Congratulations on your purchase of the AEG KG8.04 Gas hob. Before putting the hob into use, we advise that you read through this instruction book, to familiarize yourself with the control functions. GUARANTEE This appliance is guaranteed for a period of 12 months, from date of purchase, o the first purchaser.
GAS HOB — MODEL KG6.04 — CONTROL PANEL Ultra-fast churner contra knot 2 Fast burner contort knob 3 Push button for the electric lighter for the gas burners 4 Fast burner control knob 5 Semi-fast burner control knob.
USING THE GAS BURNERS OPERATION A guide mark above each control indicates which busier is being used. Each burner is supplied with gas by a tap which incorporates a safety ch ar stow burning position. o1t High Fame Low Flame intermediate positions are avsiizhle between the high and low points on the control. LIGHTING THE BURNERS Lightly depress the knob and turn it anti-clockwise.
i~ .
MAINTENANCE THE STAINLESS STEEL PAN SUPPORT The stainless steel pan support over the burners will inevitably become discolored due to the rise in temperature. However, you can reduce this discoloring and maintain the grill at its proper appearance by rubbing it over with a scouring cloth and an abrasive powered. BURNER CAPS These hare been fitted in a simple way, in order that they are easily removed for lea nine. Simply sift and clean them with a damp soapy sponge, remove stubborn stains with «digs.
INSTALLATION N.B. : A Grey rubber seal is supplied with the hob and must be fitted around the vertical edging slang all four sides of the hob. This ensures that the appliance is pro reply water-tight and sealed against the worktop.
GAS CONNECTION Appliances incorporated Frito kitchen units must he connected to rigid piping. Cooking hobs for bulling in are therefore supplied without & nozzle for a flexible tube. The connection must be made by rigid posing beyond a double-unionism. ADJUSTING THE BURNERS The hob is only manufactured for use with natural gas. Alternative gas types must not be connected REMOVING THE WORKING SURFACE Remove the knobs with the aid of a cloth wrapped round the Bakelite part.
GREASING THE TAPS TOP TAPS The grease on the taps should be renewed regular and particularizes soon as they show any abnormal resistance to handling, Unless this is done, the taps may jam and become unmissable Tums of the gas infer tap and then after removing the knob, — remove the two located oo either wide of the button: remove the by inside the cove, and then the core itself s the spring locate with a clean cloth, wipe the old grease off the core and in the body, making particularity sure that the edges
The electric ignition is connected up for 240 V. IMPORTANT It is essential that ali regulations of your focal Electricity Board in respect of the connection of electric cookers are complied with and that your new cooker is connects by a qualified electrician. ATTENTION : The surfaces of heating and cooking appliances get hot during opera son — take care and keep young children away. BURNER CHARACTERISTICS (NAT. GAS SUPPLY) Heat output Gas consumption Burner type Bta/ br Cuff b SEMI-FAST BURNER 5000 A4.
Alt details are given by way of indication, Whilst always concerned about the quality of its products, AEG reserves the right to modify its appliances at any time. GAS HOB KG6.