IKB64303FB FR DE ES USER MANUAL Notice d'utilisation Table de cuisson Benutzerinformation Kochfeld Manual de instrucciones Placa de cocción 2 25 48
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................2 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. DESCRIPTION DE L'APPAREIL...................................................................................7 4. UTILISATION QUOTIDIENNE.................................................................................... 9 5. CONSEILS................
FRANÇAIS 3 utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • AVERTISSEMENT : Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge. ATTENTION : Toute cuisson doit être surveillée. Une cuisson courte doit être surveillée en permanence.
FRANÇAIS 5 2. CONSIGNES DE SÉCURITÉ 2.1 Installation AVERTISSEMENT! L'appareil doit être installé uniquement par un professionnel qualifié. AVERTISSEMENT! Risque de blessure corporelle ou de dommages matériels. • Retirez l'intégralité de l'emballage. • N'installez pas et ne branchez pas un appareil endommagé. • Suivez scrupuleusement les instructions d'installation fournies avec l'appareil. • Respectez l'espacement minimal requis par rapport aux autres appareils et éléments.
www.aeg.com • Si la prise de courant est lâche, ne branchez pas la fiche d'alimentation secteur. • Ne tirez jamais sur le câble d'alimentation pour débrancher l'appareil. Tirez toujours sur la fiche. • N'utilisez que des systèmes d'isolation appropriés : des coupecircuits, des fusibles (les fusibles à visser doivent être retirés du support), un disjoncteur différentiel et des contacteurs. • L'installation électrique doit être équipée d'un dispositif d'isolement à coupure omnipolaire.
FRANÇAIS Soulevez toujours ces objets lorsque vous devez les déplacer sur la surface de cuisson. • Cet appareil est exclusivement destiné à un usage culinaire. Ne l'utilisez pas pour des usages autres que celui pour lequel il a été conçu, à des fins de chauffage par exemple. 2.4 Entretien et nettoyage • Nettoyez régulièrement l'appareil afin de maintenir le revêtement en bon état. • Éteignez l'appareil et laissez-le refroidir avant de le nettoyer.
www.aeg.com 3.2 Description du bandeau de commande 2 1 3 4 5 11 10 6 9 7 8 Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. TouFonction che sensitive Commentaire MARCHE/ARRÊT Pour allumer et éteindre la table de cuisson. Hob²Hood Pour activer et désactiver le mode manuel de la fonction. 3 Verrou.
FRANÇAIS 9 3.3 Indicateurs de niveau de cuisson Écran d'affichage Description La zone de cuisson est désactivée. - / - La zone de cuisson est activée. Le point indique que le niveau de cuisson a changé de moitié. Pause est activée. Démarrage automatique de la cuisson est activée. PowerBoost est activée. + chiffre Une anomalie de fonctionnement s'est produite. / OptiHeat Control (Voyant de chaleur résiduelle à 3 niveaux) : continuer la cuisson / maintien au chaud / chaleur résiduelle. / Verrou.
www.aeg.com • vous ne réglez pas le niveau de cuisson après avoir allumé la table de cuisson, • vous avez renversé quelque chose ou placé un objet sur le bandeau de commande pendant plus de 10 secondes (une casserole, un torchon, etc.). Un signal sonore retentit et la table de cuisson s'éteint. Retirez l'objet du bandeau de commande ou nettoyez celui-ci. • la table de cuisson surchauffe (par ex. lorsqu'un récipient chauffe à vide).
FRANÇAIS jusqu'à ce que l'indicateur de la zone de cuisson correspondante s'affiche. Pour activer la fonction ou modifier la durée : appuyez sur la touche ou du minuteur pour régler la durée (de 00 à 99 minutes). Lorsque le voyant de la zone de cuisson commence à clignoter lentement, le décompte commence. Pour voir le temps restant : sélectionnez la zone de cuisson à l'aide de . Le voyant de la zone de cuisson clignote rapidement. L'affichage indique la durée restante.
www.aeg.com Pour désactiver la fonction : allumez la table de cuisson en appuyant sur . Ne sélectionnez pas de réglage de niveau de cuisson. Appuyez sur 4 secondes. pendant . s'allume. Appuyez sur pendant 4 secondes. Réglez le niveau de cuisson dans les 10 secondes qui suivent. Vous pouvez utiliser la table de cuisson. Lorsque vous éteignez la table de cuisson avec fonction est de nouveau activée. , la 4.
