EN USER MANUAL DE BENUTZERHANDBUCH FR MANUEL D’INSTRUCTIONS
Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. When you operate the appliance with the function: • Protect the hood panel from direct sunlight. • Do not spot halogen light on the hood panel. • Do not cover the hob panel (eg.
Receiver activation Button T4 Function Press and hold for 3 seconds to enable the remote control, indicated by the LED flashing twice. Press and hold for 3 seconds to disable the remote control, indicated by the LED flashing just once. These models are supplied with the sensor already activated.
Abzugshauben mit Hob²Hood Funktion Dabei handelt es sich um eine innovative Automatikfunktion, die die Verbindung des Kochfelds mit einer Spezial-Abzugshaube ermöglicht. Kochfeld und Haube funktionieren mit einem Infrarot-Sender. Die Lüftergeschwindigkeit wird je nach Einstellung und Temperatur des Kochgeschirrs auf dem Kochfeld automatisch reguliert. Der Lüfter kann auch über das Kochfeld von Hand bedient werden.
Aktivierung des empfängers Taste T4 Funktion Die Taste 3 Sekunden lang gedrückt halten, um die Fernbedienung zu aktivieren, was durch zweimaliges Blinken der LED Lampe angezeigt wird. Die Taste 3 Sekunden lang gedrückt halten, um die Fernbedienung zu deaktivieren, was durch einmaliges Blinken der LED Lampe angezeigt wird. Diese Modelle werden mit bereits aktiviertem Sensor geliefert.
Hotte Hob²Hood Il s’agit d’une fonction automatique avancée qui raccorde la plaque de cuisson à une hotte spéciale. Un dispositif de communication à signal infrarouge est installé sur la plaque et sur la hotte. La vitesse de ventilation est automatiquement définie en fonction des paramétrages et la température de la casserole la plus chaude sur la plaque de cuisson. Le ventilateur peut également être utilisé en mode manuel à partir de la plaque de cuisson.
Activation du récepteur Bouton Fonction T4 Appuyez pendant 3 secondes pour activer la télécommande, jusqu’à ce que la led clignote deux fois. Appuyez pendant 3 secondes pour désactiver la télécommande, jusqu’à ce que la led clignote une fois seulement. Ces modèles sont équipés d’un capteur déjà activé.
991.0370.