IKE64473XB USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION...........................................................................................7 4. DAILY USE.................................................................................................................... 9 5.
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector.
ENGLISH the appliance when the door or the window is opened. • Each appliance has cooling fans on the bottom. • If the appliance is installed above a drawer: – Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system. – Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer. 2.2 Electrical Connection WARNING! Risk of fire and electric shock.
www.aeg.com • If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock. • Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation. • When you place food into hot oil, it may splash. can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface.
ENGLISH 7 3. PRODUCT DESCRIPTION 3.1 Cooking surface layout 3 1 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 2 3.2 Control panel layout 1 2 3 4 5 6 13 7 12 8 11 10 9 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 ON / OFF 2 Lock / Child Safety Device To lock / unlock the control panel.
www.aeg.com Sensor Function field 8 9 10 - 11 / 12 - 13 Comment Hob²Hood To activate and deactivate the manual mode of the function. PowerBoost To activate and deactivate the function. Control bar To set a heat setting. - To select the cooking zone. - To increase or decrease the time. Control bar To set the heat setting for flexible induction cooking area. 3.3 Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates.
ENGLISH 3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicators show the level of the residual heat for the cooking zones you are currently using. The indicators may also come on for the neighbouring cooking zones even if you are not using them. 9 The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 4.
www.aeg.com same time. The cookware must cover the centres of both zones. 4.5 Automatic Heat Up To see the remaining time: set the Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting. To activate the function for a cooking zone: touch ( comes on). Immediately touch a desired heat comes on. To deactivate the function: change the heat setting. 4.
ENGLISH To activate the function: touch 4.10 OffSound Control (Deactivating and activating the sounds) . Touch or of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes. To stop the sound: touch for 3 Deactivate the hob. Touch seconds. The display comes on and goes . out. Touch The function has no effect on the operation of the cooking zones. for 3 seconds. or comes on. Touch of the timer to choose one of the following: • 4.
www.aeg.com CAUTION! Make sure that the selected power fits the house installation fuses. 4.12 Power management function • Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration. • Each phase has a maximum electricity loading of 3600 W. • The function divides the power between cooking zones connected to the same phase. • The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3600 W.
ENGLISH Automatic light Boiling1) Frying2) Mode H4 On Fan speed 1 Fan speed 1 Mode H5 On Fan speed 1 Fan speed 2 Mode H6 On Fan speed 2 Fan speed 3 1) The hob detects the boiling process and activates fan speed in accordance with automatic mode. 2) The hob detects the frying process and activates fan speed in accordance with automatic mode. 3) This mode activates the fan and the light and does not rely on the temperature. Changing the automatic mode 1. Deactivate the appliance. for 3 seconds.
www.aeg.com can be combined into two cooking zones with different size, or into one large cooking area. You choose the combination of the sections by choosing the mode applicable to the size of the cookware you want to use. There are three modes: Standard (activated automatically when you activate the hob), Big Bridge and Max Bridge. To set the heat setting use two left side control bars. Switching between the modes 100-160mm To switch between the modes use sensor field: .
ENGLISH 15 Incorrect cookware position: Incorrect cookware position: 5.3 FlexiBridge Big Bridge mode To activate the mode press until you see the correct mode indicator . This mode connects three rear sections into one cooking zone. The one front section is not connected and operates as a separate cooking zone. You can set the heat setting for each zone separately. Use two left side control bars. 5.4 FlexiBridge Max Bridge mode To activate the mode press until you see the correct mode indicator .
www.aeg.com General information: Incorrect cookware position: • 160 mm is the minimum bottom diameter of the cookware for this function. • Heat setting display for the left rear control bar shows the position of the cookware on the induction cooking area. Front , middle , rear . 5.5 PowerSlide function This function allows you to adjust the temperature by moving the cookware to a different position on the induction cooking area.
ENGLISH Activating the function Deactivating the function To activate the function place the cookware in the correct position on the To deactivate the function touch cooking area. Touch . The indicator above the symbol comes on. If you do not place the cookware on the cooking set the heat setting to above the symbol 17 or . The indicator goes off. comes on and after 2 minutes area the flexible induction cooking area is set to . 6. HINTS AND TIPS WARNING! Refer to Safety chapters. 6.
www.aeg.com setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power. Heat setting The data in the table is for guidance only. Use to: Time (min) Hints Keep cooked food warm. as necessary Put a lid on the cookware. 1-3 Hollandaise sauce, melt: butter, chocolate, gelatine. 5 - 25 Mix from time to time. 1-3 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.
ENGLISH 19 Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol . Other remotely controlled appliances may block the signal. Do not use any remotely controlled appliances at the time when you use the function on the hob. 7. CARE AND CLEANING WARNING! Refer to Safety chapters. 7.1 General information • Clean the hob after each use.
www.aeg.com 8.1 What to do if... Problem Possible cause You cannot activate or oper- The hob is not connected to ate the hob. an electrical supply or it is connected incorrectly. Remedy Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. You do not set the heat setting for 10 seconds.
ENGLISH 21 Problem Possible cause Remedy The sensor fields become hot. The cookware is too large or Put large cookware on the you put it too near to the rear zones if possible. controls. There is no sound when you touch the panel sensor fields. The sounds are deactivated. Activate the sounds. Refer to "Daily use". The flexible induction cooking area does not heat up the cookware. The cookware is in a wrong position on the flexible induction cooking area.
www.aeg.com Problem and a number come on. Possible cause Remedy There is an error in the hob. Deactivate the hob and activate it again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre. You can hear a constant beep noise. The electrical connection is incorrect. 8.2 If you cannot find a solution...
ENGLISH 23 Cable cross section 230V~ 400V 2~N N N L1 L L2 One-phase connection - 230 V~ Two-phase connection - 400 V 2 ~ N Green - yellow Green - yellow N Blue and blue Blue and blue N L Black and brown Black L1 Brown L2 9.4 Assembly min. 28 mm min. 500mm min. 50mm min. 12 mm R 5mm min.
www.aeg.com If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process. min. 60mm 10. TECHNICAL DATA 10.1 Rating plate Model IKE64473XB Typ 62 B4A 05 AD Induction 7.2 kW Ser.Nr. ................. AEG PNC 949 597 463 00 220 - 240 V / 400 V 2N 50 - 60 Hz Made in Germany 7.2 kW 10.
ENGLISH 25 11. ENERGY EFFICIENCY 11.1 Product information according to EU 66/2014 Model identification IKE64473XB Type of hob Built-In Hob Number of cooking zones 2 Number of cooking areas 1 Heating technology Induction Diameter of circular cooking zones (Ø) Right front Right rear 14.5 cm 18.0 cm Lenght (L) and width (W) of the cooking area Left L 45.9 cm W 21.4 cm Energy consumption per cooking zone (EC electric cooking) Right front Right rear 180.4 Wh / kg 175.
www.aeg.
ENGLISH 27
867346957-A-072018 www.aeg.
