User manual

Other things to think about…
Food items have different shapes and
qualities. They are prepared in
different quantities. Because of this,
the necessary time and power for
defrosting, heating or cooking can
vary. As a rough guide: double the
quantity - almost double the time.
The microwave creates the heat
directly in the food. Because of this,
all places cannot be heated at the
same time. You must stir or turn the
heated dishes, especially when
preparing larger quantities of food.
The standing time is given in the
tables. Let the food stand, in the
appliance or outside it, so that the
heat is distributed more evenly.
Adjust the power level according to
food quantity. Using high power level
with small amount of food can burn
the food or generate arcing when you
use the accessories.
You get better results for rice if you
use flat, wide dishes.
6.4 Setting the Microwave
function
1. Turn the knob for the oven functions
to select the Microwave function
.
The display shows a default microwave
power and then a default value of the
Duration function.
2. To change the microwave power
settings, turn the knob for the
temperature / microwave power. The
power setting changes in 100 Watt
steps.
3. Press and then / to change
the Duration settings.
The appliance automatically starts to
operate after few seconds. When the set
time ends, an acoustic signal sounds and
the Microwave function deactivates
automatically.
4. Turn the knob for the oven functions
to the off position.
When the Microwave function is running
you can:
change the power settings.
check the power settings. Press .
When you open the oven
door, the function stops. To
start it again, press .
6.5 Setting the Combi function
You can add the microwave function to
any of the heating functions.
Use it to operate the heating function
and the microwave mode together. Use
it to cook food in a shorter time and
brown it at the same time.
1. Turn the function knob to select an
oven function.
The display shows a default temperature.
2. Change the temperature.
3. Press
. Refer to "Setting the
Microwave function" and start from
step 2. Please note that the
microwave function will start as soon
as the set temperature is reached.
When you use the
Microwave function with the
function Duration for more
than 7 minutes and in Combi
mode, the Microwave power
cannot be more than 600 W.
Around 5 degrees before the set
temperature is reached an acoustic
signal sounds. When the set time ends,
an acoustic signal sounds again and the
oven function and Microwave function
deactivates automatically.
4. Turn the function knob to off
position.
6.6 Examples of cooking
applications for power settings
The data in the table is for guidance
only.
ENGLISH
13