IPE64571FB USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................7 4. PRODUCT DESCRIPTION...........................................................................................8 5. DAILY USE.
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH • Follow the installation instructions supplied with the appliance. • Keep the minimum distance from other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Seal the cut surfaces with a sealant to prevent moisture to cause swelling. • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window.
www.aeg.com • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Set the cooking zone to “off” after each use. • Do not rely on the pan detector. • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface.
ENGLISH 7 3. INSTALLATION WARNING! Refer to Safety chapters. 620 280 3.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. 590+1 Serial number ........................... 3.2 Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards. min. min. 12 60 3.
www.aeg.com 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 3 1 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 2 4.2 Control panel layout 6 7 5 4 3 8 2 1 9 10 11 To see the control panel and the zone positions activate the appliance with Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
ENGLISH Sensor Function field Comment PowerSlide To activate and deactivate the function. Control bar To set a heat setting. 10 PowerBoost To activate the function. 11 Lock / Child Safety Device To lock / unlock the control panel. 8 9 - 4.3 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicators show the level of the residual heat for the cooking zones you are currently using.
www.aeg.com Heat setting The hob deactivates after 5 4 hours 6-9 1.5 hours 5.3 Using the cooking zones CAUTION! Do not place hot cookware on the control panel. There is a risk of damage to the electronic parts. Place the cookware in the centre of the selected zone. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. remove the pot. The control bar blinks for the second half of that time.
ENGLISH Touch to activate the function for the cooking zone. The function deactivates automatically. For maximum duration values, refer to "Technical data". The function starts automatically after 4 seconds. When you set the function, you can remove the pot. When the time comes to an end, a signal sounds and flashes. Touch stop the signal. to 5.7 Timer To deactivate the function: touch Count Down Timer indicators Set the heat setting for the appropriate cooking zone and then set the function. 1.
www.aeg.com The control bars disappear. Deactivate the hob. When you deactivate the hob, the function is still active. To deactivate the function for only one cooking time: Activate the hob with . comes on. Touch until signal sounds and the indicator comes off. The control bar appears. Set the heat setting within 50 seconds.You can operate the hob. When you deactivate the hob with the function is still active.
ENGLISH Auto- Boiling1) Frying2) matic light Mode H6 On Fan speed 2 vates the fan speed in accordance with the automatic mode. 3) This mode activates the fan and the light and does not rely on the temperature. Changing the automatic mode 1. Deactivate the appliance. for 3 seconds. 2. Touch The display comes on and goes off. 3. Touch for 3 seconds. 4. Touch on.
www.aeg.com Diameter and position of the cookware Use two left side control bars. Choose the mode applicable to the size and the shape of the cookware. The cookware should cover the selected area as much as possible. Place the cookware centrally on the selected area! Place the cookware with the bottom diameter smaller than 160 mm centrally on a single section.
ENGLISH 15 Correct cookware position: To use this mode you have to place the cookware on the three connected sections. If you use cookware smaller than two sections the control bar blinks and after 2 minutes the zone switches off. Incorrect cookware position: Incorrect cookware position: 6.5 6.4 FlexiBridge Max Bridge mode To activate the mode touch until you see the correct mode indicator . This mode connects all sections into one cooking zone.
www.aeg.com Use only one pot when you operate the function. If you want to change the heat setting, lift up the cookware and place it on a different zone. Sliding the cookware can cause scratches and discolouration of the surface. General information: • 160 mm is the minimum bottom diameter of the cookware for this function. • If you place the pot in the front position, lights up on the control panel. The control bar displays the default heat setting .
ENGLISH Refer to "Technical data". 7.2 The noises during operation If you can hear: • crack noise: cookware is made of different materials (a sandwich construction). • whistle sound: you use a cooking zone with a high power level and the cookware is made of different materials (a sandwich construction). • humming: you use a high power level. • clicking: electric switching occurs. • hissing, buzzing: the fan operates. The noises are normal and do not indicate any malfunction. 17 count down timer sounds.
www.aeg.com Heat setting Use to: Time (min) Hints 6-7 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts. as necessary Turn halfway through. 7-8 Heavy fry, hash browns, loin steaks, steaks. 5 - 15 Turn halfway through. 9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips. Boil large quantities of water. PowerBoost is activated. 7.
ENGLISH • Always use cookware with a clean base. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner suitable for the surface of the hob. • Use a special scraper for the glass. The printing on the flexible induction cooking area may become dirty or change its colour from sliding the cookware. You can clean the area in a standard way. 8.2 Cleaning the hob 19 otherwise, the dirt can cause damage to the hob. Take care to avoid burns.
www.aeg.com Problem Possible cause Remedy You cannot select the maximum heat setting for one of the cooking zones. The other zones consume the maximum available power. Your hob works properly. Reduce the heat setting of the other cooking zones connected to the same phase. Refer to "Power management". An acoustic signal sounds You put something on one and the hob deactivates. or more sensor fields. An acoustic signal sounds when the hob is deactivated. Remove the object from the sensor fields.
ENGLISH Problem 21 Possible cause Remedy The diameter of the bottom of the cookware is incorrect for the activated function or function mode. Use cookware with a diameter applicable to the activated function or function mode. Use cookware with a diameter smaller than 160 mm on a single section of the flexible induction cooking area. Refer to "Flexible induction cooking area". Child Safety Device or Lock operates. Refer to "Daily use".
www.aeg.com 9.2 If you cannot find a solution... servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the 10. TECHNICAL DATA 10.
ENGLISH Diameter of circular cooking zones (Ø) Right front Right rear 14.5 cm 18.0 cm Lenght (L) and width (W) of the cooking area Left L 41.8 cm W 24.8 cm Energy consumption per cooking zone (EC electric cooking) Right front Right rear 187.5 Wh / kg 174.6 Wh / kg Energy consumption of the Left cooking area (EC electric cooking) 187.0 Wh / kg Energy consumption of the hob (EC electric hob) 184.
867350054-A-502018 www.aeg.
