EN User Manual Hob HKP65410FB
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 6 4. DAILY USE...................................................................................................................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • • • Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector. If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.
ENGLISH • Make sure that a shock protection is installed. • Use the strain relief clamp on the cable. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
www.aeg.com • Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. 2.4 Care and cleaning • Clean regularly the appliance to prevent the deterioration of the surface material. • Deactivate the appliance and let it cool down before you clean it.
ENGLISH 7 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / The Child Safety Device To lock / unlock the control panel. 3 ProCook To activate and deactivate the function. FlexiBridge To switch between three modes of the function. - Heat setting display To show the heat setting.
www.aeg.com Display Description Lock / The Child Safety Device function operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off function operates. / / ProCook function operates. 3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware.
ENGLISH 9 To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. 4.4 Automatic Heat Up If you activate this function you can get a necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting. To activate the function the cooking zone must be cold. To activate the function for a cooking zone: touch ( comes on). Immediately touch the correct heat setting.
www.aeg.com Minute Minder You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate (the can operate the hob. When you heat setting display shows 4.9 OffSound Control (Deactivation and activation of the sounds) deactivate the hob with operates again. ). To activate the function: touch . the function Touch or of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes. Deactivate the hob. Touch for 3 seconds.
ENGLISH Automatic light 4.11 Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to hood user manual.
www.aeg.com you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed 1 touch . To activate automatic operation of the function, deactivate the hob and activate it again. Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6.
ENGLISH > 160 mm 5.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones. You can set the heat setting for each zone separately. Use two left side control bars. Correct cookware position: 13 5.3 FlexiBridge Big Bridge mode To activate the mode press until you see the correct mode indicator. This mode connects three rear sections into one cooking zone.
www.aeg.com 5.4 FlexiBridge Max Bridge mode To activate the mode press until you see the correct mode indicator. This mode connects all sections into one cooking zone. To set the heat setting use one of the left side control bars. Correct cookware position: To use this mode you have to place the cookware on the four connected sections. If you use cookware smaller than three sections the display shows and after 2 minutes the zone switches off. 5.
ENGLISH 15 You can change the heat settings for each position separately. The hob will remember your heat settings next time you activate the function. Activating the function . To activate the function place the cookware in the correct position on the • Heat setting display for the left front control bar shows the heat setting. To change the heat setting use left front control bar.
www.aeg.com Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a smaller diameter than the minimum receives only a part of the power generated by the cooking zone. Refer to “Technical information” chapter. 6.2 The noises during operation If you can hear: • crack noise: cookware is made of different materials (sandwich construction).
ENGLISH Heat setting Use to: Time (min) Hints 9 - 12 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts. as necessary Turn halfway through. 12 - 13 Heavy fry, hash browns, loin steaks, steaks. 5 - 15 Turn halfway through. 14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips. 17 Boil large quantities of water. Power function is activated. 6.
www.aeg.com • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner applicable for the surface of the hob. • Use a special scraper for the glass. Put the special scraper on the glass surface at an acute angle and move the blade on the surface. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and non-abrasive detergent.
ENGLISH 19 Problem Possible cause Remedy Residual heat indicator does not come on. The zone is not hot because If the zone operated suffiit operated only for a short ciently long to be hot, speak time. to an Authorised Service Centre. Hob²Hood function does not You covered the control work. panel. Remove the object from the control panel. Automatic Heat Up function does not operate. The zone is hot. Let the zone become sufficiently cool. The highest heat setting is set.
www.aeg.com Problem comes on. and a number come on. Possible cause Remedy There is no cookware on the zone. Put cookware on the zone. The cookware is incorrect. Use the correct cookware. Refer to “Hints and tips” chapter. The diameter of the bottom of the cookware is too small for the zone. Use cookware with correct dimensions. Refer to “Technical information” chapter. FlexiBridge function operates. One or more sections of the function mode which operates are not covered by the cookware.
ENGLISH 8.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass 21 surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period.
www.aeg.com min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm min 30 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min. 55mm 490+1mm 560+1mm min. 12 mm min.
ENGLISH 23 10. TECHNICAL INFORMATION 10.1 Rating plate Modell HKP65410FB Typ 58 GAD CL AU Induction 7.4 kW Ser.Nr. ................. AEG PNC 949 597 078 01 220 - 240 V 50 - 60 Hz Made in Germany 7.4 kW 10.
www.aeg.com Energy consumption of the Left cooking area (EC electric cooking) 177.6 Wh / kg Energy consumption of the hob (EC electric hob) 175.2 Wh / kg EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance 11.2 Energy saving You can save energy during everyday cooking if you follow below hints. • When you heat up water, use only the amount you need. • If it is possible, always put the lids on the cookware.
ENGLISH 25
www.aeg.
ENGLISH 27
867327184-A-422015 www.aeg.