HKL65410FB EN FR DE USER MANUAL User Manual Hob Notice d'utilisation Table de cuisson Benutzerinformation Kochfeld 2 22 45
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 3 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION...........................................................................................7 4. DAILY USE.................................................................................................................... 9 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • • • • • WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces.
ENGLISH • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened. • If the appliance is installed above drawers make sure that the space, between the bottom of the appliance and the upper drawer, is sufficient for air circulation. • The bottom of the appliance can get hot.
www.aeg.com • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface. • If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.
ENGLISH 7 3. PRODUCT DESCRIPTION 3.1 Cooking surface layout 1 1 1 Induction cooking zone 2 Control panel 180 mm 1 145 mm 1 2 3.2 Control panel layout 1 2 3 4 5 12 6 7 11 10 8 9 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 ON / OFF 2 Lock / The Child Safety De- To lock / unlock the control panel. vice 3 STOP+GO To activate and deactivate the function.
www.aeg.com Sensor Function field 8 9 / 10 11 12 - Comment Hob²Hood To activate and deactivate the manual mode of the function. - To select the cooking zone. - To increase or decrease the time. Power function To activate and deactivate the function. Control bar To set a heat setting. 3.3 Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - STOP+GO function operates. Automatic Heat Up function operates. Power function operates.
ENGLISH 9 4. DAILY USE WARNING! Refer to Safety chapters. 4.1 Activating and deactivating Touch the control bar at the correct heat setting or move your finger along the control bar until you reach the correct heat setting. Touch for 1 second to activate or deactivate the hob. 4.
www.aeg.com setting in the beginning and then continues to cook at the desired heating setting. To activate the function the cooking zone must be cold. To activate the function for a cooking ( comes on). zone: touch Immediately touch a desired heat setting. After 3 seconds comes on. To deactivate the function: change the heat setting. 4.7 Power function This function makes more power available to the induction cooking zones.
ENGLISH 11 comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you The function has no effect on the operation of the cooking zones. deactivate the hob with operates again. 4.9 STOP+GO This function sets all cooking zones that operate to the lowest heat setting. the function When the function operates, you cannot change the heat setting. 4.12 OffSound Control (Deactivating and activating the sounds) The function does not stop the timer functions.
www.aeg.com Automatic light 4.14 Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. For most of the hoods the remote system is originally deactivated. Activate it before you use the function.
ENGLISH you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed 1 touch . To activate automatic operation of the function, deactivate the hob and activate it again. 13 Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6.
www.aeg.com consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. Heat setting The data in the table is for guidance only. Use to: Time (min) Hints Keep cooked food warm. as necessary Put a lid on the cookware. 1-3 Hollandaise sauce, melt: butter, chocolate, gelatine. 5 - 25 Mix from time to time. 1-3 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.
ENGLISH 15 Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol . It may happen that other remote controlled appliances may block the signal. To avoid it do not operate the remote of the appliance and the hob at the same time. 6. CARE AND CLEANING WARNING! Refer to Safety chapters. 6.1 General information • Clean the hob after each use.
www.aeg.com 7.1 What to do if... Problem Possible cause You cannot activate or oper- The hob is not connected to ate the hob. an electrical supply or it is connected incorrectly. The fuse is blown. Remedy Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Activate the hob again and set the heat setting in less than 10 seconds.
ENGLISH 17 Problem Possible cause The sensor fields become hot. The cookware is too large or Put large cookware on the you put it too near to the rear zones if possible. controls. There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals. Refer to "Daily use" chapter. comes on. Automatic Switch Off operates. Deactivate the hob and activate it again. comes on. The Child Safety Device or the Lock function operates. Refer to "Daily use" chapter.
www.aeg.com 7.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period.
ENGLISH min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm min 30 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min. 55mm 490+1mm 560+1mm min. 12 mm min.
www.aeg.com 8.5 Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. 9. TECHNICAL DATA 9.1 Rating plate Model HKL65410FB Typ 60 GAD DC AU Induction 7.4 kW Ser.Nr. .................
ENGLISH 21 10. ENERGY EFFICIENCY 10.1 Product information according to EU 66/2014 Model identification HKL65410FB Type of hob Built-In Hob Number of cooking zones 4 Heating technology Induction Diameter of circular cooking zones (Ø) Left front Left rear Right front Right rear 21.0 cm 21.0 cm 14.5 cm 18.0 cm Energy consumption per cooking zone (EC electric cooking) Left front Left rear Right front Right rear 168.6 Wh / kg 176.3 Wh / kg 178.1 Wh / kg 170.
