HK973500FB DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. SICHERHEITSINFORMATIONEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 TÄGLICHER GEBRAUCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 3 1. SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und Verwendung des Geräts sorgfältig die mitgelieferte Anleitung. Der Hersteller haftet nicht für Verletzungen oder Schäden, die durch eine fehlerhafte Montage entstehen. Bewahren Sie die Anleitung zum Nachschlagen auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, das Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com • Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. • Versuchen Sie nicht einen Brand mit Wasser zu löschen, sondern schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke. • Legen Sie keine Gegenstände auf dem Kochfeld ab. • Benutzen Sie zum Reinigen des Gerätes keinen Dampfreiniger.
DEUTSCH entstehen, sind von der Garantie ausgenommen. • Der Boden des Geräts kann heiß werden. Wir empfehlen eine feuerfeste Trennplatte unter dem Gerät anzubringen, damit der Boden nicht zugänglich ist. Elektrischer Anschluss WARNUNG! Brand- und Stromschlaggefahr. • Die elektrischen Anschlüsse müssen von einem qualifizierten Elektriker ausgeführt werden. • Das Gerät muss geerdet sein. • Vor der Durchführung jeglicher Arbeiten muss das Gerät von der elektrischen Stromversorgung getrennt werden.
www.aeg.com bei niedrigeren Temperaturen als frisches Öl verursachen. • Platzieren Sie keine entflammbaren Produkte oder Gegenstände, die mit entflammbaren Produkten benetzt sind, im Gerät, auf dem Gerät oder in der Nähe des Geräts. • Löschen Sie eine Flamme nicht mit Wasser. Schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke. WARNUNG! Das Gerät könnte beschädigt werden. • Stellen Sie kein heißes Kochgeschirr auf das Bedienfeld.
DEUTSCH 1 2 10 4 3 9 8 7 5 7 6 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen. Sensorfeld Funktion Ein- und Ausschalten der Funktion STOP+GO. 1 2 Anzeige der Kochstufe Zeigt die Kochstufe an. 3 Timer-Anzeige Zeigt die Zeit in Minuten an. 4 Kochzonen-Anzeige des Timers. Zeigt an, für welche Kochzone die Zeit eingestellt wird. 5 Verriegeln/Entriegeln des Bedienfelds.
www.aeg.com Display Beschreibung Die Abschaltautomatik ist in Betrieb. 3.3 OptiHeat Control (Restwärmeanzeige, 3-stufig) WARNUNG! \ \ Es besteht Verbrennungsgefahr durch Restwärme! OptiHeat Control zeigt die Restwärmestufe an. Die Induktionskochzonen erzeugen die erforderliche Hitze zum Kochen direkt im Boden des Kochgeschirrs. Die Glaskeramik wird nur durch die Wärme des Kochgeschirrs erhitzt. 4. TÄGLICHER GEBRAUCH 4.
DEUTSCH 9 (siehe Diagramm) eingestellt und anschließend auf die erforderliche Stufe zurückgeschaltet. So schalten Sie die Ankochautomatik für eine Kochzone ein: 1. Berühren Sie ( erscheint auf dem Display). 2. Berühren Sie dann gleich danach die gewünschte Kochstufe. Nach 5 Sekunden leuchtet auf dem Display. Ändern Sie die Kochstufe, um die Funktion abzuschalten. 4.7 Uhr Kurzzeitmesser 12 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 4.
www.aeg.com CountUp Timer (Garzeitmesser) Benutzen Sie die Funktion CountUp Timer, um festzustellen, wie lange die Kochzone bereits in Betrieb ist. • Auswählen der Kochzone (wenn mehr als 1 Kochzone in Betrieb ist): so oft, bis die AnzeiBerühren Sie ge der gewünschten Kochzone aufleuchtet. • So schalten Sie den CountUp Timer ein: Berühren Sie des Timers. leuchtet auf. Wenn die Anzeige der Kochzone langsamer blinkt, wird die Zeit hochgezählt.
DEUTSCH 4.11 OffSound Control (Aktivierung und Deaktivierung des Signaltons) Deaktivieren des Signaltons Schalten Sie das Gerät aus. Berühren Sie 3 Sekunden lang. Die Anzeigen leuchten auf und erlöschen. Berühren Sie 3 Sekunden lang. leuchtet und der Signalton ist aktiviert. Berühren Sie , leuchtet auf, der Signalton ist deaktiviert.
www.aeg.com • Summen: Sie haben Kochzonen auf eine hohe Stufe geschaltet. • Klicken: Bei elektronischen Schaltvorgängen. • Zischen, Surren: Das Gebläse läuft. Die beschriebenen Geräusche sind normal und weisen nicht auf einen Defekt hin. 5.4 Energiesparen So sparen Sie Energie • Decken Sie Kochgeschirr, wenn möglich, mit einem Deckel ab. • Setzen Sie das Kochgeschirr vor dem Einschalten der Kochzone auf. • Nutzen Sie die Restwärme, um die Speisen warm zu halten oder zu schmelzen.
