KFA58SIM EN INDUCTION HOB USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 7 9 12 13 14 15 15 Safety information Installation instructions Product description Operating instructions Helpful hints and tips Care and cleaning What to do if… Environment concerns Garantie, Garanzia, Guarantee The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice.
Safety information SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.
Installation instructions • • • • 5 Do not let cookware boil dry to prevent the damage to cookware and glass . Do not use the cooking zones with empty cookware or without cookware. Do not put the aluminium foil on the appliance. Make sure that the airflow space of 5 mm between the worktop and front of the unit below it stays opened. WARNING! If there is a crack on the surface, disconnect power supply to prevent the electrical shock.
Installation instructions WARNING! Risk of injury from electrical current. Carefully obey the instructions for electrical connections. • • • • • • • The electrical mains terminal is live. Make electrical mains terminal free of voltage. Install correctly to give shock protection. Loose and incorrect plug and socket connections can make the terminal become too hot. A qualified electrician must install the connections in the clamps correctly. Use a strain relief clamp on cable.
Product description min. 25 mm min. 5 mm min. 20 mm 7 min. 38 mm min. 5 mm If you use a protection box (the additional accessory1)), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. PRODUCT DESCRIPTION General overview 1 2 180 180 210 145 mm mm 5 mm mm 4 3 1 Induction cooking zone 1800 W, with Power function 2800 W (minimum cookware diameter =145mm).
Product description Control panel layout 1 2 3 10 4 9 5 6 7 8 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
Operating instructions Display 9 Description The Automatic Switch Off operates. Residual heat indicator WARNING! The risk of burns from residual heat! The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware. OPERATING INSTRUCTIONS Activation and deactivation Touch for 1 second to activate or deactivate the appliance.
Operating instructions Automatic Heat Up You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the illustration), and then decreases to the necessary heat setting. To start the Automatic Heat Up function for a cooking zone: . The symbol comes on in the 1. Touch display. 2. Immediately touch . The symbol comes on in the display. 3.
Operating instructions 11 • To deactivate the Timer: set the cooking zone with and touch to deactivate the Timer. The remaining time counts back to 00 . The indicator of the cooking zone goes out. • To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates.
Helpful hints and tips HELPFUL HINTS AND TIPS Use the induction cooking zones with correct cookware. Cookware for induction cooking zones For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Care and cleaning Heat setting Use to: Time 10-40 min 13 Hints 1-2 Solidify: fluffy omelettes, baked eggs Cook with a lid on 2-3 Simmer rice and milkbased dishes, heat- 25-50 ing up ready-cooked meals min Add the minimum twice as much liquid as rice, mix milk dishes part procedure through 3-4 Steam vegetables, fish, meat 20-45 min Add some tablespoons of liquid 4-5 Steam potatoes 20-60 min Use max.
What to do if… 2. 3. Clean the appliance with a moist cloth and some detergent. At the end rub the appliance dry with a clean cloth. WHAT TO DO IF… Problem Possible cause and remedy You cannot activate the appliance or operate it. • Activate the appliance again and set the heat setting in 10 seconds. • You touched 2 or more sensor fields at the same time. Only touch one sensor field. • The Child Safety Device or the Lock or Stop+Go operates. See the chapter Operating instruction.
Environment concerns Problem comes on 15 Possible cause and remedy There is an error in the appliance, because a cookware boils dry. The protection against become too hot for the cooking zone operates. The Automatic Switch Off operates. Deactivate the appliance. Remove the hot cookware. After, approximately 30 seconds activate the cooking zone again. should go out of the display, residual heat indicator can stay.
Servicestellen Points de Service Servizio dopo vendita Point of Service 9000 St. Gallen Zürcherstrasse 204e 4052 Basel St. Jakob-Turm Birsstrasse 320B 6020 Emmenbrücke Seetalstrasse 11 7000 Chur Comercialstrasse 19 Ersatzteilverkauf/Points de vente de rechange/Vendita pezzi di ricambio/spare parts service: 5506 Mägenwil, Industriestrasse 10, Tel. 0848 848 111 Fachberatung/Verkauf/Demonstration/Vente/Consulente (cucina)/Vendita 8048 Zürich, Badenerstrasse 587, Tel.
www.aeg.
