KS8100001 FR Notice d'utilisation
www.aeg.com SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. CONSIGNES DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 AVANT LA PREMIÈRE UTILISATION . . . . . . . . . . . . . . . .
FRANÇAIS 3 1. CONSIGNES DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
www.aeg.com • • • • 2. gants de cuisine pour retirer ou enfourner des accessoires ou des plats allant au four. N’utilisez pas de nettoyeur vapeur pour nettoyer l'appareil. Avant toute opération de maintenance, déconnectez l'alimentation électrique. N'utilisez pas de produits abrasifs ni de racloirs pointus en métal pour nettoyer la porte en verre car ils peuvent rayer sa surface, ce qui peut briser le verre.
FRANÇAIS • • • • • • porte de l'appareil, particulièrement lorsque la porte est chaude. La protection contre les chocs des parties sous tension et isolées doit être fixée de telle manière qu'elle ne peut pas être enlevée sans outils. Ne branchez la fiche d'alimentation à la prise de courant qu'à la fin de l'installation. Assurez-vous que la prise de courant est accessible une fois l'appareil installé. Si la prise de courant est lâche, ne branchez pas la fiche d'alimentation secteur.
www.aeg.com • Au cours de la cuisson à la vapeur, n'ouvrez pas la porte. De la vapeur pourrait s'échapper. • N'utilisez aucun produit détergent pour nettoyer l'émail catalytique (le cas échéant). 2.3 Entretien et nettoyage 2.4 Éclairage interne AVERTISSEMENT Risque de blessure corporelle, d'incendie ou de dommage matériel à l'appareil. • Avant toute opération d'entretien, mettez à l'arrêt l'appareil et débranchez la fiche de la prise secteur. • Vérifiez que l'appareil est froid.
FRANÇAIS 7 3. DESCRIPTION DE L'APPAREIL 1 2 1 Bandeau de commande 3 2 Bac à eau 3 Programmateur électronique 9 4 4 Gril et résistance 3 5 5 Éclairage 2 6 1 7 8 6 Ventilateur et résistance 7 Générateur de vapeur avec cache 8 Support de grille amovible 9 Position des grilles 3.1 Accessoires Grille métallique Permet de poser des plats (à rôti, à gratin) et des moules à gâteau/pâtisserie. Plateau de cuisson Pour la cuisson de gâteaux et de biscuits/gâteaux secs.
www.aeg.com 4.2 Premier branchement Lorsque vous raccordez l'appareil à l'alimentation secteur ou après une coupure de courant, vous devez régler la langue, le contraste de l'affichage, sa luminosité ou pour et l'heure. Appuyez sur régler la valeur. Presser OK pour confirmer. 5. BANDEAU DE COMMANDE 5.1 Programmateur électronique 1 2 3 4 5 6 7 8 9 10 11 Les touches sensitives permettent de faire fonctionner l'appareil.
FRANÇAIS Touche sensitive Numéro Fonction Commentaire 7 Touche Haut Pour se déplacer vers le haut dans le menu. 8 OK Pour confirmer la sélection ou les réglages. Touche Accueil Pour remonter d'un niveau dans le menu. Pour afficher le menu principal, appuyez sur cette touche pendant 3 secondes. Heure et fonctions supplémentaires Pour régler d'autres fonctions.
www.aeg.com Symbole Fonction Cuisson par le poids L'affichage indique que le système de cuisson par le poids est en cours de fonctionnement ou que le poids peut être modifié. Chaleur et tenir Cette fonction est activée. 6. UTILISATION QUOTIDIENNE AVERTISSEMENT Reportez-vous aux chapitres concernant la sécurité. 6.1 Navigation dans les menus 1. 2. 3. Appuyez sur OK pour passer au sous-menu ou accepter le réglage. À tout moment, vous pouvez revenir au menu principal avec la touche .