FRANÇAIS Fonction Gestionnaire de puissance avec la fonction Limitation de puissance Lorsque vous réglez la fonction Limitation de puissance sur 6,0 kW ou moins, la puissance de la table de cuisson est répartie entre toutes les zones de cuisson. 13 Sur la plupart des hottes, le système de commande à distance est désactivé par défaut. Activez-le avant d'utiliser cette fonction. Pour plus d'informations, reportez-vous au manuel d'utilisation de la hotte.
www.aeg.com Éclaira- Faire Faire frige auto- bouillir1) re2) matique Mode H6 Activé Vitesse Vitesse du venti- du ventilateur 2 lateur 3 1) La table de cuisson détecte le processus d'ébullition et sélectionne la vitesse du ventilateur en fonction du mode automatique. 2) La table de cuisson détecte le processus de friture et sélectionne la vitesse du ventilateur en fonction du mode automatique. 3) Ce mode active le ventilateur et l'éclairage, sans tenir compte sur la température.
FRANÇAIS 15 5. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 5.1 Récipients Sur les zones de cuisson à induction, un champ électromagnétique puissant chauffe les récipients très rapidement. Utilisez des récipients adaptés aux zones de cuisson à induction. Matériaux des récipients • adaptés : fonte, acier, acier émaillé, acier inoxydable, fond multicouche (homologué par le fabricant). • inadaptés : aluminium, cuivre, laiton, verre, céramique, porcelaine.
www.aeg.com Niveau de cuisson Utilisation : Durée (min) Conseils Conservez les aliments cuits au au bechaud. soin Placez un couvercle sur le récipient. 1-2 Sauce hollandaise, faire fondre : beurre, chocolat, gélatine. 5 - 25 Mélangez de temps en temps. 1-2 Solidifier : omelettes, œufs cocotte. 10 - 40 Couvrez pendant la cuisson. 2. - 3. Faire mijoter des plats à base de riz et de laitage, réchauffer des plats cuisinés.
FRANÇAIS 17 Hottes dotées de la fonction Hob²Hood Pour trouver la gamme complète des hottes dotées de cette fonction, consultez notre site web destiné aux consommateurs. Les hottes AEG qui sont dotées de cette fonction doivent porter le symbole . Les autres appareils télécommandés peuvent bloquer le signal. N'utilisez pas d'autre appareil télécommandé en même temps que la fonction de la table de cuisson. 6. ENTRETIEN ET NETTOYAGE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 6.
www.aeg.com 7. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 7.1 En cas d'anomalie de fonctionnement Problème Cause probable Solution Vous ne pouvez pas allumer la table de cuisson ni la faire fonctionner. La table de cuisson n'est pas connectée à une source d'alimentation électrique ou le branchement est incorrect. Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique.
FRANÇAIS 19 Problème Cause probable Solution Hob²Hood ne fonctionne pas. Vous avez couvert le bandeau de commande. Retirez l'objet du bandeau de commande. Vous utilisez un très grand récipient qui bloque le signal. Utilisez un plus petit récipient, changez la zone de cuisson ou faites fonctionner la hotte manuellement. Démarrage automatique de La zone est chaude. la cuisson ne fonctionne pas. Laissez la zone de cuisson refroidir. Le niveau de cuisson le plus élevé est réglé.
www.aeg.com Problème et un chiffre s'affichent. Cause probable Solution Une erreur s'est produite dans la table de cuisson. Éteignez la table de cuisson et rallumez-la au bout de 30 secondes. Si s'affiche à nouveau, débranchez la table de cuisson de la prise électrique. Au bout de 30 secondes, rebranchez la table de cuisson. Si le problème persiste, contactez le service après-vente agréé. Un bip constant se déclenche. Le branchement électrique n'est pas adapté. 7.
