IKE85473FB EN FR DE USER MANUAL User Manual Hob Notice d'utilisation Table de cuisson Benutzerinformation Kochfeld 2 26 53
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION...........................................................................................8 5. DAILY USE.
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Seal the cut surfaces with a sealant to prevent moisture to cause swelling. • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window.
www.aeg.com • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Set the cooking zone to “off” after each use. • Do not rely on the pan detector. • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface.
ENGLISH 7 3. INSTALLATION WARNING! All electrical connections must be made by a qualified electrician. WARNING! Refer to Safety chapters. 3.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. CAUTION! Do not drill or solder the wire ends. This is strictly forbidden! Serial number ........................... CAUTION! Do not connect the cable without cable end sleeve. 3.
www.aeg.com 3.4 Assembly If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process. min. 500mm min. 50mm 4. PRODUCT DESCRIPTION 4.
ENGLISH 9 4.2 Control panel layout 1 2 3 4 5 6 7 8 13 12 14 11 10 9 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 ON / OFF 2 Lock / Child Safety Device To lock / unlock the control panel. 3 PowerSlide To activate and deactivate the function. FlexiBridge To switch between three modes of the function. - Heat setting display To show the heat setting.
www.aeg.com 4.3 Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - Pause operates. Automatic Heat Up operates. PowerBoost operates. + digit There is a malfunction. / OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual heat. / Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates. / / PowerSlide operates. 4.
ENGLISH seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. • the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. • you use incorrect cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. • you do not deactivate a cooking zone or change the heat setting. After some time comes on and the hob deactivates.
www.aeg.com To deactivate the function: set the 5.7 Pause cooking zone with and touch . The remaining time counts back to 00. The indicator of the cooking zone goes out. This function sets all cooking zones that operate to the lowest heat setting. When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates. To stop the sound: touch . The function does not stop the timer functions.
ENGLISH deactivate the hob with operates again. the function 5.10 OffSound Control (Deactivating and activating the sounds) Deactivate the hob. Touch for 3 seconds. The display comes on and goes out. Touch for 3 seconds. or comes on. Touch of the timer to choose one of the following: • - the sounds are off - the sounds are on • To confirm your selection wait until the hob deactivates automatically.
www.aeg.com Automatic light 5.13 Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. For most of the hoods the remote system is originally deactivated. Activate it before you use the function.
ENGLISH you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed 1 touch . To activate automatic operation of the function, deactivate the hob and activate it again. 15 Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6.
www.aeg.com > 160 mm 6.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones. You can set the heat setting for each zone separately. Use two left side control bars. Correct cookware position: 6.3 FlexiBridge Big Bridge mode To activate the mode touch until you see the correct mode indicator . This mode connects three rear sections into one cooking zone.
ENGLISH 17 6.4 FlexiBridge Max Bridge mode To activate the mode touch until you see the correct mode indicator . This mode connects all sections into one cooking zone. To set the heat setting use any of the two control bars on the left side. Correct cookware position: To use this mode you have to place the cookware on the four connected sections. If you use cookware smaller 6.
www.aeg.com You can change the heat settings for each position separately. The hob will remember your heat settings next time you activate the function. Activating the function . To activate the function place the cookware in the correct position on the • Heat setting display for the left front control bar shows the heat setting. To change the heat setting use left front control bar.
ENGLISH Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone. Refer to "Technical data". 7.2 The noises during operation If you can hear: • crack noise: cookware is made of different materials (a sandwich construction).
www.aeg.com Heat setting Use to: Time (min) Hints 9 - 12 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts. as necessary Turn halfway through. 12 - 13 Heavy fry, hash browns, loin steaks, steaks. 5 - 15 Turn halfway through. 14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips. Boil large quantities of water. PowerBoost is activated. 7.
