÇAIS Problème s'allume. 41 Cause probable Solution Une erreur s'est produite dans la table de cuisson car un récipient a chauffé à vide. La fonction Arrêt automatique et la protection antisurchauffe des zones sont activées. Éteignez la table de cuisson. Enlevez le récipient chaud. Au bout d'environ 30 secondes, remettez la zone de cuisson en fonctionnement. Si le récipient était bien le problème, le message d'erreur disparaît. Le voyant de chaleur résiduelle peut rester allumé.
www.aeg.com ATTENTION! Ne percez et ne soudez jamais les extrémités des fils. Cela est strictement interdit ! ATTENTION! Ne raccordez pas le câble sans gaine à l'extrémité. Raccordement biphasé 1. Retirez le câble et la gaine des fils noir et marron. 2. Dénudez les extrémités des fils noir et marron. 3. Appliquez un nouvelle gaine de 1,5 mm² à chaque extrémité du câble. (nécessite un outil spécial).
FRANÇAIS min. 2 mm A min. 2 mm B < 20 mm B > 20 mm min. 500 mm min 30 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm A min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min. 55mm +1 490+1mm 750 mm min. 12 mm min.
www.aeg.com 8.5 Enceinte de protection Si vous utilisez une enceinte de protection (accessoire supplémentaire), l'espace de circulation d'air de 2 mm et le fond de protection installé directement sous la table de cuisson ne sont plus nécessaires. L'enceinte de protection n'est pas disponible dans tous les pays. Veuillez contacter votre revendeur local. Vous ne pouvez pas utiliser l'enceinte de protection si vous installez la table de cuisson au-dessus d'un four. 9. CARACTÉRISTIQUES TECHNIQUES 9.
FRANÇAIS 45 10. RENDEMENT ÉNERGÉTIQUE 10.
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE.........................................................................................47 2. SICHERHEITSANWEISUNGEN.............................................................................. 49 3. GERÄTEBESCHREIBUNG.......................................................................................51 4. TÄGLICHER GEBRAUCH........................................................................................53 5. TIPPS UND HINWEISE...........
DEUTSCH 1. 47 SICHERHEITSHINWEISE Lesen Sie die mitgelieferte Gebrauchsanleitung sorgfältig vor Montage und Inbetriebnahme des Geräts. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com • • • • • • • • • • • Gerät fern, wenn sie nicht ständig beaufsichtigt werden. Schalten Sie das Gerät nicht über eine externe Zeitschaltuhr oder eine separate Fernsteuerung ein. WARNUNG: Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. Versuchen Sie NIEMALS einen Brand mit Wasser zu löschen, sondern schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke.
DEUTSCH 49 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Nur eine qualifizierte Fachkraft darf die Montage des Geräts vornehmen. • Entfernen Sie das gesamte Verpackungsmaterial. • Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht. • Halten Sie sich an die mitgelieferte Montageanleitung. • Die Mindestabstände zu anderen Geräten und Küchenmöbeln sind einzuhalten. • Gehen Sie beim Umsetzen des Geräts vorsichtig vor, da es schwer ist. Tragen Sie stets Schutzhandschuhe und feste Schuhe.
www.aeg.com • • • • • werden, dass sie nicht ohne Werkzeug entfernt werden können. Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. Falls die Steckdose lose ist, schließen Sie den Netzstecker nicht an. Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät vom Netzstrom trennen möchten. Ziehen Sie stets am Netzstecker.
DEUTSCH • Legen Sie keine Alufolie auf das Gerät. • Kochgeschirr aus Gusseisen, Aluminium oder mit beschädigten Böden kann die Glas- bzw. Glaskeramikoberfläche verkratzen. Heben Sie das Kochgeschirr stets an, wenn Sie es auf dem Kochfeld umsetzen möchten. • Dieses Gerät ist nur zum Kochen bestimmt. Jeder andere Gebrauch ist als bestimmungsfremd anzusehen, zum Beispiel das Beheizen eines Raums. 2.
www.aeg.com 3.2 Bedienfeldanordnung 1 2 3 4 11 5 6 10 9 7 8 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen. SenFunktion sorfeld Kommentar 1 EIN/AUS Ein- und Ausschalten des Kochfeldes. 2 Verriegeln / Kindersicherung Verriegeln/Entriegeln des Bedienfelds. 3 STOP+GO Ein- und Ausschalten der Funktion. - Kochstufenanzeige Zeigt die Kochstufe an.