FRANÇAIS ATTENTION! Ne percez et ne soudez jamais les extrémités des fils. Cela est strictement interdit ! ATTENTION! Ne raccordez pas le câble sans gaine à l'extrémité. Raccordement biphasé 1. Retirez le câble et la gaine des fils noir et marron. 2. Dénudez les extrémités des fils noir et marron. 3. Appliquez un nouvelle gaine de 1,5 mm² à chaque extrémité du câble. (nécessite un outil spécial).
www.aeg.com min. 28 mm min. 60mm Si l'appareil est installé audessus d'un tiroir, la ventilation de la table de cuisson peut chauffer les éléments rangés dans le tiroir durant la cuisson. min. 12 mm 9. CARACTÉRISTIQUES TECHNIQUES 9.1 Plaque signalétique Modèle IKB64303FB Type 61 B4A 00 AD Induction 7.2 kW Numéro de série .......... AEG PNC 949 597 450 00 220 - 240 V / 400 V 2N 50 - 60 Hz Fabriqué en Allemagne 7.2 kW 9.
FRANÇAIS 23 Zone de cuisson Puissance nominale (niveau de cuisson max.) [W] PowerBoost [W] PowerBoost Diamètre du rédurée maximale cipient de cuis[min] son [mm] Arrière gauche 1800 2800 10 145 - 180 Avant droite 1400 2500 4 125 - 145 Arrière droite 1800 2800 10 145 - 180 La puissance des zones de cuisson peut légèrement différer des données du tableau. Elle dépend de la matière et des dimensions du récipient.
www.aeg.com • Posez directement le récipient au centre de la zone de cuisson. • Vous pouvez utiliser la chaleur résiduelle pour conserver les aliments au chaud ou pour faire fondre. 11. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le électroniques. Ne jetez pas les appareils symbole . Déposez les emballages dans les conteneurs prévus à cet effet.
DEUTSCH 25 INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE........................................................................................... 25 2. SICHERHEITSANWEISUNGEN.................................................................................28 3. GERÄTEBESCHREIBUNG......................................................................................... 31 4. TÄGLICHER GEBRAUCH.......................................................................................... 33 5. TIPPS UND HINWEISE....
www.aeg.com oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
DEUTSCH • • • • • • • • • • • 27 Sie vorsichtig und berühren Sie niemals die Heizelemente. Schalten Sie das Gerät nicht über eine externe Zeitschaltuhr oder eine separate Fernsteuerung ein. WARNUNG: Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. Versuchen Sie NICHT einen Brand mit Wasser zu löschen, sondern schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke.
www.aeg.com Bedienungsanleitung als geeignete und empfohlene Schutzabdeckungen oder die im Gerät enthaltene Schutzabdeckung. Es besteht Unfallgefahr durch die Verwendung ungeeigneter Schutzabdeckungen. 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Die Montage des Geräts darf nur von einer qualifizierten Fachkraft durchgeführt werden. WARNUNG! Verletzungsgefahr sowie Risiko von Schäden am Gerät. • Entfernen Sie das gesamte Verpackungsmaterial.
DEUTSCH • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker (falls vorhanden) und Netzkabel nicht zu beschädigen. Wenden Sie sich zum Austausch eines beschädigten Netzkabels an unseren autorisierten Kundendienst oder eine Elektrofachkraft. • Alle Teile, die gegen direktes Berühren schützen, sowie die isolierten Teile müssen so befestigt werden, dass sie nicht ohne Werkzeug entfernt werden können.
www.aeg.com • Stellen Sie kein heißes Kochgeschirr auf das Bedienfeld. • Stellen Sie keine heißen Pfannen auf die Glasoberfläche des Kochfeldes. • Lassen Sie das Kochgeschirr nicht leerkochen. • Lassen Sie keine Gegenstände oder Kochgeschirr auf das Gerät fallen. Die Oberfläche könnte beschädigt werden. • Schalten Sie die Kochzonen niemals ein, wenn sich kein Kochgeschirr darauf befindet, oder wenn das Kochgeschirr leer ist. • Legen Sie keine Alufolie auf das Gerät.