FRANÇAIS Symbole 11 Sous-menu Utilisation Chaleur et tenir Lorsque l'appareil est allumé, vous pouvez activer cette fonction après avoir activé un mode de cuisson. Prolongement de la cuisson Active et désactive la fonction. Affichage contraste Ajuste le contraste de l'affichage par paliers. Affichage luminosité Ajuste la luminosité de l'affichage par paliers. Langue Règle la langue de l'affichage.
www.aeg.com Mode de cuisson Utilisation Eco Vapeur Intense Pour optimiser la consommation d'énergie durant la cuisson. Il est donc nécessaire de régler d'abord la durée de cuisson. Pour obtenir plus d'informations sur les réglages recommandés, reportez-vous aux tableaux de cuisson avec la fonction du four équivalente. Chaleur tournante humide Pour économiser de l'énergie lors de la cuisson d'aliments secs. Également pour cuire des pâtisseries dans des moules sur un seul niveau.
FRANÇAIS Mode de cuisson Eco Turbo gril 13 Utilisation Les fonctions Eco vous permettent d'optimiser la consommation d'énergie durant la cuisson. Il est donc nécessaire de régler d'abord la durée de cuisson. Pour obtenir plus d'informations sur les réglages recommandés, reportez-vous aux tableaux de cuisson avec le mode de cuisson équivalent. 6.4 Activation d'un mode de cuisson 1. 2. Allumez l'appareil. Sélectionnez le menu Modes de cuisson . Presser OK pour confirmer. 3. Réglez un mode de cuisson.
www.aeg.com 6.7 Économies d'énergie Cet appareil est doté de caractéristiques qui vous permettent d'économiser de l'énergie lors de votre cuisine au quotidien : • Chaleur résiduelle : – Lorsqu'un mode de cuisson ou un programme fonctionne, les résistances sont désactivées 10 % plus tôt (l'éclairage et le ventilateur continuent de fonctionner). Pour bénéficier de cette fonction, la durée de cuisson doit être supérieure à 30 mi- nutes ou vous devez utiliser les fonctions de l'horloge ( Durée , Fin ).
FRANÇAIS • Avec les fonctions Durée et Fin , vous devez d'abord définir le mode de cuisson et la température. Vous pouvez ensuite régler la fonction de l'horloge. • Vous pouvez utiliser les fonctions Durée et Fin simultanément si vous souhaitez mettre en fonctionnement et à l'arrêt automatiquement l'appareil à un moment donné. 7.2 Chaleur et tenir La fonction Chaleur et tenir conserve les aliments cuits au chaud à 80 °C pendant 30 minutes. Elle s'active à la fin de la cuisson.
www.aeg.com Activation de la fonction : 1. Allumez l'appareil. 2. Sélectionnez Cuisson assistée . Presser OK pour confirmer. 3. Sélectionnez la catégorie et le plat. Presser OK pour confirmer. 4. Sélectionnez Cuisson par le poids . Presser OK pour confirmer. 5. Le programme automatique démarre. Vous pouvez modifier le poids à tout ou pour moment. Appuyez sur modifier le poids. Lorsque la durée programmée est écoulée, un signal sonore retentit. Appuyez sur une touche sensitive pour arrêter le signal.
FRANÇAIS Informations utiles : • Tous les accessoires sont dotés de petites indentations dans le bas des bords droit et gauche afin d'augmenter la sécurité. Assurez-vous toujours que ces indentations se situent à l'ar- 17 rière de l'appareil. Les indentations sont également des dispositifs antibascule. • Le rebord élevé de la grille est un dispositif complémentaire pour empêcher les ustensiles de cuisine de glisser. 10. FONCTIONS SUPPLÉMENTAIRES 10.
www.aeg.com 3. Appuyez sur à plusieurs reprises jusqu'à ce que Touches Verrouil. s'affiche. 4. Presser OK pour confirmer. Désactivation de la fonction Touches Verrouil. : 1. 2. Appuyez sur la touche . Presser OK pour confirmer. 10.4 SET + GO La fonction SET + GO vous permet de régler un mode de cuisson (ou un programme) et de l'utiliser ultérieurement en appuyant une fois sur la touche sensitive. Activation de la fonction : 1. Allumez l'appareil. 2. Réglez un mode de cuisson. 3.