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ...............................................................................23 2. CONSIGNES DE SÉCURITÉ......................................................................................25 3. DESCRIPTION DE L'APPAREIL.................................................................................27 4. UTILISATION QUOTIDIENNE.................................................................................. 29 5. CONSEILS...................
FRANÇAIS 1. 23 INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • • tenus à l'écart, à moins d'être surveillés en permanence. Ne faites pas fonctionner l'appareil avec un minuteur externe ou un système de commande à distance. AVERTISSEMENT : Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau.
FRANÇAIS 25 2. CONSIGNES DE SÉCURITÉ 2.1 Installation AVERTISSEMENT! L'appareil doit être installé uniquement par un professionnel qualifié. AVERTISSEMENT! Risque de blessure corporelle ou de dommages matériels. • Retirez l'intégralité de l'emballage. • N'installez pas et ne branchez pas un appareil endommagé. • Suivez scrupuleusement les instructions d'installation fournies avec l'appareil. • Respectez l'espacement minimal requis par rapport aux autres appareils et éléments.
www.aeg.com • Si la prise de courant est lâche, ne branchez pas la fiche d'alimentation secteur. • Ne tirez jamais sur le câble d'alimentation pour débrancher l'appareil. Tirez toujours sur la fiche. • N'utilisez que des systèmes d'isolation appropriés : des coupecircuits, des fusibles (les fusibles à visser doivent être retirés du support), un disjoncteur différentiel et des contacteurs. • L'installation électrique doit être équipée d'un dispositif d'isolement à coupure omnipolaire.
FRANÇAIS Soulevez toujours ces objets lorsque vous devez les déplacer sur la surface de cuisson. • Cet appareil est exclusivement destiné à un usage culinaire. Ne l'utilisez pas pour des usages autres que celui pour lequel il a été conçu, à des fins de chauffage par exemple. des produits de lavage neutres. N'utilisez pas de produits abrasifs, de tampons à récurer, de solvants ni d'objets métalliques. 2.5 Mise au rebut AVERTISSEMENT! Risque de blessure ou d'asphyxie. 2.
www.aeg.com 3.2 Description du bandeau de commande 1 2 3 4 5 12 6 7 11 10 8 9 Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. TouFonction che sensitive Commentaire 1 MARCHE/ARRÊT 2 Verrouillage / Dispositif de Pour verrouiller ou déverrouiller le bandeau sécurité enfants de commande. 3 STOP+GO Pour activer et désactiver la fonction.
FRANÇAIS 29 3.3 Indicateurs de niveau de cuisson Affichage Description La zone de cuisson est désactivée. La zone de cuisson est activée. - La fonction STOP+GO est activée. La fonction Démarrage automatique de la cuisson est activée. Fonction Booster est activée. + chiffre Une anomalie de fonctionnement s'est produite. / OptiHeat Control (Voyant de chaleur résiduelle à trois niveaux) : continuer la cuisson / maintien au chaud / chaleur résiduelle.
www.aeg.com • la table de cuisson surchauffe (par ex. lorsqu'un récipient chauffe à vide). Laissez refroidir la zone de cuisson avant de réutiliser la table de cuisson. • vous avez utilisé un récipient inadapté. Le symbole s'allume et la zone de cuisson se désactive automatiquement au bout de 2 minutes. • vous ne désactivez pas la zone de cuisson ou ne modifiez pas le niveau de cuisson. Au bout de quelques instants, s'allume et la table de cuisson s'éteint.
FRANÇAIS 31 4.7 Fonction Booster Pour désactiver la fonction : Cette fonction vous permet d'augmenter la puissance des zones de cuisson à induction. La fonction peut être activée pour la zone de cuisson à induction uniquement pour une durée limitée. Lorsque cette durée est écoulée, la zone de cuisson à induction revient automatiquement au niveau de cuisson le plus élevé. sélectionnez la zone de cuisson avec Reportez-vous au chapitre « Caractéristiques techniques ».
www.aeg.com minuteur pour régler la durée. Lorsque la durée s'est écoulée, un signal sonore retentit et 00 clignote. Pour arrêter le signal sonore : appuyez sur . Cette fonction est sans effet sur le fonctionnement des zones de cuisson. 4.9 STOP+GO Cette fonction sélectionne le niveau de cuisson le plus bas pour toutes les zones de cuisson activées. 4.11 Dispositif de sécurité enfants Cette fonction permet d'éviter une utilisation involontaire de la table de cuisson.
