IKE85473FW USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION...........................................................................................8 5. DAILY USE.
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Seal the cut surfaces with a sealant to prevent moisture to cause swelling. • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window.
www.aeg.com • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Set the cooking zone to “off” after each use. • Do not rely on the pan detector. • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface.
ENGLISH 7 3. INSTALLATION WARNING! All electrical connections must be made by a qualified electrician. WARNING! Refer to Safety chapters. 3.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. CAUTION! Do not drill or solder the wire ends. This is strictly forbidden! Serial number ........................... CAUTION! Do not connect the cable without cable end sleeve. 3.
www.aeg.com 3.4 Assembly If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process. min. 500mm min. 50mm 4. PRODUCT DESCRIPTION 4.
ENGLISH 9 4.2 Control panel layout 1 2 3 4 5 6 7 12 11 13 10 9 8 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment 1 ON / OFF 2 Lock / Child Safety Device To lock / unlock the control panel. 3 PowerSlide To activate and deactivate the function. FlexiBridge To switch between three modes of the function. - Heat setting display To show the heat setting.
www.aeg.com Display Description The cooking zone operates. - Pause operates. Automatic Heat Up operates. PowerBoost operates. + digit There is a malfunction. / OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual heat. / Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates. / / PowerSlide operates. 4.
ENGLISH deactivates. Remove the object or clean the control panel. • the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. • you use incorrect cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. • you do not deactivate a cooking zone or change the heat setting. After some time comes on and the hob deactivates.
www.aeg.com remaining time counts back to 00. The indicator of the cooking zone goes out. When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates. To stop the sound: touch . CountUp Timer (The count up timer) You can use this function to monitor how long the cooking zone operates. To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. To activate the function: touch of the timer. comes on.
ENGLISH deactivate the hob with operates again. the function 5.10 OffSound Control (Deactivating and activating the sounds) Deactivate the hob. Touch for 3 seconds. The display comes on and goes out. Touch for 3 seconds. or comes on. Touch of the timer to choose one of the following: • - the sounds are off - the sounds are on • To confirm your selection wait until the hob deactivates automatically.
www.aeg.com 6. FLEXIBLE INDUCTION COOKING AREA WARNING! Refer to Safety chapters. 6.1 FlexiBridge function The flexible induction cooking area consists of four sections. The sections can be combined into two cooking zones with different size, or into one large cooking area. You choose the combination of the sections by choosing the mode applicable to the size of the cookware you want to use. There are three modes: Standard (activated automatically when you activate the hob), Big Bridge and Max Bridge.
ENGLISH > 160 mm 6.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones. You can set the heat setting for each zone separately. Use two left side control bars. Correct cookware position: 15 6.3 FlexiBridge Big Bridge mode To activate the mode touch until you see the correct mode indicator . This mode connects three rear sections into one cooking zone.
www.aeg.com 6.4 FlexiBridge Max Bridge mode To activate the mode touch until you see the correct mode indicator . This mode connects all sections into one cooking zone. To set the heat setting use any of the two control bars on the left side. Correct cookware position: To use this mode you have to place the cookware on the four connected sections. If you use cookware smaller 6.
ENGLISH 17 You can change the heat settings for each position separately. The hob will remember your heat settings next time you activate the function. Activating the function . To activate the function place the cookware in the correct position on the • Heat setting display for the left front control bar shows the heat setting. To change the heat setting use left front control bar.
www.aeg.com Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone. Refer to "Technical data". 7.2 The noises during operation If you can hear: • crack noise: cookware is made of different materials (a sandwich construction).
ENGLISH Heat setting Use to: Time (min) Hints 9 - 12 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts. as necessary Turn halfway through. 12 - 13 Heavy fry, hash browns, loin steaks, steaks. 5 - 15 Turn halfway through. 14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips. 19 Boil large quantities of water. PowerBoost is activated. 8. CARE AND CLEANING WARNING! Refer to Safety chapters. 8.
www.aeg.com 9.1 What to do if... Problem Possible cause You cannot activate or oper- The hob is not connected to ate the hob. an electrical supply or it is connected incorrectly. Remedy Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. You do not set the heat setting for 10 seconds.
ENGLISH 21 Problem Possible cause Remedy There is no sound when you touch the panel sensor fields. The sounds are deactivated. Activate the sounds. Refer to "Daily use". The flexible induction cooking area does not heat up the cookware. The cookware is in a wrong position on the flexible induction cooking area. Place the cookware in the correct position on the flexible induction cooking area. The position of the cookware depends on the activated function or function mode.
www.aeg.com Problem and a number come on. Possible cause Remedy There is an error in the hob. Deactivate the hob and activate it again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre. You can hear a constant beep noise. The electrical connection is incorrect. 9.2 If you cannot find a solution... Disconnect the hob from the electrical supply.
ENGLISH The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware. 23 For optimal cooking results use cookware no larger than the diameter in the table. 11. ENERGY EFFICIENCY 11.
www.aeg.com product to your local recycling facility or contact your municipal office. appliances marked with the symbol with the household waste.
ENGLISH 25
www.aeg.
ENGLISH 27
867350405-A-472018 www.aeg.