FRANÇAIS 19 • Nettoyez l'intérieur de l'appareil après chaque utilisation. Les salissures s'éliminent alors plus facilement et ne risquent pas de brûler. • En cas de salissures importantes, nettoyez à l'aide d'un nettoyant pour four. • Après chaque utilisation, lavez tous les accessoires et séchez-les. Utilisez un chiffon doux additionné d'eau chaude savonneuse. • Si vous disposez d'accessoires anti-adhésifs, ne les nettoyez pas avec des produits abrasifs, des objets pointus ni au lave-vaisselle.
www.aeg.com 3. Remontage du support de grille Pour remonter le support de grille, suivez la même procédure dans l'ordre inverse. 11.3 Système de génération de vapeur ATTENTION Séchez le générateur de vapeur après chaque utilisation. Épongez l'eau résiduelle. Ôtez toute trace de calcaire avec de l'eau et du vinaigre. Sortez le support de la prise arrière. Nettoyage du bac à eau et du générateur de vapeur : 1. Versez environ 250 ml de mélange eau/vinaigre via le bac à eau dans le générateur de vapeur.
FRANÇAIS 3 4 5 60º 4 Remontage de la porte de l'appareil 1. Maintenez la porte des deux côtés à un angle d'environ 60°. 2. Poussez simultanément les charnières de la porte au maximum dans les deux encoches situées en bas de l'appareil, à gauche et à droite. 3. Soulevez la porte jusqu'au point de résistance, puis ouvrez-la ensuite complètement. 4. 5. 11.5 Éclairage AVERTISSEMENT Il existe un risque d'électrocution. L'éclairage et le diffuseur en verre peuvent être très chauds.
www.aeg.com Problème Cause probable Solution L'appareil ne chauf- Le fusible a disjoncté. fe pas. Vérifiez que le fusible est bien la cause de l'anomalie. Si les fusibles disjonctent de manière répétée, faites appel à un électricien agréé. L'éclairage ne fonc- L'éclairage est défectueux. tionne pas. Consultez le paragraphe « Éclairage ». « Demo » s'affiche à Le mode démo est activé. l'écran et l'appareil ne chauffe pas. Le ventilateur ne fonctionne pas. 1. 2. 3.
FRANÇAIS min. 560 380-383 20 13 594 388 375 min. 550 594 380-383 380 252 594 567 20 13 min. 560 388 375 min.
www.aeg.com 594 20 380-383 13 388 375 380 388 380 min. 550 min.
FRANÇAIS 90° 25
www.aeg.com 13 20 2x3,5x25 14. INFORMATION SUR LA GARANTIE 14.1 EURO-LINE APPLIANCES INC. VALIDITE DE LA GARANTIE : EURO-LINE PREND EN CHARGE : GARANTIE COMPLETE DE DEUX ANS à partir de la date d’achat d’origine, piè-ces et main-d’oeuvre comprises, au pre-mier acquéreur de cet appareil Pièces de rechange et/ou main-d’oeuvre pour la réparation de vices de fabrication ou de matériaux. L’intervention doit être assurée par un atelier agréé Euro-Line (sauf spécifications contraires).
FRANÇAIS 2. Enlèvement ou livraison d’appareils volumineux devant être réparés. Les appareils sont conçus pour être réparés sur place, chez le client. EuroLine ne prend pas à sa charge les frais de déplacement et de maind’œuvre si le client réside à une distan-ce de plus de 50 km/30 miles ou si la durée du trajet du centre d’assistance le plus proche chez le client est supérieure à 30 minutes. Tout coût dépassant ces limites n’est pas couvert par la garantie.
892937715-B-062013 www.aeg.