IKE74470FB USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION...........................................................................................8 5. DAILY USE.
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Seal the cut surfaces with a sealant to prevent moisture to cause swelling. • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window.
www.aeg.com • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Set the cooking zone to “off” after each use. • Do not rely on the pan detector. • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface.
ENGLISH 7 3. INSTALLATION WARNING! Refer to Safety chapters. 520 710 60 3.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. 23 280 44 550 min. 55 490+1 680+1 max R5 Serial number ........................... 3.2 Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards. 3.
www.aeg.com 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 3 1 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 2 4.2 Control panel layout 1 2 3 4 5 6 12 7 11 10 9 8 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 ON / OFF 2 Lock / Child Safety Device To lock / unlock the control panel.
ENGLISH 9 Sensor Function field Comment - Control bar To set a heat setting. - To select the cooking zone. - To increase or decrease the time. Control bar To set the heat setting for flexible induction cooking area. 10 / 11 - 12 4.3 Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - Automatic Heat Up operates. PowerBoost operates. + digit There is a malfunction.
www.aeg.com 4.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicators show the level of the residual heat for the cooking zones you are currently using. The indicators may also come on for the neighbouring cooking zones even if you are not using them. The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 5.
ENGLISH 5.5 Automatic Heat Up To see the remaining time: set the Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting. cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. To activate the function the cooking zone must be cold. To activate the function for a cooking ( comes on).
www.aeg.com To stop the sound: touch . out. Touch The function has no effect on the operation of the cooking zones. • You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting. To activate the function: touch . comes on for 4 seconds. The Timer stays on. To deactivate the function: touch . The previous heat setting comes on. 5.9 Child Safety Device This function prevents an accidental operation of the hob.
ENGLISH 13 6. FLEXIBLE INDUCTION COOKING AREA WARNING! Refer to Safety chapters. 6.1 FlexiBridge function The flexible induction cooking area consists of four sections. The sections can be combined into two cooking zones with different size, or into one large cooking area. You choose the combination of the sections by choosing the mode applicable to the size of the cookware you want to use. There are three modes: Standard (activated automatically when you activate the hob), Big Bridge and Max Bridge.
www.aeg.com Incorrect cookware position: Incorrect cookware position: 6.3 FlexiBridge Big Bridge mode To activate the mode touch until you see the correct mode indicator . This mode connects three rear sections into one cooking zone. The front section is not connected and operates as a separate cooking zone. You can set the heat setting for each zone separately. Use two left side control bars. 6.4 FlexiBridge Max Bridge mode To activate the mode touch until you see the correct mode indicator .
ENGLISH 15 General information: Incorrect cookware position: • 160 mm is the minimum bottom diameter of the cookware for this function. • Heat setting display for the left rear control bar shows the position of the cookware on the induction cooking area. Front , middle , rear . 6.5 PowerSlide function This function allows you to adjust the temperature by moving the cookware to a different position on the induction cooking area.
www.aeg.com Activating the function Deactivating the function To activate the function place the cookware in the correct position on the To deactivate the function touch cooking area. Touch . The indicator above the symbol comes on. If you do not place the cookware on the cooking above the symbol set the heat setting to or . The indicator goes off. comes on and after 2 minutes area the flexible induction cooking area is set to . 7. HINTS AND TIPS WARNING! Refer to Safety chapters. 7.
ENGLISH heat setting level and the length of the cooking operation. 7.5 Examples of cooking applications setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power. The data in the table is for guidance only. The correlation between the heat setting of a zone and its consumption of power is not linear.
www.aeg.com to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth. • Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth.
ENGLISH 19 Problem Possible cause Remedy Residual heat indicator does not come on. The zone is not hot because it operated only for a short time or the sensor is damaged. If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre. Automatic Heat Up does not The zone is hot. operate. Let the zone become sufficiently cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels.
www.aeg.com Problem and a number come on. Possible cause Remedy The diameter of the bottom of the cookware is too small for the zone. Use cookware with correct dimensions. Refer to "Technical data". FlexiBridge operates. One or more sections of the function mode which operates are not covered by the cookware. Place the cookware on the correct number of sections of the function mode which operates or change the function mode. Refer to "Flexible induction cooking area". PowerSlide operates.
ENGLISH 21 10.2 Cooking zones specification Cooking zone Nominal power PowerBoost (maximum heat [W] setting) [W] PowerBoost Cookware diammaximum dura- eter [mm] tion [min] Middle front 1400 2500 4 125 - 145 Right rear 2300 2800 10 180 - 240 Flexible induction cooking area 2200 2700 10 minimum 100 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
www.aeg.
ENGLISH 23
867350573-A-502018 www.aeg.
