IAE64851FB USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION...........................................................................................8 5.
ENGLISH 3 manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Seal the cut surfaces with a sealant to prevent moisture to cause swelling. • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window.
www.aeg.com • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Set the cooking zone to “off” after each use. • Do not rely on the pan detector. • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface.
ENGLISH 7 3. INSTALLATION WARNING! Refer to Safety chapters. 3.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. Serial number ........................... 3.2 Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards. min. min. 12 60 3.
www.aeg.com 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 3 1 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 2 4.2 Control panel layout 2 1 3 4 12 5 6 7 11 To see the available settings touch the appropriate symbol. Symbol Comment 1 ON / OFF To activate and deactivate the hob. 2 Menu To open and close the Menu. 3 Zone selection To open the slider for the selected zone.
ENGLISH Symbol 9 10 11 0-9 12 9 Comment - The window of the Hob²Hood infrared signal communicator. Do not cover it. Pause To activate and deactivate the function. - To show the current heat setting. FlexiBridge To switch between three modes of the function. 4.3 OptiHeat Control (3 step Residual heat indicator) WARNING! III / II / I There is a risk of burns from residual heat. The indicator shows the level of the residual heat.
www.aeg.com Settings Child Lock Stopwatch Hob²Hood H0 - Off H1 - Light only H2 - Fan speed low H3 - Auto Fan Low H4 - Auto Fan Medium H5 - Auto Fan High H6 - Auto Fan Boost Setup Assisted Cooking Language Key Tones Buzzer Volume Display Brightness Service Demo Mode License Show Software Version Alarm History Reset All Settings To leave the Menu touch or the right side of the display, outside of the pop-up window. To navigate through the Menu description appears.
ENGLISH 11 7. DAILY USE WARNING! Refer to Safety chapters. 7.1 Activating and deactivating Touch for 1 second to activate or deactivate the hob. 7.2 Automatic Switch Off The function deactivates the hob automatically if: • all cooking zones are deactivated, • you do not set the heat setting after you activate the hob, • you spill or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates.
www.aeg.com function can be activated only for a limited period of time. 1. Touch the desired zone symbol first. 2. Touch or slide your finger to the right to activate the function for the chosen cooking zone. The symbol turns red and becomes bigger. The function deactivates automatically. To deactivate the function manually select the zone and change its heat setting. For maximum duration values, refer to "Technical data". 7.
ENGLISH You can also choose to cancel your selection. When the time comes to an end, a signal sounds and the signal. flashes. Touch to stop To deactivate the function touch to next the left of the timer value, touch to it and confirm your choice when a pop-up window appears. To deactivate the function touch 13 . The function stops PowerBoost. The highest heat setting reactivates when you touch again. 7.9 Lock You can lock the control panel while the hob operates.
www.aeg.com To leave the Menu touch or the right side of the display, outside of the pop-up window. To navigate through the Menu use or . 7.12 Key Tones / Buzzer Volume You can choose the type of sound your hob emits or turn the sounds off. You can choose between the click (default) or beep. 1. Touch on the display to open the Menu. 2. Select Settings > Setup> Key Tones / Buzzer Volume from the list. 3. Choose the appropriate option.
ENGLISH 7.16 Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. The speed of the fan is defined automatically on the basis of the mode setting and the temperature of the hottest pot on the hob. For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to the hood user manual.
www.aeg.com FlexiBridge Standard is the default mode which activates automatically when you activate the hob. Two cooking zones operate independently. one cooking zone. The front section is not connected and operates as a separate cooking zone. You can set the heat setting for each zone separately. Touch to switch between the FlexiBridge modes. 8.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones.
ENGLISH 17 settings. The hob detects the position of the cookware and adjusts the pre-set power level accordingly. You can place the pot in the front, middle or rear position. If you place the cookware at the front you get the highest heat setting (i.e. 9). To decrease it, move the cookware to the middle (heat setting - 5) or rear position (heat setting -1). Correct cookware position: To use this mode you have to place the cookware on the four connected sections.
www.aeg.com 9. HINTS AND TIPS WARNING! Refer to Safety chapters. 9.1 Cookware For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with suitable cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain.
ENGLISH 19 Heat setting Use to: Time (min) Hints 1 Keep cooked food warm. as necessary Put a lid on the cookware. 1-2 Hollandaise sauce, melt: butter, chocolate, gelatine. 5 - 25 Mix from time to time. 1-2 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on. 2-3 Simmer rice and milkbased dishes, heat up ready-cooked meals. 25 - 50 Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure. 3-4 Steam vegetables, fish, meat.
www.aeg.com Keep the window of the Hob²Hood infrared signal communicator clean. Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on. Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol . 10. CARE AND CLEANING WARNING! Refer to Safety chapters. 10.
ENGLISH Problem The display does not react to the touch. 21 Possible cause Remedy The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. You do not set the heat setting for 60 seconds. Activate the hob again and set the heat setting in less than 60 seconds. You touched 2 or more sensor fields at the same time. Touch only one sensor field. Pause operates. Refer to "Daily use".
www.aeg.com Problem Possible cause Remedy There is no sound when you touch the panel sensor fields. The sounds are deactivated. Activate the sounds. Refer to "Daily use". Wrong language is set. You changed the language by mistake. Reset all functions to the factory settings. Select Reset All Settings from the Menu. Disconnect the hob from the electrical supply. After 1 min, connect the hob again. Set Language, Display Brightness and Buzzer Volume.
ENGLISH Problem and a number come on. 23 Possible cause Remedy FlexiBridge operates. One or more sections of the function mode which operates are not covered by the cookware. Place the cookware on the correct number of sections of the function mode which operates or change the function mode. Refer to "Flexible induction cooking area". PowerSlide operates. Two pots are placed on the flexible induction cooking area. Use only one pot. Refer to "Flexible induction cooking area".
www.aeg.com You can download the source code of the open source software by following the hyperlink present in the web product page. 12.
ENGLISH EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance 13.2 Energy saving You can save energy during everyday cooking if you follow below hints. • When you heat up water, use only the amount you need. 25 • If it is possible, always put the lids on the cookware. • Before you activate the cooking zone put the cookware on it. • Put the smaller cookware on the smaller cooking zones. • Put the cookware directly in the centre of the cooking zone.
www.aeg.
ENGLISH 27
867350558-A-502018 www.aeg.
