User manual

5.4 Display
A B C
D
EFG
A) Timer
B) Heat-up and residual heat indicator
C) Microwave function
D) Core temperature sensor (selected
models only)
E) Door lock (selected models only)
F) Hours / minutes
G) Clock functions
5.5 Buttons
Button Function Description
CLOCK To set a clock function.
MINUS To set the time.
MICROWAVE To set the Microwave function. Hold the
button for more than 3 seconds to acti-
vate or deactivate the oven lamp.
PLUS To set the time.
TEMPERATURE To check the oven temperature or the
temperature of the core temperature sen-
sor (if applicable). Use only while an oven
function is in operation.
5.6 Heat-up indicator
When you activate an oven function, the
bars in the display come on one by
one. The bars show that the oven
temperature increases or decreases.
6. MICROWAVE MODE
6.1 Setting the Microwave
function
Do not let the appliance operate when
there is no food in it.
1. Turn the knob for the oven functions
to select the Microwave function .
The display shows a default microwave
power and then a default value of the
Duration function.
2. Press and turn the knob for the
temperature / microwave power to
change the microwave power
settings. The power settings changes
in 100 W steps.
3. Press and then / to change
the Duration settings.
The appliance automatically starts to
operate after few seconds. When the set
time ends, an acoustic signal sounds and
the Microwave function deactivates
automatically.
4. Turn the knob for the oven functions
to the off position.
When the Microwave function is running
you can:
www.aeg.com10