DEUTSCH 31 3. GERÄTEBESCHREIBUNG 3.1 Kochfeldanordnung 1 1 180 mm 180 mm 210 mm 145 mm 1 1 Induktionskochzone 2 Bedienfeld 1 2 3.2 Bedienfeldanordnung 2 1 3 4 5 11 10 6 9 7 8 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen. SenFunktion sorfeld Kommentar EIN/AUS Ein- und Ausschalten des Kochfeldes. Hob²Hood Ein- und Ausschalten des manuellen Modus der Funktion.
www.aeg.com SenFunktion sorfeld - Auswählen der Kochzone. / - Erhöhen oder Verringern der Zeit. / - Einstellen der Kochstufe. PowerBoost Einschalten der Funktion. 8 9 10 Kommentar 11 3.3 Anzeigen der Kochstufen Display Beschreibung Die Kochzone ist ausgeschaltet. - / - Die Kochzone ist eingeschaltet. Der Punkt zeigt eine Änderung um eine halbe Kochstufe an. Pause ist aktiviert. Ankochautomatik ist aktiviert. PowerBoost ist aktiviert. + Zahl Eine Störung ist aufgetreten.
DEUTSCH 3.4 OptiHeat Control (Restwärmeanzeige, 3-stufig) WARNUNG! / / Es besteht Verbrennungsgefahr durch Restwärme. Die Anzeigen zeigen den Restwärmegrad der Kochzonen an, die Sie gerade verwenden. Die Anzeigen der benachbarten Kochzonen können auch dann leuchten, wenn Sie sie nicht benutzen. 33 Die Induktionskochzonen erzeugen die erforderliche Hitze zum Kochen direkt im Boden des Kochgeschirrs. Die Glaskeramik wird nur durch die Wärme des Kochgeschirrs erhitzt. 4.
www.aeg.com Kochstufe eingestellt und anschließend auf die erforderliche Stufe zurückgeschaltet. Zum Einschalten der Funktion muss die Kochzone abgekühlt sein. Einschalten der Funktion für eine ( leuchtet Kochzone: Berühren Sie auf). Berühren Sie unmittelbar danach ( leuchtet auf). Berühren Sie unmittelbar danach , bis die erforderliche Kochstufeneinstellung angezeigt wird. Nach 3 Sekunden leuchtet auf.
DEUTSCH 4.7 Pause Sekunden lang. Mit dieser Funktion werden alle eingeschalteten Kochzonen auf die niedrigste Kochstufe geschaltet. Sie das Kochfeld mit Wenn diese Funktion eingeschaltet ist, werden alle anderen Symbole des Bedienfelds verriegelt. Die Funktion unterbricht nicht die TimerFunktionen. Berühren Sie zum Einschalten der Funktion . erscheint.Die Kochstufe wird auf 1 herunterschaltet. Berühren Sie zum Ausschalten der Funktion . Es wird wieder die vorherige Kochstufe eingeschaltet.
www.aeg.com 3. Berühren Sie wird oder 4. Berühren Sie angezeigt. 3 Sekunden lang. Es angezeigt. des Kochfelds auf alle Kochzonen verteilt. . Es wird P 72 5. Berühren Sie / des Timers, um die Leistungsstufe einzustellen. Leistungsstufen Siehe Kapitel „Technische Daten“.