ENGLISH • Always use cookware with a clean base. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner suitable for the surface of the hob. • Use a special scraper for the glass. The printing on the flexible induction cooking area may become dirty or change its colour from sliding the cookware. You can clean the area in a standard way. 8.2 Cleaning the hob 21 otherwise, the dirt can cause damage to the hob. Take care to avoid burns.
www.aeg.com Problem Possible cause Remedy An acoustic signal sounds You put something on one and the hob deactivates. or more sensor fields. An acoustic signal sounds when the hob is deactivated. Remove the object from the sensor fields. The hob deactivates. Remove the object from the sensor field. You put something on the sensor field . Residual heat indicator does not come on. The zone is not hot because it operated only for a short time or the sensor is damaged.
ENGLISH Problem 23 Possible cause Remedy The diameter of the bottom of the cookware is incorrect for the activated function or function mode. Use cookware with a diameter applicable to the activated function or function mode. Use cookware with a diameter smaller than 160 mm on a single section of the flexible induction cooking area. Refer to "Flexible induction cooking area". comes on. Child Safety Device or Lock operates. Refer to "Daily use". comes on. There is no cookware on the zone.
www.aeg.com 9.2 If you cannot find a solution... surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate.
ENGLISH Number of cooking areas 1 Heating technology Induction Diameter of circular cooking zones (Ø) Middle front Right front Right rear 21.0 cm 14.5 cm 18.0 cm Lenght (L) and width (W) of the cooking area Left L 45.9 cm W 21.4 cm Energy consumption per cooking zone (EC electric cooking) Middle front Right front Right rear 177.0 Wh / kg 180.2 Wh / kg 174.6 Wh / kg Energy consumption of the Left cooking area (EC electric cooking) 182.
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ...............................................................................26 2. CONSIGNES DE SÉCURITÉ......................................................................................29 3. INSTALLATION..........................................................................................................31 4. DESCRIPTION DE L'APPAREIL.................................................................................33 5.
FRANÇAIS 27 dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • • • Ne faites pas fonctionner l'appareil avec un minuteur externe ou un système de commande à distance. AVERTISSEMENT : Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau. Éteignez l'appareil puis couvrez les flammes, par exemple avec un couvercle ou une couverture ignifuge.
FRANÇAIS 29 dispositifs de protection pour table de cuisson intégrés à l'appareil. L'utilisation de dispositifs de protection non adaptés peut entraîner des accidents. 2. CONSIGNES DE SÉCURITÉ 2.1 Installation AVERTISSEMENT! L'appareil doit être installé uniquement par un professionnel qualifié. AVERTISSEMENT! Risque de blessure corporelle ou de dommages matériels. • Retirez l'intégralité de l'emballage. • N'installez pas et ne branchez pas un appareil endommagé.
www.aeg.com • • • • • • d'alimentation. Contactez notre service après-vente agréé ou un électricien pour remplacer le câble d'alimentation s'il est endommagé. La protection contre les chocs des parties sous tension et isolées doit être fixée de telle manière qu’elle ne puisse pas être enlevée sans outils. Ne branchez la fiche d’alimentation à la prise de courant qu’à la fin de l’installation. Assurez-vous que la prise principale est accessible une fois l’appareil installé.
FRANÇAIS • Prenez soin de ne pas laisser tomber d'objets ou de récipients sur l'appareil. Sa surface risque d'être endommagée. • Ne faites jamais fonctionner les zones de cuisson avec des récipients de cuisson vides ou sans aucun récipient de cuisson. • Ne placez jamais de papier aluminium sur l'appareil. • N'utilisez pas de récipients en fonte ou en aluminium, ni de récipients dont le fond est endommagé et rugueux. Ils risqueraient de rayer le verre ou la surface vitrocéramique.
www.aeg.com AVERTISSEMENT! L'ensemble des branchements électriques doit être effectué par un technicien qualifié. ATTENTION! Ne percez et ne soudez jamais les extrémités des fils. Cela est strictement interdit ! Raccordement biphasé 1. Retirez le câble et la gaine des fils noir et marron. 2. Dénudez les extrémités des fils noir et marron. 3. Appliquez un nouvelle gaine de 1,5 mm² à chaque extrémité du câble. (nécessite un outil spécial).