DEUTSCH Ko Verwendung: chs tufe Zeit Tipps Nennleistungsaufnahme 79 Dampfgaren von Kartoffeln 20 - 60 Min. Max. ¼ l Wasser für 750 g Kartoffeln verwenden 18 – 25 % 79 Kochen größerer Spei- 60 - 150 semengen, Eintopfge- Min. richte und Suppen Bis zu 3 l Flüssigkeit plus Zutaten 18 – 25 % 912 Bei geringer Hitze anbraten: Schnitzel, Cordon bleu, Koteletts, Frikadellen, Bratwürste, Leber, Mehlschwitze, Eier, Pfannkuchen, Donuts Nach Bedarf Nach der Hälfte der Zeit wenden 25 – 45 % 5 - 15 Min.
www.aeg.com 7. FEHLERSUCHE Problem Mögliche Ursache Das Gerät kann nicht eingeschaltet oder bedient werden. Abhilfe Schalten Sie das Gerät erneut ein und stellen Sie innerhalb von 10 Sekunden die Kochstufe ein. Zwei oder mehr Sensorfelder wurden gleichzeitig berührt. Berühren Sie nur ein Sensorfeld. Die Funktion STOP+GO ist eingeschaltet. Siehe hierzu Kapitel „Täglicher Gebrauch“. Wasser- oder Fettspritzer Wischen Sie das Bedienbefinden sich auf dem feld ab. Bedienfeld.
DEUTSCH Problem Mögliche Ursache 15 Abhilfe leuchtet auf. Die Abschaltautomatik hat ausgelöst. Schalten Sie das Gerät aus und wieder ein. leuchtet auf. Die Kindersicherung Siehe hierzu Kapitel oder die Tastenverriege- „Täglicher Gebrauch“. lung ist eingeschaltet. leuchtet auf. Es befindet sich kein Kochgeschirr auf der Kochzone. Stellen Sie Kochgeschirr auf die Kochzone. Sie verwenden ungeeignetes Kochgeschirr. Verwenden Sie geeignetes Kochgeschirr.
www.aeg.com Problem Mögliche Ursache Abhilfe leuchtet auf. Im Gerät ist ein Fehler aufgetreten, da ein Kochgeschirr leer gekocht ist. Der Überhitzungsschutz der Kochzonen und die Abschaltautomatik sind eingeschaltet. Schalten Sie das Gerät aus. Das heiße Kochgeschirr entfernen. Schalten Sie die Kochzone nach etwa 30 Sekunden wieder ein. Lag das Problem am Kochgeschirr, erlischt die Fehlermeldung auf dem Display, aber die Restwärmeanzeige kann weiterhin leuchten.
DEUTSCH 17 8.1 Einbaugeräte 8.3 Anbringen der Dichtung. • Einbaugeräte dürfen nur nach dem Einbau in bzw. unter normgerechte, passende Einbauschränke und Arbeitsplatten betrieben werden. • Reinigen Sie die Arbeitsplatte im Ausschnittbereich. • Kleben Sie das mitgelieferte Dichtungsband umlaufend auf der Unterseite des Geräts entlang des äußeren Randes der Glaskeramikscheibe auf. Dehnen Sie es nicht. Die Schnittstelle muss in der Mitte einer Seite liegen.
www.aeg.com min. 12 mm min. 2 mm R 5 mm min. 55mm 380+1 mm 880 +1 mm min. 38 mm min. 2 mm 9. TECHNISCHE DATEN Modell HK973500FB Prod.Nr. 949 595 266 00 Typ 58 GCD E2 AU 220 - 240 V 50 - 60 Hz Induction 6.9 kW Made in Germany Ser.Nr. .......... 6.
DEUTSCH 19 Kochzonenleistung Kochzone Nennleistung Power-Funk(höchste tion eingeKochstufe) schaltet [W] [W] Max. Einschaltdauer der PowerFunktion [Min.] Min. Kochgeschirrdurchmesser [mm] Rechts – 210 mm 2300 W 3200 W 10 125 Mitte – 210 mm 2300 W 3200 W 10 125 Links – 210 mm 2300 W 3200 W 10 125 Die Leistung der Kochzonen kann geringfügig von den Daten in der Tabelle abweichen. Sie ändert sich je nach Mate- rial und Abmessungen des Kochgeschirrs. 10.
892955398-A-412012 www.aeg.