DEUTSCH Bei den meisten Dunstabzugshauben ist das Fernsteuerungssystem werkseitig ausgeschaltet. Schalten Sie es ein, bevor Sie die Funktion nutzen. Weitere Informationen finden Sie in der Anleitung der Dunstabzugshaube. Automatikbetrieb der Funktion Stellen Sie für den automatischen Betrieb den Modus auf H1 – H6. Das Kochfeld ist standardmäßig auf H5 gestellt.Die Dunstabzugshaube schaltet sich ein, wenn Sie das Kochfeld bedienen.
www.aeg.com Manuelles Einstellen der Lüftergeschwindigkeit Sie können den Lüfter auch manuell einstellen. Berühren Sie hierzu , wenn das Kochfeld eingeschaltet ist. Auf diese Weise wird der Automatikbetrieb ausgeschaltet und Sie können die Lüftergeschwindigkeit manuell ändern. Durch Drücken von erhöht sich die Lüftergeschwindigkeit um eine Stufe. Wenn Sie die Intensivstufe gewählt haben und erneut drücken, wird die Geschwindigkeit auf 0 gesetzt und die Dunstabzugshaube ausgeschaltet.
DEUTSCH unterschiedlichen Materialien (Sandwichkonstruktion). • Summen: Sie haben die Kochzone auf eine hohe Stufe geschaltet. • Klicken: Bei elektronischen Schaltvorgängen. • Zischen, Surren: Der Ventilator läuft. Die Geräusche sind normal und weisen nicht auf eine Störung des Kochfelds hin. 39 Kochzone ist nicht linear. Bei einer höheren Kochstufe steigt der Energieverbrauch nicht proportional an.
www.aeg.com Kochstufe Verwendung: Dauer (Min.) Hinweise 9 Aufkochen von Wasser, Nudeln kochen, Anbraten von Fleisch (Gulasch, Schmorbraten), Frittieren von Pommes frites. Aufkochen großer Mengen Wasser. PowerBoost ist eingeschaltet. 5.4 Tipps und Hinweise für Hob²Hood Wenn Sie das Kochfeld mit dieser Funktion betreiben: • Schützen Sie das Bedienfeld der Dunstabzugshaube vor direkter Sonneneinstrahlung. • Richten Sie keine Halogenstrahler auf das Bedienfeld der Dunstabzugshaube.
DEUTSCH • Kratzer oder dunkle Flecken auf der Oberfläche beeinträchtigen die Funktionsfähigkeit des Kochfelds nicht. • Verwenden Sie einen Spezialreiniger zur Reinigung der Kochfeldoberfläche. • Verwenden Sie einen speziellen Reinigungsschaber für Glas. 6.2 Reinigen des Kochfelds • Folgendes muss sofort entfernt werden: Geschmolzener Kunststoff, Plastikfolie, Zucker und zuckerhaltige Lebensmittel. Anderenfalls können die Verschmutzungen das Kochfeld beschädigen.
www.aeg.com Störung Mögliche Ursache Abhilfe Pause ist eingeschaltet. Siehe „Täglicher Gebrauch“. Auf dem Bedienfeld befinden sich Wasser- oder Fettspritzer. Wischen Sie das Bedienfeld ab. Ein akustisches Signal ertönt Mindestens ein Sensorfeld und das Kochfeld schaltet wurde bedeckt. ab. Wenn das Kochfeld ausgeschaltet wird, ertönt ein akustisches Signal. Entfernen Sie den Gegenstand von den Sensorfeldern. Das Kochfeld wird ausgeschaltet. Entfernen Sie den Gegenstand vom Sensorfeld.
DEUTSCH Störung leuchtet auf. 43 Mögliche Ursache Abhilfe Es wurde kein Kochgeschirr auf die Kochzone gestellt. Stellen Sie Kochgeschirr auf die Kochzone. Sie verwenden ungeeignetes Kochgeschirr. Verwenden Sie geeignetes Kochgeschirr. Siehe Kapitel „Tipps und Hinweise“. Der Durchmesser des Kochgeschirrbodens ist zu klein für die Kochzone. Verwenden Sie Kochgeschirr mit den richtigen Abmessungen. Siehe hierzu „Technische Daten“. und eine Zahl werden an- Es ist ein Fehler im Kochfeld aufgetreten.
www.aeg.com Seriennummer ............ VORSICHT! Verdrillen oder verlöten Sie die Kabelenden nicht. Dies ist streng verboten! 8.2 Einbau-Kochfelder Einbau-Kochfelder dürfen nur nach dem Einbau in bzw. unter normgerechte, passende Einbauschränke und Arbeitsplatten betrieben werden. 8.3 Anschlusskabel • Das Kochfeld wird mit dem Anschlusskabel geliefert. • Ersetzen Sie das beschädigte Kabel nur durch ein geeignetes Ersatzkabel.