FRANÇAIS 33 Si l'appareil est installé audessus d'un tiroir, la ventilation de la table de cuisson peut chauffer les éléments rangés dans le tiroir durant la cuisson. 4. DESCRIPTION DE L'APPAREIL 4.1 Description de la table de cuisson 3 1 1 1 Zone de cuisson à induction 2 Bandeau de commande 3 Zone de cuisson à induction flexible composée de quatre sections 1 2 4.
www.aeg.com TouFonction che sensitive Commentaire - Indicateur du niveau de cuisson Pour indiquer le niveau de cuisson. - Voyants du minuteur des zones de cuisson Pour indiquer la zone à laquelle se réfère la durée sélectionnée. - Affichage du minuteur Pour indiquer la durée, en minutes. Hob²Hood Pour activer et désactiver le mode manuel de la fonction. 9 Pause Pour activer et désactiver la fonction. 10 PowerBoost Pour activer et désactiver la fonction.
FRANÇAIS Écran d'affichage 35 Description Le récipient est inapproprié ou trop petit, ou bien il n'y a pas de récipient sur la zone de cuisson. Arrêt automatique est activée. / / PowerSlide est activée. 4.4 OptiHeat Control (Voyant de chaleur résiduelle à trois niveaux) AVERTISSEMENT! Les zones de cuisson à induction génèrent la chaleur nécessaire directement sur le fond des récipients de cuisson. La vitrocéramique est chauffée par la chaleur des récipients.
www.aeg.com Niveau de cuisson La table de cuisson s'éteint au bout de 6 heures ,1-3 4-7 5 heures 8-9 4 heures 10 - 14 1,5 heure 5.3 Niveau de cuisson Pour régler ou modifier le niveau de cuisson : Appuyez sur le niveau de cuisson souhaité sur le bandeau de sélection, ou déplacez votre doigt sur le bandeau de sélection jusqu'à atteindre le niveau de cuisson souhaité. pour la zone de cuisson à induction uniquement pour une durée limitée.
FRANÇAIS Lorsque la durée est écoulée, un signal sonore retentit et 00 clignote. La zone de cuisson se désactive. Cette fonction est sans effet sur le fonctionnement des zones de cuisson. 5.7 Pause Pour arrêter le signal sonore : appuyez sur . CountUp Timer (Minuteur progressif) Cette fonction permet de vérifier la durée de fonctionnement de la zone de cuisson sélectionnée.
www.aeg.com de cuisson. Appuyez sur 4 secondes. 5.11 Limitation de puissance pendant s'allume. Éteignez la table de cuisson en appuyant sur . Pour désactiver la fonction : allumez la table de cuisson en appuyant sur . Ne sélectionnez pas de réglage de niveau de cuisson. Appuyez sur 4 secondes. pendant . . ou s'allume. Appuyez sur pendant 4 secondes. Réglez le niveau de cuisson dans les 10 secondes qui suivent. Vous pouvez utiliser la table de cuisson.
FRANÇAIS • La fonction diminue la puissance des autres zones de cuisson raccordées à la même phase. • L'affichage du niveau de cuisson des zones à puissance réduite oscille entre deux niveaux. Fonction Gestionnaire de puissance avec la fonction Limitation de puissance Lorsque vous réglez la fonction Limitation de puissance sur 6,0 kW ou moins, la puissance de la table de cuisson est répartie entre toutes les zones de cuisson. 39 se trouvant sur la table de cuisson.
www.aeg.com Éclaira- Faire Faire frige auto- bouillir1) re2) matique Mode H6 Activé Vitesse Vitesse du venti- du ventilateur 2 lateur 3 1) La table de cuisson détecte le processus d'ébullition et sélectionne la vitesse du ventilateur en fonction du mode automatique. 2) La table de cuisson détecte le processus de friture et sélectionne la vitesse du ventilateur en fonction du mode automatique. 3) Ce mode active le ventilateur et l'éclairage, sans tenir compte sur la température.
