User manual

When you use the function:
Manual, the appliance uses
the automatic settings. You
can change them as with
other functions.
9.3 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press to confirm.
3. Select the category and dish. Press
to confirm.
4. Touch or to set the food
weight. Press to confirm.
The automatic programme starts.
5. You can change the weight at any
time. Press or to change the
weight.
6. When the time ends, an acoustic
signal sounds. Press any symbol to
deactivate the signal.
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.
10. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
10.1 Inserting the accessories
Use only suitable cookware and material.
WARNING!
Refer to "Microwave mode"
chapter.
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray:
Push the baking tray between the guide
bars of the shelf support.
Wire shelf and baking tray together:
Push the baking tray between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
All accessories have small
indentations at the top of
the right and left side to
increase safety. The
indentations are also anti-tip
devices.
The high rim around the
shelf is a device which
prevents cookware from
slipping.
www.aeg.com20