KFA58DIO USER MANUAL EN User Manual Hob
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................6 4. PRODUCT DESCRIPTION...........................................................................................9 5. DAILY USE.
ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.aeg.com • • • • • • • • CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector.
ENGLISH the appliance when the door or the window is opened. • Each appliance has cooling fans on the bottom. • If the appliance is installed above a drawer: – Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system. – Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer. 2.2 Electrical Connection WARNING! Risk of fire and electric shock.
www.aeg.com • If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock. • Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation. • When you place food into hot oil, it may splash. can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface.
ENGLISH Serial number ........................... 7 3.6 Attaching the seal During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. 1. Clean the worktop around the cut out area. 2. Attach the supplied seal stripe to the lower edge of the hob along the outer edge of the glass ceramic. Do not extend it.
www.aeg.com 4. ON-TOP INSTALLATION 1. min. 12 mm R 5mm min. 55mm 490+1mm 560+1mm INTEGRATED INSTALLATION 1. 2. R10 mm R5 mm 8 mm 13 mm 490+1 mm 516+1 mm min.55mm 560+1 mm 586+1 mm 2. 3. min. 28 mm min.
ENGLISH 9 3. min. 12 mm 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 1 1 1 Induction cooking zone 2 Control panel 265 mm 180 mm 170 mm 1 145 mm 210 mm 1 2 4.2 Control panel layout 1 2 3 4 10 5 6 9 8 7 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
www.aeg.com Sensor Function field Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / Child Safety Device To lock / unlock the control panel. 3 Pause To activate and deactivate the function. - Heat setting display To show the heat setting. - Timer indicators of cooking To show for which zone you set the time. zones - Timer display To show the time in minutes. - To select the cooking zone. - To increase or decrease the time. PowerBoost To activate the function.
ENGLISH 4.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. If a given zone becomes too hot the function may lower the heat setting for neighbouring zones. 11 The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 5. DAILY USE WARNING! Refer to Safety chapters. 5.
www.aeg.com To activate the function for a cooking To see the remaining time: set the zone: touch ( comes on). Immediately touch a desired heat cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. setting. After 3 seconds comes on. To deactivate the function: change the heat setting. To change the time: set the cooking 5.
ENGLISH To stop the sound: touch To override the function for only one . cooking time: activate the hob with The function has no effect on the operation of the cooking zones. This function sets all cooking zones that operate to the lowest heat setting. When the function operates, all other symbols on the control panels are locked. The function does not stop the timer functions. comes on. The heat setting is lowered to 1. . The 5.9 Lock You can lock the control panel while cooking zones operate.
www.aeg.com reduced zones stays on the reduced heat setting. 6. HINTS AND TIPS WARNING! Refer to Safety chapters. 6.1 Cookware For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with suitable cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain.
ENGLISH 6.4 Examples of cooking applications The correlation between the heat setting of a zone and its consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the consumption of power. It Heat setting 15 means that a cooking zone with the medium heat setting uses less than a half of its power. The data in the table is for guidance only. Use to: Time (min) Hints Keep cooked food warm. as necessary Put a lid on the cookware.
www.aeg.com • Use a special scraper for the glass. stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth. • Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth. 7.2 Cleaning the hob • Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns.
ENGLISH 17 Problem Possible cause Remedy Residual heat indicator does not come on. The zone is not hot because it operated only for a short time or the sensor is damaged. If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre. Automatic Heat Up does not The zone is hot. operate. Let the zone become sufficiently cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels.
www.aeg.com 8.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period.
ENGLISH Diameter of circular cooking zones (Ø) Left front Left rear Right front 21.0 cm 18.0 cm 14.5 cm Lenght (L) and width (W) of non circular cooking zone Right rear L 26.5 cm W 17.0 cm Energy consumption per cooking zone (EC electric cooking) Left front Left rear Right front Right rear 178.4 Wh / kg 184.9 Wh / kg 183.2 Wh / kg 184.9 Wh / kg Energy consumption of the hob (EC electric hob) 182.
www.aeg.com labour and travel. The guarantee will lapse if the operating instructions and conditions of use are not adhered to, if the product is incorrectly installed, or in the event of damage caused by external influences, force majeure, intervention by third parties or the use of non-genuine components. 12. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it.
ENGLISH 21
www.aeg.
ENGLISH 23
867346257-B-042019 www.aeg.