DEUTSCH 8.4 Montage min. 12 mm min. 500mm min. 50mm R 5mm min. 60mm min. 55mm 490+1mm 560+1mm min. 28 mm Wird das Gerät über einer Schublade montiert, kann die Lüftung des Kochfelds die Gegenstände, die in der Schublade gelagert sind, während des Garvorgangs erwärmen.
www.aeg.com 9. TECHNISCHE DATEN 9.1 Typenschild Modell IKB64303FB Typ 61 B4A 00 AD Induktion 7.2 kW Ser. Nr. .......... AEG Produkt-Nummer (PNC) 949 597 450 00 220 - 240 V/400 V 2N, 50 - 60 Hz Made in Germany 7.2 kW 9.
DEUTSCH EN 60350-2 - Elektrische Kochgeräte für den Hausgebrauch - Teil 2: Kochfelder Verfahren zur Messung der Gebrauchseigenschaften 10.2 Energie sparen Beachten Sie folgende Tipps, um beim täglichen Kochen Energie zu sparen. • Wenn Sie Wasser erwärmen, verwenden Sie nur die benötigte Menge. 47 • Decken Sie Kochgeschirr, wenn möglich, mit einem Deckel ab. • Stellen Sie Kochgeschirr auf die Kochzone, bevor Sie sie einschalten. • Stellen Sie kleineres Kochgeschirr auf die kleineren Kochzonen.
www.aeg.com CONTENIDO 1. INFORMACIÓN SOBRE SEGURIDAD..................................................................... 48 2. INSTRUCCIONES DE SEGURIDAD..........................................................................50 3. DESCRIPCIÓN DEL PRODUCTO............................................................................. 53 4. USO DIARIO...............................................................................................................55 5. CONSEJOS..............................
ESPAÑOL 49 Conserve siempre estas instrucciones en lugar seguro y accesible para futuras consultas. 1.
www.aeg.com • • • • • • • • • NUNCA intente apagar un fuego con agua; apague el aparato y cubra la llama con una tapa o una manta ignífuga. ATENCIÓN: El proceso de cocción debe ser supervisado. Un proceso de cocción breve debe estar permanentemente supervisado. ADVERTENCIA: Peligro de incendio: No utilice las superficies de cocción para almacenar alimentos. No deje objetos metálicos, como cuchillos, tenedores, cucharas o tapas sobre la superficie de cocción para evitar que se calienten.
ESPAÑOL • Siga las instrucciones de instalación suministradas con el aparato. • Respete siempre la distancia mínima entre el aparato y los demás electrodomésticos y mobiliario. • Tenga cuidado al mover el aparato, porque es pesado. Utilice siempre guantes de protección y calzado cerrado. • Proteja las superficies cortadas con un material sellante para evitar que la humedad las hinche. • Proteja la parte inferior del aparato del vapor y la humedad.
www.aeg.com 2.3 Uso del aparato ADVERTENCIA! Riesgo de lesiones, quemaduras y descargas eléctricas. • Retire todo el embalaje, las etiquetas y la película protectora (en su caso) antes del primer uso. • Utilice este aparato en entornos domésticos. • No cambie las especificaciones de este aparato. • Cerciórese de que los orificios de ventilación no están obstruidos. • No deje nunca el aparato desatendido mientras está en funcionamiento. • Apague las zonas de cocción después de cada uso.
