User manual

If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90% of the set time.
The appliance uses the residual
heat to continue the cooking
procedure until the time ends.
The residual heat can last from 3
to 20 minutes.
Setting the clock functions:
1.
Set a heating function.
2.
Touch again and again until the
display shows the necessary clock
function and the related symbol.
3.
Touch or to set the necessa-
ry time. Touch OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4.
Touch a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time , the ap-
pliance deactivates automatically.
• With Duration and End Time , you
must set the heating function and the
temperature first. Then you can set the
clock function.
• You can use Duration and End Time at
the same time if you want to automati-
cally activate and deactivate the appli-
ance at a given time later.
8.2 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate the
function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function stays on if you
change the heating functions.
8.3 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• It is applicable for all heating functions
with Duration or Weight Automatic.
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2.
The display shows the message for
Extra Time for one minute.
3.
Press to activate (or to cancel).
4.
Set the Extra Time period. Press OK
to confirm.
9. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
9.1 Automatic programmes
These automatic programmes give the
optimum settings for each type of meat
or other recipes:
18
www.aeg.com