User manual

Failure to maintain the appliance in a clean condition
could lead to deterioration of the surface that could
adversely affect the life of the appliance and possibly
result in a hazardous situation.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can
scratch the surface, which may result in shattering of
the glass.
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
Ensure that the appliance is switched off before re-
placing the lamp to avoid the possibility of electric
shock.
2. CONDITIONS OF USE
This appliance is intended to be used in
household and similar applications such
as:
Farm houses
By clients in serviced apartments, holi-
day apartments and other residential
type environments
3.
SAFETY INSTRUCTIONS
3.1 Installation
WARNING!
Only a qualified person must in-
stall this appliance.
Remove all the packaging.
Do not install or use a damaged appli-
ance.
Obey the installation instruction sup-
plied with the appliance.
Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
Do not pull the appliance by the han-
dle.
Keep the minimum distance from the
other appliances and units.
Make sure that the appliance is instal-
led below and adjacent safe struc-
tures.
ENGLISH 5