ESPAÑOL • Póngase en contacto con las autoridades locales para saber cómo desechar correctamente el aparato. • Desconecte el aparato de la red. • Corte el cable eléctrico cerca del aparato y deséchelo. abrasivos, estropajos duros, disolventes ni objetos de metal. 2.5 Asistencia • Para reparar el aparato, póngase en contacto con un centro de servicio autorizado. • Utilice solamente piezas de recambio originales. 2.6 Eliminación ADVERTENCIA! Existe riesgo de lesiones o asfixia. 3.
www.aeg.com Sensor Función Comentario ENCENDIDO/APAGADO Para activar y desactivar la placa. Hob²Hood Para activar y desactivar el modo manual de la función. 3 Bloqueo / Bloqueo de seguridad para niños Para bloquear y desbloquear el panel de control. 4 Pausa Para activar y desactivar la función . 1 2 5 6 7 - Indicador del nivel de calor Para mostrar el nivel de calor. - Indicadores de tiempo de las zonas de cocción Muestra la zona para la que se ha ajustado la hora.
ESPAÑOL Pantalla 55 Descripción El recipiente es inadecuado o demasiado pequeño, o no se ha colocado ningún recipiente sobre la zona de cocción. Apagado automático está en funcionamiento. 3.4 OptiHeat Control (indicador de calor residual de 3 pasos) ADVERTENCIA! / / Riesgo de quemaduras por calor residual. Los indicadores muestran el nivel de calor residual de las zonas de cocción que está usando. También pueden iluminarse los indicadores de las zonas de cocción vecinas aunque no las esté utilizando.
www.aeg.com Para activar la función de una zona de Ajuste del nivel de calor La placa de cocción se apaga. 5 4 horas 6-9 1,5 hora cocción: toque símbolo . Se encenderá el . Para desactivar la función: toque o . 4.6 Temporizador 4.3 Ajuste de temperatura calor. Toque y al mismo tiempo para apagar la zona de cocción. Temporizador Puede utilizar esta función para ajustar el tiempo que desee que funcione la zona de cocción para un único proceso de cocción. 4.
ESPAÑOL Para activar la función: toque . Toque o del temporizador para ajustar el tiempo. Cuando ha transcurrido el tiempo, se activa la señal acústica y 00 parpadea. Para detener la señal acústica: toque . 4.9 Bloqueo de seguridad para niños Esta función impide el uso accidental o indebido de la placa. Para activar la función: encienda la placa de cocción con . No ajuste los durante 4 niveles de calor. Pulse Para desactivar la función: toque y después .
www.aeg.com 4.11 Limitación de potencia Inicialmente, la placa de cocción tiene ajustado el nivel de potencia más alto posible. Para aumentar o disminuir el nivel de potencia: 1. Apague la placa de cocción. 2. Toque durante 3 segundos. La pantalla se enciende y se apaga. 3. Toque durante 3 segundos. • La pantalla de ajuste de calor para las zonas reducidas cambia entre dos niveles.
ESPAÑOL Para la mayoría de las campanas, el sistema remoto esta desactivado de origen. Actívelo antes de usar la función. Para más información, consulte el manual de instrucciones de la campana. Uso automático de la función Para utilizar la función automáticamente, ajuste el modo automático en H1 – H6. La placa está ajustada de origen en H5.La campana reacciona siempre que funciona la placa.
www.aeg.com Al pulsar se incrementa en un nivel la velocidad del ventilador. Cuando alcance un nivel intensivo y pulse de nuevo, ajustará la velocidad del ventilador en 0 y lo apagará. Para volver a poner en marcha el ventilador con la velocidad 1, toque . Para activar el funcionamiento automático, apague la placa de cocción y vuelva a encenderla. Activación de la luz Puede hacer que la placa de cocción active automáticamente la luz al encender la placa.
ESPAÑOL 61 • chasquido: cambios en el suministro eléctrico. • siseo, zumbido: el ventilador está en funcionamiento. Los ruidos son normales y no indican fallo alguno de la placa de cocción. cocción no es lineal. Cuando se aumenta el ajuste de calor, no es proporcional al aumento del consumo de potencia. Significa que una zona de cocción con el ajuste de calor medio usa menos de la mitad de su potencia. 5.3 Ejemplos de aplicaciones de cocción Los datos de la tabla son solo orientativos.
www.aeg.com 5.4 Consejos para Hob²Hood Otros aparatos controlados a distancia pueden bloquear la señal. No utilice otros aparatos controlados a distancia a la vez que la función de la placa de cocción. Cuando utilice la placa de cocción con la función: • Proteja el panel de la campana de la luz solar directa. • No dirija focos halógenos hacia el panel de la campana. • No cubra el panel de control de la placa de cocción.
