EN User Manual Hob HK855200FB
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 6 4. DAILY USE...................................................................................................................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • • • Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector. If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.
ENGLISH • Make sure that a shock protection is installed. • Use the strain relief clamp on the cable. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
www.aeg.com • Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. 2.4 Care and cleaning • Clean regularly the appliance to prevent the deterioration of the surface material. • Deactivate the appliance and let it cool down before you clean it.
ENGLISH 7 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 ON / OFF 2 Lock / The Child Safety De- To lock / unlock the control panel. vice 3 STOP+GO To activate and deactivate the function. - Heat setting display To show the heat setting. - Timer indicators of cooking To show for which zone you set the time. zones - Timer display To show the time in minutes. - To select the cooking zone.
www.aeg.com 3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 4. DAILY USE WARNING! Refer to Safety chapters. 4.1 Activating and deactivating Touch for 1 second to activate or deactivate the hob. 4.
ENGLISH 4.5 Automatic Heat Up To see the remaining time: set the If you activate this function you can get a necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting. cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. To activate the function the cooking zone must be cold. To activate the function for a cooking zone: touch ( comes on).
www.aeg.com To stop the sound: touch To override the function for only one . cooking time: activate the hob with The function has no effect on the operation of the cooking zones. comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you 4.8 STOP+GO This function sets all cooking zones that operate to the lowest heat setting. When the function operates, you cannot change the heat setting. The function does not stop the timer functions.
ENGLISH 11 5. HINTS AND TIPS WARNING! Refer to Safety chapters. 5.1 Cookware For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with correct cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain.
www.aeg.com the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. Heat setting The data in the table is for guidance only. Use to: Time (min) Hints Keep cooked food warm. as necessary Put a lid on the cookware. 1-3 Hollandaise sauce, melt: butter, chocolate, gelatine. 5 - 25 Mix from time to time. 1-3 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.
ENGLISH surface at an acute angle and move the blade on the surface. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. 13 Clean the hob with a moist cloth and non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth. 7. TROUBLESHOOTING WARNING! Refer to Safety chapters. 7.1 What to do if... Problem Possible cause You cannot activate or oper- The hob is not connected to ate the hob.
www.aeg.com Problem Possible cause Remedy The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels. Power management function Refer to "Daily use" chapter. operates. The sensor fields become hot. The cookware is too large or Put large cookware on the you put it too near to the rear zones if possible. controls. There is no signal when you touch the panel sensor fields. The signals are deactivated.
ENGLISH Problem comes on. 15 Possible cause Remedy There is an error in the hob because a cookware boils dry. Automatic Switch Off and the overheating protection for the zones operate. Deactivate the hob. Remove the hot cookware. After approximately 30 seconds, activate the zone again. If the cookware was the problem, the error message goes out. Residual heat indicator can stay on. Let the cookware become sufficiently cool. Check if your cookware is compatible with the hob.
www.aeg.com 8.4 Assembly min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm B < 20 mm B > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm A min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
ENGLISH 17 min. 12 mm min. 2 mm 9. TECHNICAL INFORMATION 9.1 Rating plate Modell HK855200FB Typ 58 GBD CM AU Induction 7.4 kW Ser.Nr. ................. AEG PNC 949 595 454 00 220 - 240 V 50 - 60 Hz Made in Germany 7.4 kW 9.
www.aeg.com 10. ENERGY EFFICIENCY 10.1 Product information according to EU 66/2014 Model identification HK855200FB Type of hob Built-In Hob Number of cooking zones 5 Heating technology Induction Diameter of circular cooking zones (Ø) Left front Left rear Middle front Right front Right rear 14.5 cm 21.0 cm 21.0 cm 14.5 cm 21.0 cm Energy consumption per cooking zone (ECelectric cooking) Left front Left rear Middle front Right front Right rear 172.8 Wh / kg 165.2 Wh / kg 175.5 Wh / kg 176.
ENGLISH 19
867327062-A-342015 www.aeg.