DEUTSCH Display 53 Beschreibung Die Funktion STOP+GO ist in Betrieb. Die Funktion Ankochautomatik ist in Betrieb. Power-Funktion ist eingeschaltet. + Zahl Eine Störung ist aufgetreten. / OptiHeat Control (Restwärmeanzeige, 3-stufig): Weitergaren/Warmhalten/Restwärme. / Die Funktion Verriegeln/Kindersicherung ist in Betrieb. Das Kochgeschirr ist ungeeignet oder zu klein bzw. es befindet sich kein Kochgeschirr auf der Kochzone. Die Funktion Abschaltautomatik ist in Betrieb. 3.
www.aeg.com Verhältnis zwischen der Kochstufe und der Zeit, nach der das Kochfeld ausgeschaltet wird: Kochstufe Das Kochfeld wird ausgeschaltet nach Leistung zur Verfügung. Für die Induktionskochzone kann diese Funktion nur für einen begrenzten Zeitraum eingeschaltet werden. Danach schaltet die Induktionskochzone automatisch wieder auf die höchste Kochstufe um. 6 Stunden Siehe Kapitel „Technische Daten“.
DEUTSCH Wenn die eingestellte Zeit abgelaufen ist, ertönt ein Signalton und 00 blinkt. Die Kochzone wird ausgeschaltet. Ausschalten des Signaltons: Berühren Sie . CountUp Timer (Garzeitmesser) Mit dieser Funktion können Sie feststellen, wie lange eine Kochzone bereits in Betrieb ist. Auswählen der Kochzone:Berühren Sie so oft, bis die Anzeige der gewünschten Kochzone aufleuchtet. 55 4.7 STOP+GO Mit dieser Funktion werden alle eingeschalteten Kochzonen auf die niedrigste Kochstufe geschaltet.
www.aeg.com Vorübergehendes Ausschalten der Funktion für einen einzelnen Kochvorgang: Schalten Sie das Kochfeld mit ein. leuchtet auf. Berühren Sie 4 Sekunden lang. Stellen Sie die Kochstufe innerhalb von 10 Sekunden ein. Das Kochfeld kann jetzt benutzt werden. Wenn Sie das Kochfeld mit ausschalten, wird diese Funktion wieder eingeschaltet. 4.10 OffSound Control (Einund Ausschalten der Signaltöne) Schalten Sie das Kochfeld aus. Berühren Sie 3 Sekunden lang.
DEUTSCH 57 Automatikbetrieb der Funktion Stellen Sie für den automatischen Betrieb den Modus auf H1 – H6. Das Kochfeld ist standardmäßig auf H5 gestellt.Die Dunstabzugshaube schaltet sich ein, wenn Sie das Kochfeld bedienen. Das Kochfeld misst die Temperatur des Kochgeschirrs automatisch und passt die Geschwindigkeit des Lüfters an.
www.aeg.com 2. Berühren Sie 3 Sekunden lang. Das Display wird ein- und ausgeschaltet 3. Berühren Sie 3 Sekunden lang. das Kochfeld eingeschaltet ist. Auf diese Weise wird der Automatikbetrieb ausgeschaltet und Sie können die Lüftergeschwindigkeit manuell ändern. wiederholt, bis 4. Berühren Sie angezeigt wird. Durch Drücken von erhöht sich die Lüftergeschwindigkeit um eine Stufe. Wenn Sie die Intensivstufe gewählt 5. Berühren Sie des Timers, um einen automatischen Modus auszuwählen.
DEUTSCH Induktionskochzonen passen sich der Größe des Geschirrbodens bis zu einer bestimmten Grenze automatisch an. Die Kochzoneneffizienz hängt vom Durchmesser des Kochgeschirrs ab. An Kochgeschirr mit einem kleineren Durchmesser als der Mindestdurchmesser gelangt nur ein Teil der von der Kochzone erzeugten Hitze. Siehe Kapitel „Technische Daten“. 5.2 Betriebsgeräusche Es gibt verschiedene Betriebsgeräusche: • Knacken: Das Kochgeschirr besteht aus unterschiedlichen Materialien (Sandwichkonstruktion).
www.aeg.com Kochstufe Verwendung: Dauer (Min.) Hinweise 7-9 Kochen größerer Speisemengen, Eintopfgerichte und Suppen. 60 - 150 Bis zu 3 l Flüssigkeit plus Zutaten. 9 - 12 Bei geringer Hitze anbraten: Schnitzel, Cordon bleu, Kotelett, Frikadellen, Bratwürste, Leber, Mehlschwitze, Eier, Pfannkuchen, Donuts. Nach Bedarf Nach der Hälfte der Zeit wenden. 12 - 13 Braten bei starker Hitze: Rösti, Lendenstücke, Steaks. 5 - 15 Nach der Hälfte der Zeit wenden.