FRANÇAIS 41 6. ZONE DE CUISSON À INDUCTION FLEXIBLE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 6.1 Fonction FlexiBridge La zone de cuisson à induction flexible est composée de quatre sections. Les sections peuvent être associées en deux zones de cuisson de taille différente ou en une seule grande zone de cuisson. Choisissez la combinaison de sections en sélectionnant le mode le plus adapté à la taille du récipient que vous souhaitez utiliser.
www.aeg.com Mauvaise position du récipient : Mauvaise position du récipient : 6.3 FlexiBridge Mode Big Bridge Pour activer ce mode, appuyez jusqu'à ce que le voyant de mode correspondant s'allume. Ce mode relie trois sections arrière en une seule zone de cuisson. La section avant n'est pas reliée et fonctionne comme une zone de cuisson séparée. Vous pouvez régler le niveau de cuisson séparément pour chaque zone. Utilisez les deux bandeaux de sélection de gauche. 6.
FRANÇAIS 43 Informations générales : Mauvaise position du récipient : • Le fond de l'ustensile doit présenter un diamètre minimal de 160 mm pour cette fonction. • L'affichage du niveau de cuisson pour le bandeau de sélection arrière gauche indique la position de l'ustensile sur la zone de cuisson à induction. Avant arrière 6.5 , milieu , . Fonction PowerSlide Cette fonction vous permet de régler la température en déplaçant l'ustensile à un autre endroit de la zone de cuisson à induction.
www.aeg.com Vous pouvez changer les niveaux de cuisson séparément pour chaque position. La table de cuisson se souviendra des niveaux de cuisson la prochaine fois que vous activerez cette fonction. Activation de la fonction Pour activer la fonction, posez correctement le récipient sur la zone de cuisson. Appuyez sur . Le voyant situé au-dessus du symbole s'allume.
FRANÇAIS 7.3 Öko Timer (Minuteur éco) Pour réaliser des économies d'énergie, la zone de cuisson se désactive automatiquement avant le signal du minuteur. La différence de temps de fonctionnement dépend du niveau et de la durée de cuisson. de cuisson n'est pas linéaire. Lorsque vous augmentez le niveau de cuisson, l'augmentation énergétique de la zone de cuisson n'est pas proportionnelle. Cela signifie que la zone de cuisson utilisée à un niveau de cuisson moyen utilise moins de la moitié de sa puissance.
www.aeg.com 7.5 Conseils pour Hob²Hood Lorsque vous faites fonctionner la table de cuisson avec la fonction : • Protégez le bandeau de commande de la hotte des rayons directs du soleil. • Ne dirigez pas de lumière halogène sur le bandeau de commande de la hotte. • Ne recouvrez pas le bandeau de commande de la table de cuisson. • Ne bloquez pas le signal entre la table de cuisson et la hotte (par exemple avec la main, la poignée d'un ustensile ou un grand récipient). Reportez-vous à l'image.
FRANÇAIS Veillez à ne pas vous brûler. Tenez le racloir spécial incliné sur la surface vitrée et faites glisser la lame du racloir pour enlever les salissures. • Une fois que la table de cuisson a suffisamment refroidi, enlevez : traces de calcaire et d'eau, projections de graisse, décolorations métalliques luisantes. Nettoyez la table de cuisson à l'aide d'un chiffon 47 humide et d'un détergent non abrasif. Après le nettoyage, séchez la table de cuisson à l'aide d'un chiffon doux.
www.aeg.com Problème Cause probable Solution La table de cuisson s'éteint. Vous avez posé quelque Retirez l'objet de la touche chose sur la touche sensitive sensitive. . Le voyant de chaleur résiduelle ne s'allume pas. La zone de cuisson n'est pas chaude parce qu'elle n'a fonctionné que peu de temps ou le capteur est endommagé. Si la zone de cuisson a eu assez de temps pour chauffer, faites appel à votre service après-vente agréé. Hob²Hood ne fonctionne pas.