FRANÇAIS • • • • vous appuyez sur Minuterie se termine Minuteur dégressif se termine vous posez un objet sur le bandeau de commande. fonctionner manuellement le ventilateur de la table de cuisson. Sur la plupart des hottes, le système de commande à distance est désactivé par défaut. Activez-le avant d'utiliser cette fonction. Pour plus d'informations, reportez-vous au manuel d'utilisation de la hotte. 4.
www.aeg.com Éclaira- Faire Faire frige auto- bouillir1) re2) matique Mode H6 On Vitesse Vitesse du venti- du ventilateur 2 lateur 3 1) La table de cuisson détecte le processus Activation manuelle de la vitesse du ventilateur Vous pouvez également activer la fonction manuellement. Pour ce faire, appuyez sur la touche lorsque la table de cuisson est allumée. Cela désactive le fonctionnement automatique de la fonction et vous permet de modifier manuellement la vitesse du ventilateur.
FRANÇAIS 35 5. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 5.1 Ustensiles de cuisson Sur les zones de cuisson à induction, un champ électromagnétique puissant chauffe les récipients très rapidement. Utilisez des récipients adaptés aux zones de cuisson à induction. Matériaux des récipients • adaptés : fonte, acier, acier émaillé, acier inoxydable, fond multicouche (homologué par le fabricant). • inadaptés : aluminium, cuivre, laiton, verre, céramique, porcelaine.
www.aeg.com Niveau de cuisson Utilisation : Durée (min) Conseils Conservez les aliments cuits au au bechaud. soin Placez un couvercle sur le récipient. 1-3 Sauce hollandaise, faire fondre : beurre, chocolat, gélatine. 5 - 25 Mélangez de temps en temps. 1-3 Solidifier : omelettes, œufs cocotte. 10 - 40 Couvrez pendant la cuisson. 3-5 Faire mijoter des plats à base de riz et de laitage, réchauffer des plats cuisinés. 25 - 50 Ajoutez au moins deux fois plus d'eau que de riz.
FRANÇAIS 37 Hottes de cuisinière dotées de la fonction Hob²Hood Pour trouver la gamme complète des hottes qui sont dotées de cette fonction, consultez notre site web destiné aux consommateurs. Les hottes AEG qui sont dotées de cette fonction doivent avoir le symbole . Il peut arriver que d'autres appareils contrôlés à distance bloquent le signal. Pour éviter cela, ne faites pas fonctionner la commande à distance des autres appareils et la table de cuisson en même temps. 6.
www.aeg.com 7. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 7.1 En cas d'anomalie de fonctionnement Anomalie Cause possible Solution Vous ne pouvez pas mettre en fonctionnement la table de cuisson. La table de cuisson n'est pas connectée à une source d'alimentation électrique ou le branchement est incorrect. Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique.
FRANÇAIS 39 Anomalie Cause possible Solution La fonction Hob²Hood ne fonctionne pas. Vous avez couvert le bandeau de commande. Retirez l'objet du bandeau de commande. La fonction de démarrage automatique de la cuisson ne fonctionne pas. La zone est chaude. Laissez la zone refroidir suffisamment. Le niveau de cuisson le plus élevé est réglé. Le niveau de cuisson maximum offre la même puissance que la fonction. Le niveau de cuisson oscille entre deux niveaux.
www.aeg.com Anomalie s'affiche. Cause possible Solution Une erreur s'est produite dans la table de cuisson car un récipient a chauffé à vide. La fonction Arrêt automatique et la protection anti-surchauffe des zones sont activées. Éteignez la table de cuisson. Enlevez le récipient chaud. Au bout d'environ 30 secondes, remettez la zone en fonctionnement. Si le récipient était bien le problème, le message d'erreur disparaît. Le voyant de chaleur résiduelle peut rester allumé.
FRANÇAIS 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.aeg.com min. 12 mm min. 2 mm 8.5 Enceinte de protection Si vous utilisez une enceinte de protection (accessoire supplémentaire), l'espace de circulation d'air de 2 mm et le fond de protection installé directement sous la table de cuisson ne sont plus nécessaires. L'enceinte de protection n'est pas disponible dans tous les pays. Veuillez contacter votre revendeur local. Vous ne pouvez pas utiliser l'enceinte de protection si vous installez la table de cuisson au-dessus d'un four. 9.
