Operation Manual

Automatic Switch Off times

Heat setting

1-3 4-6 7-8 9-14

Stops after

6 hours 5 hours 4 hours 1.5 hours

Language choice

To change the language, start the appliance with and than touch OK . Select with arrows

the language menu. Touch OK to confirm. The display shows the list of languages. Touch

or to set the language. Touch OK to confirm.

The heat setting

Touch the control bar at the necessary heat set-

ting. Change up or down, if it is necessary. Do not

release before you have a correct heat setting. The

display shows the heat setting and the counter

starts.

Automatic Heat Up

1234567891011121314

You can get a necessary heat setting in a shorter time if you activate the Automatic Heat

Up function. This function sets the highest heat setting for some time (see the graphic),

and then decreases to the necessary heat setting.

To start the Automatic Heat Up function for a cooking zone:

1. Touch

( in the circle comes on in the display).

Immediately touche the necessary heat setting. After 3 seconds A in the circle comes

on in the display.

To stop the function change the heat setting.

Operating instructions