FRANÇAIS Problème 49 Cause probable Solution Le diamètre du fond du récipient ne correspond pas à la fonction ou au mode de fonctionnement activés. Utilisez un récipient dont le fond est d'un diamètre adapté à la fonction ou au mode de fonctionnement activés. Utilisez un récipient dont le fond est d'un diamètre inférieur à 160 mm sur une seule section de la zone de cuisson à induction flexible. Reportez-vous au chapitre « Zone de cuisson à induction flexible ». s'allume.
www.aeg.com Problème et un chiffre s'affichent. Cause probable Solution Une erreur s'est produite dans la table de cuisson. Éteignez la table de cuisson et rallumez-la au bout de 30 secondes. Si s'affiche à nouveau, débranchez la table de cuisson de la prise électrique. Au bout de 30 secondes, rebranchez la table de cuisson. Si le problème persiste, contactez le service après-vente agréé. Un bip constant se déclenche. Le branchement électrique n'est pas adapté. 9.
FRANÇAIS 51 Zone de cuisson Puissance nominale (niveau de cuisson max.) [W] PowerBoost [W] PowerBoost Diamètre du rédurée maximale cipient [mm] [min] Avant droite 1400 2500 4 125 - 145 Arrière droite 1800 2800 10 145 - 180 Zone de cuisson 2300 à induction flexible 3200 10 minimum 100 La puissance des zones de cuisson peut légèrement différer des données du tableau. Elle dépend de la matière et des dimensions du récipient.
www.aeg.com EN 60350-2 - Appareils de cuisson domestiques électriques - Partie 2 : Tables de cuisson - Méthodes de mesure des performances 11.2 Économie d'énergie Vous pouvez économiser de l'énergie au quotidien en suivant les conseils suivants. • Si vous faites chauffer de l'eau, ne faites chauffer que la quantité dont vous avez réellement besoin. • Si possible, couvrez toujours les récipients de cuisson avec un couvercle pendant la cuisson.
DEUTSCH 53 INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE........................................................................................... 53 2. SICHERHEITSANWEISUNGEN.................................................................................56 3. MONTAGE................................................................................................................. 58 4. GERÄTEBESCHREIBUNG......................................................................................... 60 5.
www.aeg.com oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
DEUTSCH • • • • • • • • • • • 55 Sie vorsichtig und berühren Sie niemals die Heizelemente. Schalten Sie das Gerät nicht über eine externe Zeitschaltuhr oder eine separate Fernsteuerung ein. WARNUNG: Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. Versuchen Sie NIEMALS, ein Feuer mit Wasser zu löschen, sondern schalten Sie das Gerät aus und decken Sie die Flamme ab, z.B. mit einem Deckel oder einer Feuerlöschdecke.
www.aeg.com • WARNUNG: Verwenden Sie nur Schutzabdeckungen des Herstellers des Kochgeräts, von ihm in der Bedienungsanleitung als geeignete und empfohlene Schutzabdeckungen oder die im Gerät enthaltene Schutzabdeckung. Es besteht Unfallgefahr durch die Verwendung ungeeigneter Schutzabdeckungen. 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Die Montage des Geräts darf nur von einer qualifizierten Fachkraft durchgeführt werden. WARNUNG! Verletzungsgefahr sowie Risiko von Schäden am Gerät.
DEUTSCH • Verwenden Sie die Zugentlastung für das Kabel. • Stellen Sie beim elektrischen Anschluss des Gerätes sicher, dass das Netzkabel oder ggf. der Netzstecker nicht mit dem heißen Gerät oder heißem Kochgeschirr in Berührung kommt. • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker (falls vorhanden) und Netzkabel nicht zu beschädigen.
www.aeg.com entflammbaren Produkten benetzt sind, in das Gerät und stellen Sie solche nicht in die Nähe oder auf das Gerät. WARNUNG! Risiko von Schäden am Gerät. • Stellen Sie kein heißes Kochgeschirr auf das Bedienfeld. • Legen Sie keine heißen Topfdeckel auf die Glasoberfläche des Kochfeldes. • Lassen Sie das Kochgeschirr nicht leerkochen. • Lassen Sie keine Gegenstände oder Kochgeschirr auf das Gerät fallen. Die Oberfläche könnte beschädigt werden.
