Operation Manual

English
46
Cleaning and Maintenance
WARNING:
• Disconnectthehand-heldunitfromthepowersupplybeforecleaning.
• Donotimmersethepartsintowater.
CAUTION:
• Donotuseawirebrushorotherabrasives.
• Donotusesharporabrasivecleaningagents.
Shaving head with shaving blades
1. Switch of the shaver.
2. Press the shaving head button.
3. Clean the inside and the outside of the shaving head with the brush.
Cleaning the handset and the power cord
• Youmaywipethesepartswithadampcloth.
• Useslightlysoapywatertoremovespots.
Maintenance and replacement
• Cleantheshavingheadthoroughlyonceamonth.Ifnecessary,usespecialcleaning
aids available in specialist shops.
• Lubricatetheshavingfoilsandlonghaircuttingattachmentwithalightmachineoil(a
few drops suffice).
Replacement of shaving parts
To get 100% shaving performance, replace the shaver parts at least every 18 months or if
the parts show signs of wear. We recommend that you replace the parts as a set.
Noise emission
The workplace-related emission value is less than 70 dB(A).