HM834080F-B User manual Ceramic glass hob
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.
Installation 3 Safety during operation • Remove all packaging, stickers and layers from the appliance before the first use. • Set the cooking zones to "off" after each use. • Risk of burns! Do not put cutlery or saucepan lids on the cooking surface, as they can become hot. WARNING! Fire danger! Overheated fats and oils can ignite very quickly. Correct operation • • • • Always monitor the appliance during operation.
Installation Safety instructions WARNING! You must read these! Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety regulations, recycling regulations, electrical safety rules etc.
Installation min.
Description of the appliance DESCRIPTION OF THE APPLIANCE Cooking surface layout 1 145 mm 2 145/210/270 265 mm 170 mm mm 120/180 mm 6 5 4 3 1 Single cooking zone 1200 W 2 Triple cooking zone 1050/1950/2700 W 3 Multi-purpose zone 1400/2200 W 4 Control panel 5 Double cooking zone 700/1700 W 6 Steam outlet
Description of the appliance Control panel layout 1 2 3 4 5 9 8 7 6 Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate.
Operating the appliance OptiHeat Control (3 step Residual heat indicator) WARNING! / / Risk of burns from residual heat! OptiHeat Control indicates the level of the residual heat. OPERATING THE APPLIANCE You operate the hob with the knobs of the appliance that you installed with the hob. The Operating Instructions chapter for this appliance tells how to operate the hob. When a cooking zone operates, it hums for a short time.
Operating the appliance 9 11 10 9 8 7 6 5 4 3 2 1 0 1 2 2. 3 3. 4 4. 5 5. 6 6. 7 8 Using the Timer Count Down Timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session. Set the Count Down Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. • Selection of the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on.
Operating the appliance • Stopping the CountUp Timer: select the cooking zone with and touch switch off the timer. The indicator of the cooking zone goes out. or to Minute Minder You can use the timer as a Minute Minder while cooking zones do not operate. Touch . Touch or of the timer to select the time. When the time elapses, the sound operates and 00 flashes. Starting the STOP+GO The function sets all cooking zones that operate to a keep warm setting. to start this function. The symbol comes on.
Helpful hints and tips Touch for 3 seconds. Touch . Touch for 3 seconds. . sound is off. Touch , comes on. The sound is on. 11 comes on, because the HELPFUL HINTS AND TIPS Cookware • The bottom of the cookware must be as thick and flat as possible. • Cookware made of enamelled steel and with aluminium or copper bottoms can cause discoloration on glass ceramic surface. Energy saving • • • • If possible, always put the lids on the cookware. Put cookware on a cooking zone before you start it.
What to do if... – Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic or stainless steel. 2. Clean the appliance with a moist cloth and some detergent. 3. At the end rub the appliance dry with a clean cloth. WHAT TO DO IF... Problem Possible cause and remedy You cannot activate the appliance or operate it. • Activate the appliance again and set the heat setting in 10 seconds.
Environment concerns Problem and number comes on. 13 Possible cause and remedy There is an error in the appliance. Disconnect the appliance from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect again. If comes on again, speak to the service centre. If you tried the above solutions and cannot repair the problem, speak to your dealer or the Customer Care Department.
892935931-B-342010 www.aeg-electrolux.
