Convection Oven User Manual

SYMBOL FUNCTION DESCRIPTION

TIME OF DAY Shows the time. To set, change or check the time. Refer to

"Setting and changing the time of day".

Setting the clock

1. Activate the appliance and set an oven function and temperature (not necessary for

Minute minder and Time of day).

2. Touch

again and again until the display shows the necessary clock function and

the related symbol, for example Minute minder .

3. Touch

or to set the necessary time.

When the set time ends, an acoustic signal sounds for 2 minutes. “00.00” goes on in the

display and the related function indicator flashes. The appliance deactivates automatical-

ly. Touch a sensor field to stop the acoustic signal.

General instruction:

• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5

seconds, touch or to set the time.

• If you set the time, the symbol continues to flash for approximately 5 seconds. After

these 5 seconds, the symbol comes on. The time starts to count down for Minute mind-

er. For Duration and End the time starts to count down after the function starts.

• If you want to delay the start of the cooking time use End function

• If you want to end cooking earlier (before end of clock functions) use

AUTOMATIC PROGRAMMES

WARNING!

Refer to "Safety information" chapter.

Automatic Programmes

For an automatic programme, use the recipes from section "Automatic programmes".

Setting a programme

1. Activate the appliance.

2. Use to access the automatic programmes menu.

3. Use

or to set an automatic programme (P1 to P12).

– The symbol for the function comes on in the display.

– The cooking time and

come on in the display.

– Touch the clock control

. Then, touch the or control to set the cooking time.

– The oven activates automatically after approximately 5 seconds.

When set time ends, an acoustic signal sounds for 2 minutes.

flashes. The oven stops

automatically. Touch a control to stop the acoustic signal.

Automatic programmes