FRANÇAIS 43 9.2 Caractéristiques des zones de cuisson Zone de cuisson Puissance noFonction Boosminale (réglage ter [W] de chaleur maximum) [W] Fonction Boos- Diamètre de ter durée maxi- l'ustensile de male [min] cuisson [mm] Avant gauche 2300 3200 10 125 - 210 Arrière gauche 2300 3200 10 125 - 210 Avant droite 1400 2500 4 125 - 145 Arrière droite 1800 2800 10 145 - 180 La puissance des zones de cuisson peut être légèrement différente des données indiquées par la table.
www.aeg.com • Si vous faites chauffer de l'eau, ne faites chauffer que la quantité dont vous avez réellement besoin. • Si possible, couvrez toujours les récipients de cuisson avec un couvercle pendant la cuisson. • Activez toujours la zone de cuisson après avoir posé le récipient dessus. • Placez les plus petits récipients sur les plus petites zones de cuisson. • Posez directement le récipient au centre de la zone de cuisson.
DEUTSCH 45 INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE........................................................................................... 46 2. SICHERHEITSANWEISUNGEN.................................................................................48 3. GERÄTEBESCHREIBUNG......................................................................................... 51 4. TÄGLICHER GEBRAUCH.......................................................................................... 53 5. TIPPS UND HINWEISE....
1. www.aeg.com SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
DEUTSCH • • • • • • • • • • • 47 Sie vorsichtig und berühren Sie niemals die Heizelemente. Halten Sie Kinder unter 8 Jahren vom Gerät fern, wenn sie nicht ständig beaufsichtigt werden. Schalten Sie das Gerät nicht über eine externe Zeitschaltuhr oder eine separate Fernsteuerung ein. WARNUNG: Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen.
www.aeg.com Schutzabdeckung. Es besteht Unfallgefahr durch die Verwendung ungeeigneter Schutzabdeckungen. 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Die Montage des Geräts darf nur von einer qualifizierten Fachkraft durchgeführt werden. WARNUNG! Verletzungsgefahr sowie Risiko von Schäden am Gerät. • Entfernen Sie das gesamte Verpackungsmaterial. • Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht. • Halten Sie sich an die mitgelieferte Montageanleitung.
DEUTSCH • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker (falls vorhanden) und Netzkabel nicht zu beschädigen. Wenden Sie sich zum Austausch des beschädigten Netzkabels an unseren autorisierten Kundendienst oder eine Elektrofachkraft. • Alle Teile, die gegen direktes Berühren schützen, sowie die isolierten Teile müssen so befestigt werden, dass sie nicht ohne Werkzeug entfernt werden können.
www.aeg.com • Legen Sie keine heißen Topfdeckel auf die Glasoberfläche des Kochfeldes. • Lassen Sie das Kochgeschirr nicht leerkochen. • Lassen Sie keine Gegenstände oder Kochgeschirr auf das Gerät fallen. Die Oberfläche könnte beschädigt werden. • Schalten Sie die Kochzonen niemals ein, wenn sich kein Kochgeschirr darauf befindet, oder wenn das Kochgeschirr leer ist. • Legen Sie keine Alufolie auf das Gerät. • Kochgeschirr aus Gusseisen, Aluminium oder mit beschädigten Böden kann die Glas- bzw.
DEUTSCH 3. GERÄTEBESCHREIBUNG 3.1 Kochfeldanordnung 1 1 1 Induktionskochzone 2 Bedienfeld 180 mm 1 145 mm 1 2 3.2 Bedienfeldanordnung 1 2 3 4 5 12 6 7 11 10 8 9 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen. SenFunktion sorfeld Kommentar 1 EIN/AUS Ein- und Ausschalten des Kochfeldes. 2 Verriegeln / Kindersicherung Verriegeln/Entriegeln des Bedienfelds.
www.aeg.com SenFunktion sorfeld 8 9 / 10 11 12 - Kommentar Hob²Hood Ein- und Ausschalten des manuellen Modus der Funktion. - Auswählen der Kochzone. - Erhöhen oder Verringern der Zeit. Power-Funktion Ein- und Ausschalten der Funktion. Einstellskala Einstellen der Kochstufe. 3.3 Anzeigen der Kochstufen Display Beschreibung Die Kochzone ist ausgeschaltet. Die Kochzone ist eingeschaltet. - Die Funktion STOP+GO ist in Betrieb. Die Funktion Ankochautomatik ist in Betrieb.