DEUTSCH 61 Funktion ausgestattet sind, sind mit dem Symbol gekennzeichnet. 6. REINIGUNG UND PFLEGE WARNUNG! Siehe Kapitel "Sicherheitshinweise". 6.1 Allgemeine Informationen • Reinigen Sie das Kochfeld nach jedem Gebrauch. • Achten Sie immer darauf, dass der Boden des Kochgeschirrs sauber ist. • Kratzer oder dunkle Flecken auf der Oberfläche beeinträchtigen die Funktionsfähigkeit des Kochfelds nicht. • Verwenden Sie einen Spezialreiniger zur Reinigung der Kochfeldoberfläche.
www.aeg.com Störung Mögliche Ursache Abhilfe Die Sicherung ist durchgebrannt. Vergewissern Sie sich, dass die Sicherung der Grund für die Störung ist. Brennt die Sicherung wiederholt durch, wenden Sie sich an eine zugelassene Elektrofachkraft. Schalten Sie das Kochfeld erneut ein und stellen Sie innerhalb von 10 Sekunden die Kochstufe ein. Zwei oder mehr Sensorfelder Berühren Sie nur ein Sensorwurden gleichzeitig berührt. feld. Die Funktion STOP+GO ist in Betrieb.
DEUTSCH 63 Störung Mögliche Ursache Abhilfe Die Sensorfelder werden heiß. Das Kochgeschirr ist zu Stellen Sie großes Kochgegroß, oder Sie haben es zu schirr nach Möglichkeit auf nahe an die Bedienelemente die hinteren Kochzonen. gestellt. Es ertönt kein Signalton, wenn Sie die Sensorfelder des Bedienfelds berühren. Der Signalton ist ausgeschal- Schalten Sie den Signalton tet. ein. Siehe Kapitel „Täglicher Gebrauch“. leuchtet auf. Die Abschaltautomatik hat ausgelöst.
www.aeg.com Störung leuchtet auf. Mögliche Ursache Abhilfe Im Kochfeld ist ein Fehler aufgetreten, da ein Kochgeschirr leer gekocht ist. Die Abschaltautomatik und der Überhitzungsschutz für die Zonen sind aktiviert. Schalten Sie das Kochfeld aus. Entfernen Sie das heiße Kochgeschirr. Schalten Sie die Kochzone nach etwa 30 Sekunden wieder ein. War das Kochgeschirr die Ursache des Problems, erlischt die Fehlermeldung. Die Restwärmeanzeige leuchtet eventuell weiter.
DEUTSCH VORSICHT! Schließen Sie das Kabel nicht ohne Aderendhülse an. Zweiphasiger Anschluss 1. Entfernen Sie die Aderendhülsen des schwarzen und braunen Kabels. 2. Isolieren Sie die Enden des braunen und schwarzen Kabels ab. 3. Bringen Sie eine neue Aderendhülse von 1,5 mm² an jedem Kabelende an. (Es wird ein Spezialwerkzeug benötigt.
www.aeg.com min. 2 mm A min. 2 mm B < 20 mm B > 20 mm min. 500 mm min 30 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm A min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min. 55mm +1 490+1mm 750 mm min. 12 mm min.
DEUTSCH 8.5 Schutzboden 67 Falls Sie einen Schutzboden (optionales Zubehör) verwenden, ist die Einhaltung des vorderen Belüftungsabstands von 2 mm und die Schutzmatte direkt unter dem Gerät nicht nötig. Der Schutzboden ist möglicherweise in einigen Ländern nicht erhältlich. Wenden Sie sich an Ihren Händler vor Ort. Wenn Sie das Kochfeld über einem Backofen einsetzen, können Sie den Schutzboden nicht verwenden. 9. TECHNISCHE DATEN 9.1 Typenschild Modell HK8542H1XB Typ 60 GBD C1 AT Induktion 7.2 kW Ser.
www.aeg.com 10. ENERGIEEFFIZIENZ 10.
DEUTSCH 69
www.aeg.
DEUTSCH 71
867328972-A-322016 www.aeg.