User manual

CLOCK FUNCTIONS
Clock functions
SYM-
BOL
FUNCTION DESCRIPTION
MINUTE MINDER Use to set a countdown. When the time ends, an
acoustic signal sounds. This function has no effect
on the operation of the oven.
DURATION Use to set how long the oven operates.
END Use to set when the oven stops.
TIME OF DAY Shows the time. To set, change or check the time.
Refer to "Setting and changing the time of day".
SETTING THE CLOCK
FUNCTIONS
1.
Activate the appliance and set an
oven function and temperature (not
necessary for Minute minder and
Time of day).
2.
Touch again and again until the
display shows the necessary clock
function and the related symbol, for
example Minute minder
.
3.
Touch or to set the necessary
time.
When the set time ends, an acoustic sig-
nal sounds for 2 minutes. “00.00” goes on
in the display and the related function in-
dicator flashes. The appliance deactivates
automatically. Touch a sensor field to stop
the acoustic signal.
General instruction:
• If you set a clock function, the
symbol flashes for approximate-
ly 5 seconds. In these 5 sec-
onds, touch
or to set the
time.
• If you set the time, the symbol
continues to flash for approxi-
mately 5 seconds. After these 5
seconds, the symbol comes on.
The time starts to count down
for Minute minder. For Duration
and End the time starts to count
down after the function starts.
• If you want to delay the start of
the cooking time use End func-
tion
.
• If you want to end cooking ear-
lier (before end of clock func-
tions) use
.
ENGLISH 13