DEUTSCH 53 4. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel "Sicherheitshinweise". 4.1 Ein- und Ausschalten Berühren Sie 1 Sekunde lang, um das Kochfeld ein- oder auszuschalten. 4.2 Abschaltautomatik Mit dieser Funktion wird das Kochfeld in folgenden Fällen automatisch ausgeschaltet: • Alle Kochzonen sind ausgeschaltet. • Nach dem Einschalten des Kochfelds wird keine Kochstufe gewählt. • Das Bedienfeld ist mehr als 10 Sekunden mit verschütteten Lebensmitteln oder einem Gegenstand bedeckt (Topf, Tuch usw.).
www.aeg.com Einschalten der Funktion: Berühren Sie 4.8 Timer . Zum Einstellen oder Ändern der Kochstufe berühren Sie eine der Einstellskalen. Kurzzeitmesser Mit dieser Funktion stellen Sie ein, wie lange eine Kochzone für einen einzelnen Kochvorgang eingeschaltet bleiben soll. Ausschalten der Funktion: Berühren Sie . Die Kochzonen arbeiten wieder unabhängig voneinander. 4.
DEUTSCH 55 wird die Zeit hochgezählt. Das Display 4.10 Verriegeln schaltet um zwischen und der abgelaufenen Zeit (Minuten). Sie können das Bedienfeld sperren, wenn Kochzonen eingeschaltet sind. So wird verhindert, dass die Kochstufe versehentlich geändert wird. So können Sie feststellen, wie lange die Kochzone bereits in Betrieb ist: aus. Die Wählen Sie die Kochzone mit Anzeige der Kochzone blinkt schneller. Im Display wird die Einschaltdauer der Zone angezeigt.
www.aeg.com 4.12 OffSound Control (Einund Ausschalten der Signaltöne) Schalten Sie das Kochfeld aus. Berühren Sie 3 Sekunden lang. Das Display wird ein- und ausgeschaltet. Berühren Sie 3 Sekunden lang. Es wird angezeigt. Berühren Sie zum Auswählen von: • oder des Timers – der Signalton ist ausgeschaltet • – der Signalton ist eingeschaltet Ihre Einstellungen werden übernommen, sobald das Kochfeld automatisch ausgeschaltet wird.
DEUTSCH Automatikbetrieb Automa- Kotische chen1) Einschaltung der Beleuchtung Braten2) Modus H0 Aus Aus Aus Modus H1 Ein Aus Aus Modus Ein Lüfterge- Lüftergeschwinschwindigkeit 1 digkeit 1 Modus H3 Ein Aus Modus H4 Ein Lüfterge- Lüftergeschwinschwindigkeit 1 digkeit 1 Modus H5 Ein Lüfterge- Lüftergeschwinschwindigkeit 1 digkeit 2 Modus H6 Ein Lüfterge- Lüftergeschwinschwindigkeit 2 digkeit 3 H2 3) Lüftergeschwindigkeit 1 1) Das Kochfeld erkennt, dass gekocht wird und regelt die L
www.aeg.com 5. TIPPS UND HINWEISE WARNUNG! Siehe Kapitel "Sicherheitshinweise". 5.1 Kochgeschirr Das Kochgeschirr wird bei Induktionskochzonen durch ein starkes Magnetfeld sehr schnell erhitzt. Benutzen Sie für die Induktionskochzonen geeignetes Kochgeschirr. Kochgeschirrmaterial • Geeignet: Gusseisen, Stahl, emaillierter Stahl, Edelstahl, ein mehrlagiger Topfboden (wenn vom Hersteller als geeignet markiert). • Nicht geeignet: Aluminium, Kupfer, Messing, Glas, Keramik, Porzellan.
DEUTSCH Kochstufe 59 Verwendung: Dauer (Min.) Hinweise Warmhalten von gegarten Speisen. Nach Bedarf Legen Sie einen Deckel auf das Kochgeschirr. 1-3 Sauce Hollandaise, Schmelzen von: Butter, Schokolade, Gelatine. 5 - 25 Gelegentlich umrühren. 1-3 Stocken: Lockere Omeletts, gebackene Eier. 10 - 40 Mit Deckel garen. 3-5 Köcheln von Reis und Milchge- 25 - 50 richten, Erhitzen von Fertiggerichten. Mindestens doppelte Menge Flüssigkeit zum Reis geben, Milchgerichte zwischendurch umrühren.
www.aeg.com Dunstabzugshauben mit der Funktion Hob²Hood Die komplette Palette von Dunstabzugshauben, die mit dieser Funktion ausgestattet sind, finden Sie auf unserer Verbraucher-Website. Die AEG Dunstabzugshauben, die mit dieser Funktion ausgestattet sind, sind mit dem Symbol gekennzeichnet. Andere Geräte mit Fernbedienung können das Signal beeinträchtigen. Um dies zu vermeiden, die Fernbedienung des Gerätes und des Kochfelds nicht gleichzeitig verwenden. 6.