ESPAÑOL • Elimine cualquier decoloración metálica brillante: utilice una solución de agua y vinagre para 63 limpiar la superficie de cristal con un paño. 7. SOLUCIÓN DE PROBLEMAS ADVERTENCIA! Consulte los capítulos sobre seguridad. 7.1 Qué hacer si... Problema Posible causa Solución La placa no se enciende o no funciona. La placa no está conectada a Compruebe si la placa se ha un suministro eléctrico o es- conectado correctamente a tá mal conectada. la red eléctrica.
www.aeg.com Problema Posible causa Solución Hob²Hood no funciona. Ha tapado el panel de control. Retire el objeto del panel de control. Puede estar utilizando un utensilio muy alto que bloquea la señal. Utilice un utensilio más pequeño, cambie la zona de cocción o manipule manualmente la campana de cocción. La zona está caliente. Deje que la zona se enfríe suficientemente. Se ha ajustado el nivel de calor más alto. El nivel de cocción máximo tiene la misma potencia que la función.
ESPAÑOL 65 Problema Posible causa Solución Se oye un pitido constante. La conexión eléctrica no es adecuada. Desconecte la placa de cocción de la red eléctrica. Pida a un electricista cualificado que compruebe la instalación. 7.2 Si no encuentra una solución... Si no logra subsanar el problema, póngase en contacto con su distribuidor o el centro de servicio técnico. Facilite la información de la placa de características.
www.aeg.com 3. Coloque un nuevo manguito de 1,5 mm² en cada extremo de cable. (se necesita una herramienta especial). Sección transversal del cable 230V~ 400V 2~N N N L L1 L2 Conexión monofásica - 230 V~ Conexión bifásica - 400 V 2 ~ N Verde - amarillo Verde - amarillo N Azul y azul Azul y azul N L Negro y marrón Negro L1 Marrón L2 8.4 Montaje R 5mm min. 500mm min. 50mm min. 55mm 490+1mm 560+1mm min.
ESPAÑOL 67 Si el aparato se instala sobre un cajón, la ventilación de la placa puede calentar el contenido del cajón durante el proceso de cocción. min. 12 mm min. 60mm 9. DATOS TÉCNICOS 9.1 Placa de características Modelo IKB64303FB Tipo 61 B4A 00 AD Inducción 7.2 kW Nº ser. ................. AEG Número de producto (PNC) 949 597 450 00 220 - 240 V / 400 V 2N 50 - 60 Hz Fabricado en Alemania 7.2 kW 9.2 Especificaciones de las zonas de cocción Zona de cocción Potencia nominal (ajuste de calor máx.
www.aeg.com Zona de cocción Potencia nominal (ajuste de calor máx.) [W] PowerBoost [W] PowerBoost duración máxima [min] Diámetro del utensilio de cocina [mm] Posterior izquierda 1800 2800 10 145 - 180 Anterior derecha 1400 2500 4 125 - 145 Posterior derecha 1800 2800 10 145 - 180 La potencia de las zonas de cocción puede variar ligeramente de los datos de la tabla. Cambia con el material y las dimensiones del utensilio de cocina.
ESPAÑOL • Coloque los utensilios de cocina pequeños en zonas de cocción pequeñas. • Coloque el utensilio de cocina directamente en el centro de la zona de cocción. 69 • Utilice el calor residual para mantener calientes los alimentos o derretirlos. 11. ASPECTOS MEDIOAMBIENTALES Recicle los materiales con el símbolo . Coloque el material de embalaje en los contenedores adecuados para su reciclaje.
www.aeg.
ESPAÑOL 71
867346841-B-162018 www.aeg.