User manual

6. An acoustic signal sounds when steam cleaning is completed.
Touch a sensor field to stop the signal.
7. Wipe out the appliance with a soft cloth.
Remove water from the steam generator with the sponge and rub it dry.
Keep the door open for approximately 1 hour to let the appliance dry fully.
You can use the End function to delay start of the cleaning. Refer to "Setting the END".
Shelf support
You can remove the shelf support to clean the side walls.
Removing the shelf support
1. Carefully pull the support up and out of
the front catch.
2. Lightly move the support on the front
catch inwards.
3. Pull the support out of the rear catch.
Installing the shelf support
To install the shelf support follow the procedure in the opposite order.
Oven lamp
WARNING!
There is a risk of electrical shock.
The oven lamp and the lamp glass cover can be hot.
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or deactivate the circuit breaker.
24 Care and cleaning