DEUTSCH 61 7. FEHLERSUCHE WARNUNG! Siehe Kapitel "Sicherheitshinweise". 7.1 Was tun, wenn ... Störung Mögliche Ursache Das Kochfeld kann nicht ein- Das Kochfeld ist nicht oder geschaltet oder bedient wer- nicht ordnungsgemäß an die den. Spannungsversorgung angeschlossen. Die Sicherung ist durchgebrannt. Abhilfe Prüfen Sie, ob das Kochfeld ordnungsgemäß an die Spannungsversorgung angeschlossen ist. Nehmen Sie dazu den Anschlussplan zu Hilfe.
www.aeg.com Störung Mögliche Ursache Abhilfe Die Funktion Hob²Hood wird Sie haben das Bedienfeld nicht ausgeführt. bedeckt. Entfernen Sie den Gegenstand vom Bedienfeld. Die Ankochautomatik startet Die Kochzone ist heiß. nicht. Lassen Sie die Kochzone lange genug abkühlen. Die höchste Kochstufe ist eingestellt. Die höchste Kochstufe hat die gleiche Leistung wie die Funktion. Die Kochstufe schaltet zwischen zwei Kochstufen hin und her. Die Power-ManagementFunktion ist eingeschaltet.
DEUTSCH Störung Mögliche Ursache 63 Abhilfe und eine Zahl werden an- Es ist ein Fehler im Kochfeld aufgetreten. gezeigt. Trennen Sie das Kochfeld eine Zeit lang vom Stromnetz. Schalten Sie die Sicherung im Sicherungskasten der Hausinstallation aus. Schalten Sie die Sicherung wieder ein. Wenn erneut aufleuchtet, wenden Sie sich an den autorisierten Kundendienst. leuchtet auf. Im Kochfeld ist ein Fehler aufgetreten, da ein Kochgeschirr leer gekocht ist.
www.aeg.com 8.2 Einbau-Kochfelder Einbau-Kochfelder dürfen nur nach dem Einbau in bzw. unter normgerechte, passende Einbauschränke und Arbeitsplatten betrieben werden. • Ersetzen Sie ein defektes Netzkabel durch ein Netzkabel des folgenden (oder eines höheren) Typs: H05V2V2-F T min 90 °C. Wenden Sie sich an den Kundendienst. 8.3 Anschlusskabel • Das Kochfeld wird mit einem Anschlusskabel geliefert. 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min.
DEUTSCH 65 min. 38 mm min. 2 mm R 5mm min. 55mm 490+1mm 560+1mm min. 12 mm min. 2 mm 8.5 Schutzboden Falls Sie einen Schutzboden (optionales Zubehör) verwenden, ist die Einhaltung des vorderen Belüftungsabstands von 2 mm und die Schutzmatte direkt unter dem Gerät nicht nötig. Der Schutzboden ist möglicherweise in einigen Ländern nicht erhältlich. Wenden Sie sich an Ihren Händler vor Ort. Wenn Sie das Kochfeld über einem Backofen einsetzen, können Sie den Schutzboden nicht verwenden.
www.aeg.com 9. TECHNISCHE DATEN 9.1 Typenschild Modell HKL65410FB Typ 60 GAD DC AU Induktion 7.4 kW Ser. Nr. .......... AEG Produkt-Nummer (PNC) 949 597 024 01 220 - 240 V, 50 - 60 Hz Made in Germany 7.4 kW 9.2 Technische Daten der Kochzonen Kochzone Nennleistung (höchste Kochstufe) [W] Power-Funktion Power-Funktion Durchmesser [W] maximale Eindes Kochgeschaltdauer schirrs [mm] [Min.
DEUTSCH Energieverbrauch des Kochfelds (EC electric hob) 67 173,4 Wh / kg EN 60350-2 - Elektrische Kochgeräte für den Hausgebrauch - Teil 2: Kochfelder Verfahren zur Messung der Gebrauchseigenschaften Die Energiemessungen der Kochflächen wurden an den Kreuzen der entsprechenden Kochzonen vorgenommen. 10.2 Energie sparen • Decken Sie Kochgeschirr, wenn möglich, mit einem Deckel ab. • Stellen Sie Kochgeschirr auf die Kochzone, bevor Sie sie einschalten.
867332415-A-372016 www.aeg.