DEUTSCH Einbaumöbel und Arbeitsplatten betrieben werden. VORSICHT! Schließen Sie das Kabel nicht ohne Aderendhülse an. 3.3 Anschlusskabel • Das Kochfeld wird mit dem Anschlusskabel geliefert. • Ersetzen Sie das beschädigte Kabel nur durch ein geeignetes Ersatzkabel. Für weitere Informationen wenden Sie sich bitte an Ihren lokalen autorisierten Kundendienst. WARNUNG! Die elektrischen Anschlüsse müssen von einem qualifizierten Elektriker ausgeführt werden. Zweiphasiger Anschluss 1.
www.aeg.com 3.4 Montage Ist das Gerät über einer Schublade installiert, kann die Kochfeldbelüftung die in der Schublade aufbewahrten Gegenstände während des Garvorgangs erwärmen. min. 500mm min. 50mm 4. GERÄTEBESCHREIBUNG 4.
DEUTSCH 61 4.2 Bedienfeldanordnung 1 2 3 4 5 6 14 7 8 13 12 11 10 9 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen. SenFunktion sorfeld Kommentar 1 EIN/AUS Ein- und Ausschalten des Kochfeldes. 2 Verriegeln / Kindersicherung Verriegeln/Entriegeln des Bedienfelds. 3 PowerSlide Ein- und Ausschalten der Funktion. FlexiBridge Umschalten zwischen den drei Modi der Funktion.
www.aeg.com 4.3 Anzeigen der Kochstufen Display Beschreibung Die Kochzone ist ausgeschaltet. Die Kochzone ist eingeschaltet. - Pause ist aktiviert. Ankochautomatik ist aktiviert. PowerBoost ist aktiviert. + Zahl Eine Störung ist aufgetreten. / OptiHeat Control (Restwärmeanzeige, 3-stufig): Weitergaren/Warmhalten/Restwärme. / Verriegeln/Kindersicherung ist aktiviert. Das Kochgeschirr ist ungeeignet oder zu klein bzw. es befindet sich kein Kochgeschirr auf der Kochzone.
DEUTSCH 63 5.2 Abschaltautomatik Mit dieser Funktion wird das Kochfeld in folgenden Fällen automatisch ausgeschaltet: • Alle Kochzonen sind ausgeschaltet. • Nach dem Einschalten des Kochfelds wird keine Kochstufe gewählt. • Das Bedienfeld ist mehr als 10 Sekunden mit verschütteten Lebensmitteln oder einem Gegenstand bedeckt (Topf, Tuch usw.). Ein akustisches Signal ertönt und das Kochfeld schaltet ab. Entfernen Sie den Gegenstand oder reinigen Sie das Bedienfeld.
www.aeg.com Stellen Sie zuerst die Kochstufe für die Kochzone und erst danach die Funktion ein. Auswählen der Kochzone:Berühren Sie Wählen Sie die Kochzone mit aus. Die Kontrolllampe der Kochzone blinkt schneller. Im Display wird die Einschaltdauer der Zone angezeigt. wiederholt, bis die Kontrolllampe der gewünschten Kochzone aufleuchtet. Ausschalten der Funktion: Wählen Sie Einschalten der Funktion: Berühren Sie oder . Die Kontrolllampe der Kochzonen erlischt.
DEUTSCH Stellen Sie zuerst die Kochstufe ein. Einschalten der Funktion:Berühren Sie . leuchtet 4 Sekunden auf.Der Timer bleibt eingeschaltet. Ausschalten der Funktion: Berühren Sie . Die vorherige Kochstufe wird angezeigt. Diese Funktion wird auch ausgeschaltet, sobald das Kochfeld ausgeschaltet wird. 5.9 Kindersicherung Diese Funktion verhindert ein versehentliches Einschalten des Kochfelds. Einschalten der Funktion: Schalten Sie ein. Stellen Sie keine das Kochfeld mit Kochstufe ein.
www.aeg.com VORSICHT! Achten Sie darauf, dass die gewählte Leistungsstufe für die Sicherungen in der Hausinstallation geeignet ist. 5.12 Funktion Strommanagement • Die Kochzonen werden je nach Lage auf dem Kochfeld und Anzahl der Phasen gruppiert. Siehe Abbildung. • Jede Phase darf mit maximal 3600 W belastet werden. • Mit dieser Funktion wird die Leistung zwischen den einzelnen, an dieselbe Phase angeschlossenen Kochzonen aufgeteilt.
