User manual

Getting started
1. Setting/changing time. Plug in the
machine,thedisplaywillashthe
initial time showing: 12:00. Press the
HOUR and MIN button to set the
required time. Time can be changed
at any time, even under program
mode. Simply press the HOUR and
MIN button, the time changes at once.
Note: if you unplug the machine, the
time needs so be set again.
2. Placethemachineonaatsurface.
When starting the machine for the
rst time, ll the tank with cold water.
Start the machine with the ON/OFF
switch. Let a full tank of water pass
through the machine once or twice to
clean it, without using a paper lter or
coee.
3. Making coee: open the lid and ll
the water tank with fresh cold water
up to the desired level. There is a
water level indicator on the water
tank and on the coee jug. (The
machine must not be used with
empty tank!)
4. Insert a size 1x4 paper lter in
the lter holder and ll it with
ground coee. There is a gauge for
recommended number of spoons of
coee next to the water gauge. For
average strong coee 1 measuring
spoon (approx. 6-7 g) per cup is
sucient. Close the water tank lid and
place the jug back (complete with lid).
6. Changing the delay time. Press
and hold the PROGRAM button for 3
seconds.Thedisplayashesandthe
PROGRAM button light turns o. Set
hours by pressing the HOUR button.
Then set minutes by pressing the MIN
button. Press the PROGRAM button
again to conrm.
GB
5. Setting delay time. Press the
PROGRAMbutton,thedisplayashes.
Set hours by pressing the HOUR
button. Then set minutes by pressing
the MIN button. Press the PROGRAM
button again to conrm. The display
will go back to show the current time
after 5 seconds.
D
GR
NL
F
GB
15