User manual

g
13
Working with the mixer/
processor
1
When the mixer is attached to the
processor stand, the mixing bowl is
automatically switched on when the
mixer is switched on.
1
The appliance can be used for up to
10 minutes without stopping. It should
be allowed to cool each time following
prolonged, continuous operation (for
at least 20 minutes after using for
10 minutes without stopping).
1
Maximum processing quantities:
Processing in the mixing bowl must not
exceed 1.5 kg solid or 1.75 l liquid
foodstuffs.
Switching the mixer ON
(Figure 6)
0 Select the speed range with the speed
range selector switch (Figure 1+6/C):
0 The ON/OFF switch (Figure 1+6/B) is
used to:
– switch the mixer ON and OFF,
– control the mixer speed (5 speed set-
tings) in the pre-selected speed
range.
0 As long as the Pulse button (Figure
1+6/D) is pressed and held when the
appliance is in operation, the mixer
operates at its maximum speed.
Selecting the mixing bowl speed
(Figure 7)
The mixing bowl has two speed set-
tings.
0 The mixing bowl speed selector switch
(Figure 1/H) is used to select the mixing
bowl speed:
I = low speed
II = high speed
Switching the mixer OFF
0 Slide the ON/OFF switch (Figure 1+6/B)
to "0".
– The mixer and mixing bowl are
switched off.
Selecting the correct settings
The following notes can be used as a guide.
Mixer speed
3
Start all types of processing at a low speed. This will avoid powdery foods and liquids
spraying out.
low speeds, or
high speeds.
Speed range selector switch
(Figure 1+6/C)
ON/OFF switch
(Figure 1+6/B)
•Kneading, Mixing:
start with 1 or 2,
than speed up to 5
• Folding in: 3, 4
• Stirring:
start with 2 or 3,
than speed up
• Whisking, Frothing: 4 or 5
or button (Figure 1+6/D)
822_949_233 KM400.book Seite 13 Freitag, 10. Februar 2006 6:14 18