DEUTSCH Automatikmodi Automa- Kotische chen1) Einschaltung der Beleuchtung Braten2) Modus H0 Aus Aus Aus Modus H1 Ein Aus Aus Modus Ein Lüfterge- Lüftergeschwinschwindigkeit 1 digkeit 1 Modus H3 Ein Aus Modus H4 Ein Lüfterge- Lüftergeschwinschwindigkeit 1 digkeit 1 Modus H5 Ein Lüfterge- Lüftergeschwinschwindigkeit 1 digkeit 2 Modus H6 Ein Lüfterge- Lüftergeschwinschwindigkeit 2 digkeit 3 H2 3) Lüftergeschwindigkeit 1 1) Das Kochfeld erkennt, dass gekocht wird und regelt die Lüft
www.aeg.com 6. FLEXIBLE INDUKTIONSKOCHFLÄCHE WARNUNG! Siehe Kapitel Sicherheitshinweise. Stellen Sie Kochgeschirr mit einem Bodendurchmesser, der kleiner als 160 mm ist, mittig auf einen einzelnen Bereich. 6.1 Funktion FlexiBridge Die flexible Induktionskochfläche besteht aus vier Bereichen. Die Bereiche lassen sich zu zwei Kochzonen unterschiedlicher Größe oder zu einer großen Kochfläche zusammenschalten.
DEUTSCH Einstellskalen. linken Einstellskalen. Richtige Position des Kochgeschirrs: Richtige Position des Kochgeschirrs: 69 Um diesen Modus verwenden zu können, müssen Sie das Kochgeschirr auf die drei zusammengeschalteten Bereiche stellen. Wenn das Kochgeschirr nicht zwei Bereiche bedeckt, zeigt das Display an und die Kochzone wird nach 2 Minuten ausgeschaltet. Falsche Position des Kochgeschirrs: Falsche Position des Kochgeschirrs: 6.
www.aeg.com Richtige Position des Kochgeschirrs: Um diesen Modus verwenden zu können, müssen Sie das Kochgeschirr auf alle vier zusammengeschalteten Bereiche stellen. Wenn das Kochgeschirr nicht drei Kochfeld erkennt die Position des Kochgeschirrs und stellt die Kochstufe entsprechend der Position ein. Sie können das Kochgeschirr auf den vorderen, mittleren oder hinteren Bereich stellen. Der vordere Bereich hat die höchste Kochstufe.
DEUTSCH 71 Einschalten der Funktion Stellen Sie zum Einschalten der Funktion das Kochgeschirr auf die richtige Position der Kochfläche. Berühren Sie . Die Kontrolllampe über dem Symbol leuchtet. Wenn Sie kein Kochgeschirr auf die Kochfläche stellen, leuchtet nach 2 Minuten wird die flexible Induktionskochfläche auf und geschaltet. Ausschalten der Funktion Sie können die Kochstufe für jeden Bereich getrennt ändern.
www.aeg.com unterschiedlichen Materialien (Sandwichkonstruktion). • Summen: Sie haben die Kochzone auf eine hohe Stufe geschaltet. • Klicken: Elektrisches Umschalten . • Rauschen, Surren: Der Lüfter ist in Betrieb. Die Geräusche sind normal und weisen nicht auf eine Störung hin. 7.3 Öko Timer (Öko-Timer) Um Energie zu sparen, schaltet sich die Kochzonenheizung vor dem Signal des Kurzzeitmessers ab. Die Abschaltzeit hängt von der eingestellten Kochstufe und der Gardauer ab. Kochstufe 7.
DEUTSCH Kochstufe Verwendung: Dauer (Min.) 14 Aufkochen von Wasser, Nudeln kochen, Anbraten von Fleisch (Gulasch, Schmorbraten), Frittieren von Pommes frites. 73 Hinweise Aufkochen großer Mengen Wasser. PowerBoost ist eingeschaltet. 7.5 Tipps und Hinweise für Hob²Hood Wenn Sie das Kochfeld mit dieser Funktion betreiben: • Schützen Sie das Bedienfeld der Dunstabzugshaube vor direkter Sonneneinstrahlung. • Richten Sie keine Halogenstrahler auf das Bedienfeld der Dunstabzugshaube.
www.aeg.com • Kratzer oder dunkle Flecken auf der Oberfläche beeinträchtigen die Funktionsfähigkeit des Kochfelds nicht. • Verwenden Sie einen Spezialreiniger zur Reinigung der Kochfeldoberfläche. • Verwenden Sie einen speziellen Reinigungsschaber für Glas. Der Aufdruck auf der flexiblen Induktionskochfläche kann verschmutzen oder seine Farbe ändern, wenn das Kochgeschirr verschoben wird. Sie können den Bereich normal reinigen. 8.
DEUTSCH Störung Mögliche Ursache 75 Abhilfe Zwei oder mehr Sensorfelder Berühren Sie nur ein Sensorwurden gleichzeitig berührt. feld. Pause ist eingeschaltet. Siehe „Täglicher Gebrauch“. Auf dem Bedienfeld befinden sich Wasser- oder Fettspritzer. Wischen Sie das Bedienfeld ab. Ein akustisches Signal ertönt Mindestens ein Sensorfeld und das Kochfeld schaltet wurde bedeckt. ab. Wenn das Kochfeld ausgeschaltet wird, ertönt ein akustisches Signal. Entfernen Sie den Gegenstand von den Sensorfeldern.
www.aeg.com Störung Mögliche Ursache Abhilfe Die flexible Induktionskochfläche erwärmt das Kochgeschirr nicht. Das Kochgeschirr befindet sich nicht an der richtigen Stelle auf der flexiblen Induktionskochfläche. Setzen Sie das Kochgeschirr auf die richtige Stelle auf der flexiblen Induktionskochfläche. Die richtige Stelle für das Kochgeschirr hängt von der eingeschalteten Funktion oder dem Funktionsmodus ab. Siehe „Flexible Induktionskochfläche“.
DEUTSCH Störung Mögliche Ursache 77 Abhilfe und eine Zahl werden an- Es ist ein Fehler im Kochfeld aufgetreten. gezeigt. Schalten Sie das Kochfeld aus und nach 30 Sekunden wieder ein. Wenn erneut erscheint, trennen Sie das Kochfeld von der Spannungsversorgung. Schalten Sie nach 30 Sekunden das Kochfeld wieder ein. Tritt das Problem weiterhin auf, wenden Sie sich an den autorisierten Kundendienst. Es ist ein konstanter Piepton zu hören. Unsachgemäßer elektrischer Trennen Sie das Kochfeld Anschluss.
www.aeg.com Kochzone Nennleistung (höchste Kochstufe) [W] PowerBoost [W] PowerBoost maximale Einschaltdauer [Min.] Durchmesser des Kochgeschirrs [mm] Vorne rechts 1400 2500 4 125 - 145 Hinten rechts 1800 2800 10 145 - 180 Flexible Indukti- 2300 onskochfläche 3200 10 min. 100 Die Leistung der Kochzonen kann geringfügig von den Daten in der Tabelle abweichen. Sie ändert sich je nach Material und Abmessungen des Kochgeschirrs.
DEUTSCH • Wenn Sie Wasser erwärmen, verwenden Sie nur die benötigte Menge. • Decken Sie Kochgeschirr, wenn möglich, mit einem Deckel ab. • Stellen Sie Kochgeschirr auf die Kochzone, bevor Sie sie einschalten. • Stellen Sie kleineres Kochgeschirr auf die kleineren Kochzonen. 79 • Stellen Sie das Kochgeschirr mittig auf die Kochzone. • Nutzen Sie die Restwärme, um die Speisen warm zu halten oder zu schmelzen. 12. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol .
867350527-A-052019 www.aeg.